Personalized web service recommendation through mishmash technique and deep learning model

Multimedia Tools and Applications - Discovering the relevant web services for specific applications in the dynamically changing business world becomes very critical. Researchers have used many...     

Cellulose nanoparticles synthesised from potato peel for the development of active packaging film for enhancement of shelf life of raw prawns (Penaeus monodon) during frozen storage

In this study, the cellulose nanoparticles (CNP) isolated from potato peel were used for reinforcement of polyvinyl alcohol (PVA)-based active packaging film. The above film was used to pack the raw prawns (Penaeus monodon) at −20 °C, and the colour change, protein content, TVB-N, TMA and microbial analysis were done at regular interval for prawns stored in CNP-PVA active packaging film. A significant difference was observed in the quality of prawns stored in potato CNP-PVA film compared with prawns packed and stored in polyethylene film. The newly designed active packaging with CNP and fennel seed oil enhanced the shelf life of prawns up to two months for both HOSO (head on shell on) prawn and PD (peeled and deveined) prawn. Hence, the study recommends the potato peel CNP-PVA film with fennel seed oil as better choice to extend the shelf life of the prawns during storage compared with polyethylene packaging.     

Macrophage Immunomodulation Through New Polymers that Recapitulate Functional Effects of Itaconate as a Power House of Innate Immunity

Itaconate (ITA) is an emerging powerhouse of innate immunity with therapeutic potential that is limited in its ability to be administered in a soluble form. A library of polyester materials that incorporate ITA into polymer backbones resulting in materials with inherent immunoregulatory behavior is developed. Harnessing hydrolytic degradation release from polyester backbones, ITA polymers result in the mechanism specific immunoregulatory properties on macrophage polarization in vitro. In a functional assay, the polymer-released ITA inhibits bacterial growth on acetate. Translation to an in vivo model of biomaterial associated inflammation, intraperitoneal injection of ITA polymers demonstrate a rapid resolution of inflammation in comparison to a control polymer silicone, demonstrating the value of sustained biomimetic presentation of ITA.     

Fast Parallel Reordering and Isomorphism Testing of k -Trees

In this paper two problems on the class of k -trees, a subclass of the class of chordal graphs, are considered: the fast reordering problem and the isomorphism problem. An O(log ² n) time parallel algorithm for the fast reordering problem is described that uses O(nk(n-k)/\kern -1ptlog n) processors on a CRCW PRAM proving membership in the class NC for fixed k . An O(nk(k+1)!) time sequential algorithm for the isomorphism problem is obtained representing an improvement over the O(n ² k(k+1)!) algorithm of Sekharan (the second author) [10]. A parallel version of this sequential algorithm is presented that runs in O(log ² n) time using O((nk((k+1)!+n-k))/log n) processors improving on a parallel algorithm of Sekharan for the isomorphism problem [10]. Both the sequential and parallel algorithms use a concept introduced in this paper called the kernel of a k -tree.     

In‐Situ Observation of the Formation of MnS during Solidification of High Sulphur Steels

A Confocal Scanning Laser Microscope equipped with a gold image furnace was used to directly observe the precipitation of MnS during solidification of high sulphur steels under isothermal conditions in the temperature region 1440 to 1480°C on the free surface of the steel melt. For the case of Al‐killed steels, below 1480°C MnS particles were found to precipitate with Fe forming simultaneously around them. This MnS containing structure continued to grow rapidly (264 μm/s) as a surface film. The film gradually changed, as the level of S in the melt decreased, into a eutectic structure (with lamella spacing of 2 μm) as predicted by thermodynamics. In Si‐ killed steels there was significantly lower tendency to form MnS both in terms of time until precipitation occurred and growth rate.     

Novel Short-chain Crosslinked Cationomeric Polyurethanes

Summary Novel PUs containing pyridinium moieties were synthesized by chain extending isocyanate endcapped prepolymers with N, N’-bis (2-hydroxyethyl) isonicotinamide. The pyridinium moieties in the PUs were chemically crosslinked using short-chain divalent quaternising agents. The polyurethane cationomers were characterized by spectral, thermal and mechanical analysis. Spectral results confirmed the quaternisation of tertiary nitrogen leading to crosslinking. Compared to conventional PUs, the crosslinked PU networks exhibited improved thermal stability. The damping value (i.e.) tan δ for cationomers were improved over a broad temperature range when compared to conventional PU.     

Experimental measurement of gain in erbium-doped fluoride fiber amplifier in the 850-nm signal band

In this letter, we report an efficient single-mode Er/sup 3+/ doped fluoride fiber amplifier (EDFFA) in the 850 mn signal band. The Ti-sapphire laser was used to pump the EDFFA at 792 mm with an estimated absorbed pump power of 35 mW. The EDFFA used a 4.2 meter long NA=0.39, /spl lambda//sub c/=850 nm fluoride fiber as the active medium. A peak gain of 25 dB was observed at 852 mm. The gain was measured for a 10 nm region between 847.5 mn and 857.5 nm. The 3 dB gain bandwidth is less than 3 nm. However, the gain exceeded 20 dB over wavelength region of at least 7.5 nm. The gain and the gain bandwidth can be further increased by optimizing the length of the active fiber.     

Thermal degradation of poly(dimethylsilylene) and poly(tetramethyldisilylene‐co‐styrene)

Thermal degradation of poly(dimethylsilylene) homopolymer (PDMS) and poly(tetramethyldisilylene‐co‐styrene) copolymer (PTMDSS) was investigated by pyrolysis‐gas chromatography and thermogravimetry (TG). PDMS decomposes by depolymerization, producing linear and cyclic oligomeric products, whereas PTMDSS decomposes by random degradation along the chain resulting in each monomeric product and various other combination products. The homopolymer was found to be much less stable than the copolymer. The decomposition mechanisms leading to the formation of various products are shown. The kinetic parameters of thermal degradation were evaluated by different integral methods using TG data. The activation energies of decomposition (E) for the homopolymer and the copolymer are found to be 122 and 181 kJ/mol, respectively, and the corresponding values of order of reaction are 1 and 1.5. The observed difference in the thermal stability and the values of the kinetic parameters for decomposition of these polymers are explained in relation with the mechanism of decomposition. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Observation of calcium aluminate inclusions at interfaces between Ca-treated,Al-killed steels and slags

The evolution of Al₂O₃-CaO inclusions on molten steel surfaces and at molten steel/slag interfaces was observed in-situ through a confocal scanning laser microscope (CSLM) equipped with a gold-image furnace. Depending on the slag chemistry, some of the initially liquid inclusions evolved into irregular Al₂O₃ or SiO₂-enriched inclusions during the separation across the interface. Inclusions were found to cluster at specific locations at the steel/slag interface. Unlike capillary-depression-driven clustering, which is observed on molten steel surfaces, a weak repulsive force opposes fluid-flow-driven clustering at the steel/slag interface. After clustering, the irregular solid inclusions were observed to agglomerate to form large aggregates. This article is based on a presentation given in the Mills Symposium entitled “Metals, Slags, Glasses: High Temperature Properties & Phenomena,” which took place at The Institute of Materials in London, England, on August 22–23, 2002.