The effect of support morphology on the reaction of oxidative dehydrogenation of ethane to ethylene at short contact times

The oxidative dehydrogenation of ethane is carried out in short contact time reactors over Pt and LaMnO₃ based catalysts supported on a large number of different ceramic substrates (45, 60 and 80 ppi foam monoliths and 200, 400, 600, 900 and 1200 cpsi honeycomb monoliths). Experimental results, obtained under the same conditions at varying the C₂H₆/O₂ ratio, showed that the highest performance in terms of ethylene selectivity and yield is always attained on LaMnO₃ catalysts. Furthermore, the results are significantly influenced by the morphology and cell density of the support, with 45 and 60 ppi foams and 400 and 600 cpsi honeycombs giving the best performance. The experimental results are explained by means of geometrical and fluid dynamic considerations on the support, and by means of a 2D mathematical model, which clearly indicates an optimal intermediate cell density for maximising ethylene selectivity and yield.     

Degradation of lincomycin in aqueous medium: Coupling of solar photocatalysis and membrane separation

The photocatalytic oxidation of a common antibiotic, the lincomycin was carried out in aqueous suspensions of polycrystalline TiO₂ Degussa P25 irradiated by sunlight. In order to improve the performance of the lincomycin degradation a hybrid system consisting of a solar photoreactor with the photocatalyst in suspension coupled with a membrane module, used to confine both photocatalyst and pollutants in the reaction environment, was tested.A preliminary study was carried out in order to determine some kinetics parameters of the drug photodegradation. The influence of initial substrate concentration on the lincomycin photooxidation rate was investigated. The photooxidation rate follows a pseudo-first order kinetics with respect to the lincomycin concentration under the used experimental conditions. The presence of the membrane reactor allows the catalyst separation and to operate in continuous mode as the membranes rejection for lincomycin and its oxidation products was quite high.     

Connexin 43 and Connexin 26 Involvement in the Ponatinib-Induced Cardiomyopathy: Sex-Related Differences in a Murine Model

Cardiac connexins (Cxs) are proteins responsible for proper heart function. They form gap junctions that mediate electrical and chemical signalling throughout the cardiac system, and thus enable a synchronized contraction. Connexins can also individually participate in many signal transduction pathways, interacting with intracellular proteins at various cellular compartments. Altered connexin expression and localization have been described in diseased myocardium and the aim of this study is to assess the involvement of Cx43, Cx26, and some related molecules in ponatinib-induced cardiac toxicity. Ponatinib is a new multi-tyrosine kinase inhibitor that has been successfully used against human malignancies, but its cardiotoxicity remains worrisome. Therefore, understanding its signaling mechanism is important to adopt potential anti cardiac damage strategies. Our experiments were performed on hearts from male and female mice treated with ponatinib and with ponatinib plus siRNA-Notch1 by using immunofluorescence, Western blotting, and proteomic analyses. The altered cardiac function and the change in Cxs expression observed in mice after ponatinib treatment, were results dependent on the Notch1 pathway and sex. Females showed a lower susceptibility to ponatinib than males. The downmodulation of cardiac Cx43, Cx26 and miR-122, high pS368-Cx43 phosphorylation, cell viability and survival activation could represent some of the female adaptative/compensatory reactions to ponatinib cardiotoxicity.     

Electrochemical characterization of 8-hydroxyquinoline-5-sulphonate/aluminium(III) aqueous solutions

8-Hydroxyquinoline-5-sulphonate/Al(III) aqueous solutions were studied both by potentiometric titrations and voltammetric measurements, in order to obtain the number, the stoichiometry and the stability constants of the complexes formed at equilibrium, and to evaluate the redox and (electro)kinetic properties of the free ligand and of the metal/ligand complexes. The complexes formed in 0.2 m (Na)Cl aqueous solution (stability log beta values ± standard deviation) are AlL⁺ (8.95 ± 0.05), AlL₂⁻ (17.43 ± 0.03) and AlL₃³⁻ (24.58 ± 0.05), where “L” denotes the free ligand in the completely deprotonated form (L²⁻, pK_a1 = 3.910 ± 0.008, pK_a2 = 8.319 ± 0.004). AlL₃³⁻ is the predominant Al(III) species in a very wide range of pH, metal and ligand concentrations and metal-to-ligand ratios. The free ligand shows an oxidation wave at 0.62 V versus SCE. The proposed oxidation mechanism includes a first reversible one-electron oxidation of the ligand, followed by a coupling reaction and by a second reversible one-electron oxidation, and finally by a decomposition reaction. The addition of Al(III) lowers the intensity of the oxidation wave due to the formation of the redox-inactive complex AlL₃³⁻. A residual low signal was attributed to the free ligand produced by the complex dissociation, AlL₃³⁻ = AlL₂⁻ + L²⁻. All the kinetic parameters involved in the ligand oxidation and in the complex disruption were calculated on the basis of the agreement between experimental and simulated linear sweep and cyclic voltammetries. Correctness of the mechanisms proposed was further confirmed “a posteriori” by the agreement between potentiometric and linear sweep voltammetric results. The low residual signal observed in the presence of fully formed complex was attributed to the free ligand produced by the complex dissociation, having a kinetic constant estimated 0.2 s⁻¹.     

Heat Induced Structure Modifications in Polymer‐Layered Silicate Nanocomposites

Summary: The success of the use of layered silicates in polymer nanocomposites, to improve physical and chemical properties is strictly related to a deeper knowledge of the mechanistic aspects on which the final features are grounded. This work shows the temperature induced structural rearrangements of nanocomposites based on poly[ethylene‐co‐(vinyl acetate)] (EVA) intercalated‐organomodified clay (at 3–30 wt.‐% silicate addition) which occur in the range between 75 and 350 °C. In situ high temperature X‐ray diffraction (HT‐XRD) studies have been performed under both nitrogen and air to monitor the modifications of the nanocomposite structure at increasing temperatures under inert/oxidative atmosphere. Heating between 75 and 225 °C, under nitrogen or air, causes the layered silicate to migrate towards the nanocomposite surface and to increase its interlayer distance. The degradation of both the clay organomodifier and the VA units of the EVA polymer seems to play a key role in driving the evolution of the silicate phase in the low temperature range. The structural modifications of the nanocomposites in the high temperature range (250–350 °C), depended on the atmosphere, either inert or oxidizing, in which the samples were heated. Heating under nitrogen led to deintercalation and thus a decrease of the silicate interlayer space, whereas exfoliation was the main process under air leading to an increase of the silicate interlayer space.

Heat induced structural modification of EVA‐clay nanocomposite under nitrogen and air.     

Efficient application identification and the temporal and spatial stability of classification schema

Motivated by the importance of accurate identification for a range of applications, this paper compares and contrasts the effective and efficient classification of network-based applications using behavioral observations of network-traffic and those using deep-packet inspection.Importantly, throughout our work we are able to make comparison with data possessing an accurate, independently determined ground-truth that describes the actual applications causing the network-traffic observed.In a unique study in both the spatial-domain: comparing across different network-locations and in the temporal-domain: comparing across a number of years of data, we illustrate the decay in classification accuracy across a range of application–classification mechanisms. Further, we document the accuracy of spatial classification without training data possessing spatial diversity.Finally, we illustrate the classification of UDP traffic. We use the same classification approach for both stateful flows (TCP) and stateless flows based upon UDP. Importantly, we demonstrate high levels of accuracy: greater than 92% for the worst circumstance regardless of the application.     

The influence of attentional engagement and spatial characteristics on time perception in virtual reality

Virtual Reality - Virtual reality (VR) is a simulation tool that is being used extensively to study the effects of training and perception. However, several studies have shown that some aspects of...     

Two is better than one: A diploid genotype for neural networks

In nature the genotype of many organisms exhibits diploidy, i.e., it includes two copies of every gene. In this paper we describe the results of simulations comparing the behavior of haploid and diploid populations of ecological neural networks living in both fixed and changing environments. We show that diploid genotypes create more variability in fitness in the population than haploid genotypes and buffer better environmental change; as a consequence, if one wants to obtain good results for both average and peak fitness in a single population one should choose a diploid population with an appropriate mutation rate. Some results of our simulations parallel biological findings.     

The labeled maximum matching problem

Given a graph G where a label is associated with each edge, we address the problem of looking for a maximum matching of G using the minimum number of different labels, namely the labeled maximum matching problem. It is a relatively new problem whose application is related to the timetabling problem. We prove it is NP-complete and present four different mathematical formulations. Moreover, we propose an exact algorithm based on a branch-and-bound approach to solve it. We evaluate the performance of our algorithm on a wide set of instances and compare our computational times with the ones required by CPLEX to solve the proposed mathematical formulations. Test results show the effectiveness of our procedure, that hugely outperforms the solver.     

Cubic B样条旋转曲面的自由绘制技术

随着基于样条曲线的模型逐渐成为CAGD的主要研究对象,进一步带动了高度自由曲面建模技术的发展.本文描述一个新颖、直观的旋转曲面绘制技术,它支持三次B样条的自由输入作为轮廓线,并通过提取的样点矢量以及最小方差逼近方法形成旋转轴,利用轴上测量点的切线方向确定各个圆平面,从而建立了平面上旋转坐标矩阵,最终插值空间球面样点生成双三次B样条曲面.实验结果有效地验证了此技术的高效性.