Comprehensive heat exchange model for a semiconductor laser diode

By measuring the total energy flow from an optical device, we can develop new design strategies for thermal stabilization. Here we present a comprehensive model for heat exchange between a semiconductor laser diode and its environment that includes the mechanisms of conduction, convection, and radiation. We perform quantitative measurements of these processes for several devices, deriving parameters such as a laser's heat transfer coefficient, and then demonstrate the feasibility of thermal probing for the nondestructive wafer-scale characterization of optical devices.     

Power sector development in India with CO2 emission targets: Effects of regional grid integration and the role of clean technologies

The power sector in India at present comprises of five separate regional electricity grids having practically no integrated operation in between them. This study analyses the utility planning, environmental and economical effects of integrated power sector development at the national level in which the regional electric grids are developed and operated as one integrated system. It also examines the effects of selected CO₂ emission reduction targets in the power sector and the role of renewable power generation technologies in India. The study shows that the integrated development and operation of the power system at the national level would reduce the total cost including fuel cost by 4912 million $, total capacity addition by 2784 MW, while the emission of CO₂, SO₂ and NO_x would be reduced by 231.6 (1.9%), 0.8 (0.9%), 0.4 (1.2%) million tons, respectively, during the planning horizon. Furthermore, the study shows that the expected unserved energy, one of the indices of generation system reliability, would decrease to 26 GWh under integrated national power system from 5158 GWh. As different levels of CO₂ emission reduction targets were imposed, there is a switching of generation from conventional coal plants to gas fired plants, clean coal technologies and nuclear based plants. As a result the capacity expansion cost has increased. It was found that wind power plant is most attractive and economical in the Indian perspective among the renewable options considered (Solar, wind and biomass). Copyright © 2003 John Wiley & Sons, Ltd.     

Effect of bismuth replacement at barium site in Y-Ba-Cu-O system

X-ray diffraction, electron paramagnetic resonance, microwave absorption and resistivity measurements were carried out on YBa_2−x Bi _x Cu₃O₇ (0≤x≤0·5) superconductors in order to study the effect of bismuth on the structural and superconducting properties. A decrease in sintering temperature increased the amount of impurity phase. Transition from an orthorhombic (superconducting) phase to tetragonal structure produced no significant change in EPR zero-field signal at liquid nitrogen temperature (LNT). The non-resonance signal height decreased on higher concentration of bismuth. Sintered YBa_2−x Bi _x Cu₃O₇ superconductor had a strong EPR zero-field signal at LNT. We have evaluated particle size from XRD and EPR studies. The average particle size was about 0·4μm.     

Corrosion Condition Evaluation at Muddy Creek Bridge

Corrosion rates were measured at the exposed spots of rebars near three corners of Muddy Creek Bridge located in northern West Virginia using a 3LP device. Also, chloride contents of the concrete samples taken from the vicinity of the spots were analyzed using a wet chemical method that had been developed in this study. The average corrosion rate over the three spots was 4.66 mA/m2, which is in the range of corrosion damage possible in 10–15 years. The average chloride content of the concrete over the three spots was 703 parts per million (ppm), which is well above the threshold limit value of 260 ppm. Although the corrosion rate measurement method using a 3LP device is by manual operation, it is found to be reliable and effective, and, thus, recommended for future studies of this kind of research. The wet chemical method developed in this study is found to be effective.     

An asymmetric line-axis compound parabolic concentrating single basin solar still

An asymmetric line-axis compound parabolic concentrating single basin solar still of concentration 1.15, exit aperture 0.24 metres and length 0.48 metres, 30° inclination and 60° half acceptance angle has been designed fabricated and tested.     

A genetic model for undifferentiated cell tumor formation: similar tumors formed by different cell lines transformed by the E1A oncogene

The activation of oncogenes and the mutation/deletion of suppressor genes may be involved in tumor heterogeneity. In an attempt to study tumor heterogeneity, we transformed cell lines from epithelial (PAM 212), mesenchymal (NIH-3T3), or melanocytic origin (L-BIOBR) with the wild type E1a oncogene. To make the cell lines tumorigenic, cells were infected with Harvey sarcoma virus carrying the v-H-ras oncogene. The transformed cells were injected into nude mice and the tumors studied by optical and electron microscopy. The tumors formed by v-H-ras-transformed cells consisted of epitheliod melanomas, spindle cells sarcomas and poorly-differentiated carcinomas, depending on the cell of origin. In contrast, the tumors obtained from cells also carrying the E1a oncogene showed a predominant small and undifferentiated cell pattern regardless of the cell of origin. We conclude that the E1a oncogene products induce a negative control of differentiation, independent of the cell type, and that tumors formed by cells carrying the E1a oncogene display an undifferentiated cell pattern.     

Cyclic variations in the permeability of the cell wall of Saccharomyces cerevisiae.

To study cell-cycle-related variations in wall permeability of Saccharomyces cerevisiae, two approaches were used. First, an asynchronous culture was fractionated by centrifugal elutriation into subpopulations containing cells of increasing size. The subpopulations represented different stages of the cell cycle as judged by light microscopy. Cell wall porosity increased when these subpopulations became enriched with budded cells. Secondly, synchronous cultures were obtained by releasing MATa cells from alpha-factor induced G1-arrest. These cultures grew synchronously for at least two generations. The cell wall porosity increased sharply in these cultures, shortly before buds became visible and was maximal during the initial stages of bud growth. It decreased in cells which had completed nuclear migration and before abscission of the bud had occurred. The porosity reached its lowest value during abscission and in unbudded cells. We examined the incorporation of mannoproteins into the wall during the cell cycle. SDS-extractable mannoproteins were incorporated continuously. However, the incorporation of glucanase-extractable mannoproteins, which are known to affect cell wall porosity, showed cyclic oscillations and reached its maximum after nuclear migration. This coincided with a rapid decrease in cell wall porosity, indicating that glucanase-extractable mannoproteins might contribute to this decrease.     

A green route for the acylation of resorcinol with acetic acid

2',4'-Dihydroxyacetophenone, also known as resoacetophenone, is a commercially important intermediate which is generally prepared by the acylation of resorcinol with acetic acid in the presence of a molar excess of zinc chloride, which leads to waste disposal problems. The most frequently used acylating agents such as acetic anhydride and acetyl chloride have several disadvantages and need to be replaced by cheap and benign agents. In this connection, acetic acid is a better choice but with a non-polluting and reusable catalyst. The synthesis of 2',4'-dihydroxyacetophenone from resorcinol and acetic acid was carried out in the presence of a variety of solid acid catalysts such as montmorillonite clay (K-10), dodecatungstophosphoric acid (DTP) supported on K-10, sulfated zirconia and ion exchange resins. Amongst these catalysts, Amberlyst-36, an ion exchange resin, was found to be the most effective. The effects of various parameters on the rate of reaction and selectivity were investigated to establish the intrinsic kinetics of the reaction. It was possible to deduce the adsorption equilibrium constant and rate constant simultaneously for the reaction including the corresponding energies of activation. The catalyst is reusable. The process is in consonance with the principles of green chemistry. Electronic Publication