A 150 MHz 0.6 μm BiCMOS superscalar microprocessor

An implementation of the Pentium microprocessor architecture in 0.6 μm BiCMOS technology is described. Power dissipation is reduced and performance is enhanced over the previous generation. Processor features, implementation technology, and circuit techniques are discussed. An internal clock rate of 150 MHz is achieved at 3.7 V and -55°C     

Effect of thiophosphoryl compounds as accelerators and coupling agents on the vulcanization of NR‐XNBR blend

The effect of a number of thiophosphoryl compounds [viz., bis(isobutyl) thiophosphoryl di‐, tri‐, and tetrasulfides and bis(dicyclohexyl) thiophopsphoryl di‐, tri‐, and tetrasulfides] on natural rubber (NR)‐carboxylated nitrile rubber (XNBR) blend was studied. All these thiophosphoryl compounds are capable of forming interrubber links leading to covulcanized blends which exhibit a fair degree of synergism with respect to physical properties, the maximum being obtained at the 25% NR and 75% XNBR blend composition. This is an obvious claim that the blend under investigation is technologically compatible, having some degree of interrubber interaction which is enhanced in case of two‐stage vulcanization. The existence of interrubber interaction is judged by the swelling experiment. The blend morphology assessed by SEM micrographs corroborates the foregoing observations and accounts for the significant improvement in physical properties of the blend vulcanizates, particularly in two‐stage vulcanization. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3286‐3299, 2002     

Developing a Dynamic Cluster Quantization based Lossless Audio Compression (DCQLAC)

In this paper, an approach has been made to produce a compressed audio without losing any information. The proposed scheme is fabricated with the help of dynamic cluster quantization followed by Burrows Wheeler Transform (BWT) and Huffman coding. The encoding algorithm has been designed in two phases, i.e., dynamic cluster selection (of sampled audio) followed by dynamic bit selection for determining quantization level of individual cluster. Quantization level of each cluster is selected dynamically based on mean square quantization error (MSQE). Bit stream is further compressed by applying Burrows Wheeler Transform (BWT) and Huffman code respectively. Experimental results are supported with current state-of-the-art in audio quality analysis (like statistical parameters (compression ratio, space savings, SNR, PSNR) along with other parameters (encoding time, decoding time, Mean Opinion Score (MOS) and entropy) and compared with other existing techniques.

     

Do Men Advance Faster Than Women? Debunking the Gender Performance Gap in Two Massively Multiplayer Online Games

Prior research on digital games illustrates a perceived gender gap in participation and performance, suggesting men as playing more and better than women. This article challenges the gender gap using longitudinal behavioral data of men and women in 2 MMOs in the United States and China. Results show that women advance at least as fast as men do in both games. Thus, perceived gender‐based performance disparities seem to result from factors that are confounded with gender (i.e., amount of play), not player gender itself. We conclude that the stereotype of female players as inferior is not only false, but also a potential cause for unequal participation in digital gaming.     

Text-dependent speaker verification using classical LBG,adaptive LBG and FCM vector quantization

An important task of speaker verification is to generate speaker specific models and match an input speaker’s utterance with these models. This paper focuses on comparing the performance of text dependent speaker verification system using Mel Frequency Cepstral Coefficients feature and different Vector Quantization (VQ) based speaker modelling techniques to generate the speaker specific models. Speaker-specific information is mainly represented by spectral features and using these features we have developed the model which serves as an important entity for determining the claimed identity of the speaker. In the modelling part, we used Linde, Buzo, Gray (LBG) VQ, proposed adaptive LBG VQ and Fuzzy C Means (FCM) VQ for generating speaker specific model. The experimental results that are performed on microphonic database shows that accuracy significantly depends on the size of the codebook in all VQ techniques, and on FCM VQ accuracy also depend on the value of learning parameter of the objective function. Experiment results shows that how the accuracy of speaker verification system is depend on different representations of the codebook, different size of codebook in VQ modelling techniques and learning parameter in FCM VQ.     

Taming the killer in the kitchen: mitigating household air pollution from solid-fuel cookstoves through building design

In this study, we attempt to mitigate household air pollution (HAP) through improved kitchen design. Field surveys were conducted in ten kitchens of rural western India, which were then modelled and simulated for dynamic indoor airflow network analysis. The simulated results were statistically clustered using principal component analysis and hierarchical agglomerative clustering, to construct a cumulative built environment parameter called ‘Built Factor’ for each kitchen, and subsequently a derivative matrix was developed. Categorization of better performing kitchens from this derivative matrix enabled in deriving the built parameter thresholds for a ‘better’ kitchen design. This derived kitchen showed 60 % reduction in PM2.5 peak concentration during cooking hours. The evaluation described here is essentially a “proof of concept”, that effective building design can be an alternative way to reduce HAP without the introduction of chimneys, improved cookstoves or shifting to cleaner fuel.     

Stress intensity factors for an interfacial crack between an orthotropic half-plane bonded to a dissimilar orthotropic layer with a punch

The plane strain problem of determining Stress Intensity Factors (SIF) for a moving interfacial Griffith crack between an elastic orthotropic half-plane and a dissimilar orthotropic layer with a moving punch situated along the boundary of the layer have been considered. The problem is reduced to the solution of three simultaneous singular integral equations with Cauchy-type singularities. Expressions for SIF for the case of a general loading are obtained. Numerical results for some particular cases are also presented graphically.     

Mixed convective heat transfer enhancement in a ventilated cavity by flow modulation via rotating plate

The present study numerically explores the mixed convection phenomena in a differentially heated ventilated square cavity with active flow modulation via a rotating plate. Forced convection flow in the cavity is attained by maintaining external fluid flow through an opening at the bottom of the left cavity wall while leaving it through another opening at the right cavity wall. A counter-clockwise rotating plate at the center of the cavity acts as an active flow modulator. Moving mesh approach is used for the rotation of the plate and the numerical solution is achieved using arbitrary Lagrangian-Eulerian finite element formulation with a quadrilateral discretization scheme. Transient parametric simulations have been performed for various frequency of the rotating plate for a fixed Reynolds number (Re) of 100 based on maximum inlet flow velocity while the Richardson number (Ri) is maintained at unity. Heat transfer performance has been evaluated in terms of spatially averaged Nusselt number and time-averaged Nusselt number along the heated wall. Power spectrum analysis in the frequency domain obtained from the fast Fourier transform analysis indicates that thermal frequency and plate frequency start to deviate from each other at higher values of velocity ratio (>4).     

Leveraging computation sharing and parallel processing in location-dependent query processing

A variety of research exists for the processing of continuous queries in large, mobile environments. Each method tries, in its own way, to address the computational bottleneck of constantly processing so many queries. In this paper, we introduce an efficient and scalable system for monitoring continuous queries by leveraging the parallel processing capability of the Graphics Processing Unit. We examine a naive CPU-based solution for continuous range-monitoring queries, and we then extend this system using the GPU. Additionally, with mobile communication devices becoming commodity, location-based services will become ubiquitous. To cope with the very high intensity of location-based queries, we propose a view oriented approach of the location database, thereby reducing computation costs by exploiting computation sharing amongst queries requiring the same view. Our studies show that by exploiting the parallel processing power of the GPU, we are able to significantly scale the number of mobile objects, while maintaining an acceptable level of performance.