Formation of oxidising species and their role in the viscosity loss of cereal beta-glucan extracts

The aim of this study was to determine the role of the formation of radicals and hydrogen peroxide in the viscosity loss of beta-glucan extracts from oat and barley. Radicals derived from endogenous H₂O₂ were formed spontaneously in all extracts. The decomposition of H₂O₂ by catalase had little or no effect on the viscosity, and the radical formation detected and measured by electron spin resonance (ESR) spectroscopy did not predict the shelf life of crude beta-glucan extracts. The addition of FeSO₄ accelerated the radical formation and viscosity loss, revealing the sensitivity of the extract viscosity towards catalysts for oxidation. Using 50% cadoxen in the extracts slowed down the viscosity loss in all extracts but still led to a 10–70% decrease of the initial viscosities during 4 weeks of storage. The results suggest that the viscosity loss may be a result from multiple mechanisms including chemical reactions during storage as well as aggregation and conformational changes.     

Tissue reactions of subcutaneously implanted mixture of ε-caprolactone-lactide copolymer and tricalcium phosphate. An electron microscopic evaluation in sheep

Biodegradable polymers, mainly derivates of -hydroxy acids, are widely used today in oral- and maxillofacial surgery, orthopedics, and other fields of surgery. These biomaterials are well tolerated by living tissue and fracture fixation devices made of polylactic or polyglycolic acid are clinically widely used today. Still, there are some problems in application of biodegradable polymers. Abacterial inflammatory reactions have been noticed after the clinical introduction of these devices. Both swelling and pain at the site of implantation have also been reported. The etiology of this inflammatory reaction is still unknown, despite the numerous studies. Therefore, the aim of the present study was to further characterize this inflammatory reaction in detail, by electronmicroscopy. We prepared a mixture of -caprolactone–lactide copolymer and tricalcium phosphate and placed it in the dermis in 12 sheep. Follow-up times were 9, 14, 24, and 52 weeks. We found that the mixture caused a mild inflammatory reaction. There were no signs of cell damage. Fibroblasts, macrophages, and eosinophils were found adjacent to the copolymer. The mixture is easy to handle and can be moulded into different shapes in room temperature. The results encourage us to continue our studies to develop a filling material for bone defects.     

Binary monolayers of single-stranded oligonucleotides and blocking agent for hybridisation

The hybridisation of thiol-modified single-stranded DNA (SH-ssDNA) embedded in lipoate or hydrophilic polymer monolayers on gold have been studied through the technique of surface plasmon resonance (SPR). SH-ssDNA and the blocking agents were co-adsorbed on gold from the same solution or the surface was post-treated with the blocking agents. The assembling process is allowed to take place for only 10 min. Binding of non-complementary and complementary DNA is dependent both on the blocking agent and on the assembling method used. The lowest non-complementary binding and the highest complementary binding of DNA was obtained with a layer assembled from a binary solution of SH-ssDNA and the lipoate blocking agent.     

Molecular approaches to study probiotic bacteria

Functional foods comprising probiotic bacteria are receiving increasing attention from the scientific community and science funding agencies [1]. An essential aspect relating to the functionality of probiotic-based foods is to develop molecular methods to determine the presence, activity and viability of probiotic bacteria in the human gastrointestinal (GI) tract [2]. The GI tract is composed of a complex ecosystem of various microbial habitats colonized by numerous different commensal micro-organisms. This indigenous gut microbiota is essential to the overall health of the host by performing important physiological functions. In particular, they protect against pathogenic bacteria and drive the development of the immune system during neonatal life. Further metabolic activities of the GI microbiota that beneficially affect the host include continued degradation of food components, vitamin production, and production of short chain fatty acids that feed the colonic mucosa. It is clear that factors such as diet, sickness, stress, or medication can result in loss of well-being of the host, and it is assumed that some of these symptoms are due to perturbation of what is termed the normal balance of the gut microbiota. Knowledge of the structure and function of the standard microbiota, and its response to diet, genetic background and lifetime of the host must be taken into account when designing probiotic-based functional foods. The application of molecular techniques for detection and identification of microbes has provided a major breakthrough in the analysis of microbial ecosystems and their function [3]. The successful application and further potential of these molecular methods to study probiotic bacteria and their impact on the standard GI microbiota is discussed below.     

Characterization of the ATP- and GTP-specific succinyl-CoA synthetases in pigeon. The enzymes incorporate the same alpha-subunit

Two succinyl-CoA synthetases, one highly specific for GTP/GDP and the other for ATP/ADP, have been purified to homogeneity from pigeon liver and breast muscle. The two enzymes are differentially distributed in pigeon, with only the GTP-specific enzyme detected in liver and the ATP-specific enzyme in breast muscle. Based on assays in the direction of CoA formation, the ratios of GTP-specific to ATP-specific activities in kidney, brain, and heart are approximately 7, 1, and 0.1, respectively. Both enzymes have the characteristic alpha- and beta-subunits found in other succinyl-CoA synthetases. Studies of the alpha-subunit by electrophoresis, mass spectrometry, reversed-phase high performance liquid chromatography, and peptide mapping showed that it was the same in the two enzymes. Characterization of the beta-subunits by the same methods indicated that they were different, with the tryptic peptide maps providing evidence that the beta-subunits likely differ along their entire sequences. Because the two succinyl-CoA synthetases incorporate the same alpha-subunit, the determinants of nucleotide specificity must reside within the beta-subunit. Determination of the apparent Michaelis constants showed that the affinity of the GTP-specific enzyme for GDP is greater than that of the ATP-specific enzyme for ADP (7 versus 250 microM). Rather large differences in apparent Km values were also observed for succinate and phosphate.     

Effects of granisetron with doxorubicin or epirubicin on ECG intervals

Commercially available serotonin-type 3 (5-HT3) receptor antagonists (ondansetron, granisetron, and tropisetron) have shown no clinically significant adverse effects on the cardiovascular system. In the dose-ranging evaluation of dolasetron, computer-generated ECGs revealed clinically asymptomatic prolongations of ECG intervals. We performed a clinical trial in which the possible changes in ECG intervals following a single 3-mg i.v. injection of granisetron and an injection of either doxorubicin or epirubicin were registered using computerized ECG analysis in cancer patients. A total of 30 patients who were designated to receive 3 mg granisetron i.v. for the prophylaxis of emesis induced by doxorubicin or epirubicin were entered into the study. Computer-generated ECG tracings were obtained before treatment, following the injection of 3mg granisetron, and immediately after doxorubicin or epirubicin injection. The mean PR interval duration increased from 160 to 166 ms after granisetron infusion (P=0.02). Doxorubicin and epirubicin did not potentiate this change. There was no statistically significant change in cardiac rhythm, QRS duration, or QTc intervals. The observed minor changes in the PR time following i.v. injection of granisetron do not seem to be of clinical relevance.     

Characterizing and optimizing poly-l-lactide-co-ε-caprolactone membranes for urothelial tissue engineering

Different synthetic biomaterials such as polylactide (PLA), polycaprolactone and poly-l-lactide-co-ε-caprolactone (PLCL) have been studied for urothelial tissue engineering, with favourable results. The aim of this research was to further optimize the growth surface for human urothelial cells (hUCs) by comparing different PLCL-based membranes: smooth (s) and textured (t) PLCL and knitted PLA mesh with compression-moulded PLCL (cPLCL). The effects of topographical texturing on urothelial cell response and mechanical properties under hydrolysis were studied. The main finding was that both sPLCL and tPLCL supported hUC growth significantly better than cPLCL. Interestingly, tPLCL gave no significant advantage to hUC attachment or proliferation compared with sPLCL. However, during the 14 day assessment period, the majority of cells were viable and maintained phenotype on all the membranes studied. The material characterization exhibited potential mechanical characteristics of sPLCL and tPLCL for urothelial applications. Furthermore, the highest elongation of tPLCL supports the use of this kind of texturing. In conclusion, in light of our cell culture results and mechanical characterization, both sPLCL and tPLCL should be further studied for urothelial tissue engineering.     

Ni- and CuNi-modified activated carbons and ordered mesoporous CMK-3 for furfural hydrotreatment

In this paper, various carbon materials such as activated carbons and mesoporous carbon material CMK-3 modified with nickel and copper, are investigated in the production of a potential biofuel 2-methylfuran with furfural hydrotreatment. Deep characterization of the prepared catalysts revealed differences in pore size, surface area, and metal particle size. Furthermore, the acidity of the catalysts varied significantly affecting the product distribution. Very high activity and selectivity towards 2-methylfuran was achieved with two steam activated carbons (Norit RB4C and Darco) and ordered mesoporous carbon material CMK-3 modified with copper and nickel. 2-Methylfuran yield as high as 60.2% was achieved with 5/5 wt% CuNi/RB4C in 2 h at 230 °C. The operation in slurry phase was observed to promote the reaction towards 2-methylfuran.     

The copolymer of ε-caprolactone-lactide and tricalcium phosphate does not enhance bone growth in mandibular defect of sheep

In the field of craniomaxillofacial and orthopaedic surgery there is a constant need for bone or bone substitute. At the present, the most effective way to enhance bone healing clinically is to use autogenous bone grafts. The problems associated with the use of these autografts are donor site morbidity, limited supply and need for a second operative site. Currently there are several different synthetic products commercially available in the market; nevertheless, none of them is ideal for filling bone defects. Therefore, search for new synthetic materials for bone replacement is necessary. A mixture of tricalcium phosphate (TCP) and ε-caprolactone-lactide copolymer P(ε -CL/DL-LA) was prepared and implanted in critical size mandibular bone defects in twelve sheep. Contralateral side was used as a control. Follow-up times for histological and radiological studies were 9, 14, 24 and 52 weeks. We found that the implanted material did not enhance bone formation compared to control site. We also confirmed that defect size was of critical size, since there was no complete healing of the control site either. The results do not encourage us to continue our studies with the mixture of TCP and P(ε-CL/DL-LA) as a filling material for bone defects. Therefore the search for the ideal material is still ongoing.     

Nutrient intake and blood pressure in the Dietary Intervention Study in Children

Delineating the role that diet plays in blood pressure levels in children is important for guiding dietary recommendations for the prevention of hypertension. The purpose of this study was to investigate relationships between dietary nutrients and blood pressure in children. Data were analyzed from 662 participants in the Dietary Intervention Study in Children who had elevated low-density lipoprotein cholesterol and were aged 8 to 11 years at baseline. Three 24-hour dietary recalls, systolic pressure, diastolic pressure, height, and weight were obtained at baseline, 1 year, and 3 years. Nutrients analyzed were the micronutrients calcium, magnesium, and potassium; the macronutrients protein, carbohydrates, total fat, saturated fat, polyunsaturated fat, and monounsaturated fat; dietary cholesterol; and total dietary fiber. Baseline and 3-year longitudinal relationships were examined through multivariate models on diastolic and systolic pressures separately, controlling for height, weight, sex, and total caloric intake. The following associations were found in longitudinal analyses: analyzing each nutrient separately, for systolic pressure, inverse associations with calcium (P < .05); magnesium, potassium, and protein (all P < .01); and fiber (P < .05), and direct associations with total fat and monounsaturated fat (both P < .05); for diastolic pressure, inverse associations with calcium (P < .01); magnesium and potassium (both P < .05), protein (P < .01); and carbohydrates and fiber (both P < .05), and direct associations with polyunsaturated fat (P < .01) and monounsaturated fat (P < .05). Analyzing all nutrients simultaneously, for systolic pressure, direct association with total fat (P < .01); for diastolic pressure, inverse associations with calcium (P < .01) and fiber (P < .05), and direct association with total and monounsaturated fats (both P < .05). Results from this sample of children with elevated low-density lipoprotein cholesterol indicate that dietary calcium, fiber, and fat may be important determinants of blood pressure level in children.