Performance of a new pipe material UHMWPE against disinfectant decay in water distribution networks

Clean Technologies and Environmental Policy - The concentration of any disinfectant is a major parameter which is used to evaluate the quality of water. Chlorine is the most common disinfecting...     

Synthesis and characterization of conducting copolymers from aniline and o‐anisidine in HCl solutions

Conducting poly(aniline‐co‐o‐anisidine) (PAS) films with different ratios of aniline units in the polymer chain were prepared by oxidative polymerization of different molar ratios of aniline and o‐anisidine in 1 M HCl using cyclic voltammetry. Due to the much higher reactivity of o‐anisidine, the structure and properties of PASs were found to be dominated by the o‐anisidine units. The polymerization of poly‐o‐anisidine and PASs followed zero‐order kinetics with respect to formation of the polymer (film thickness) and the autocatalytic polymerization of aniline was completely inhibited. In contrast to polyaniline, a decrease in the polymerization temperature was found to increase the amount of copolymer formed and its redox charge. The presence of aniline units in PASs led to a pronounced increase in the molecular weight and conductivity, and a decrease in the solubility in organic solvents. Repetitive charging/discharging cycles showed that PASs resist degradation more than polyaniline. Copyright © 2003 Society of Chemical Industry     

Induction of mosaic sex-linked recessive lethals in the different germ cell stages of Drosophila melanogaster by bleomycin

The dead-end filtration characteristics of the dimorphic yeast Kluyveromyces marxianus var. marxianus (formerly fragilis) NRRLy2415 were investigated for a range of mean cell morphologies, ranging from predominantly yeast-like to predominantly filamentous. Semiautomated image analysis was used to measure the mean cell specific surface area, Sv, and the mean ratio of cell length to equivalent cylindrical diameter, Ldm, in each broth. The method of Ju and Ho (Biotechnol. Bioeng. 1988, 32, 95-99) was used to show that for broths with Ldm values between 1.72 and 10.03, the voidage of cell pellets formed by centrifugation increased with increasing Ldm. In the pressure range 30-180 kPa, the specific filter cake resistance, alpha, was found to be related to pressure, DeltaP, through the equation alpha = alpha0(1 + kcDeltaP). The dependence of alpha0/Sv2 on Ldm was found to be qualitatively consistent with the pellet voidage data and the Carman-Kozeny equation. Considerably better agreement with the experimental data was obtained when the Kozeny constant, K, was treated as variable and related to Ldm through the equation K = 4.83 + 7.08 log10 Ldm. The cake compressibility constant, kc, was found to increase with increasing Ldm, a phenomenon consistent with the wide range of voidages that can be displayed by beds of long cylinders.     

Composition Dependence and Irradation Effects on Residual Resistivity in Cu-Al Alloys

Residual electrical resistivity due to short-range order has been calculated for Cu100-xAlx (x=9.13,13.56, 14.5 and 14.76 in at pct) alloys using pseudopotential approach, and the results have been discussed in the light of experimental studies of the local-order structure of these alloys. In case of Cu85.5Al14.5, change in the total residual electrical resistivity due to neutron-irradiation effects has been estimated by including contributions from the short-range order and static atomic displacement correction. Our results show a decrease in the residual resistivity in the irradiated Cu-Al solid solution as compared to the unirradiated sample. This is in accordance with the experimental results     

Software for dynamic reconfigurable order picking systems

This paper describes an approach, conceptual framework, and software architecture for dynamic reconfiguration of the order picking system. The research and development project was sponsored by the Material Handling Research Center (MHRC), a National Science Foundation sponsored Cooperative Industry/University Research Center. The storage configuration is assumed to be an in-the-aisle order picking system in which stockkeeping units (SKUs) can occupy variable capacity storage locations and stock-splitting is allowed among zones (clusters). The product mix may include multiple product families with different life cycles, correlated demand within families and commonality of demand across families.     

Corrosion Control by water‐soluble extracts from leaves of economic plants

Water extracts from leaves of date palm, phoenix dactylifera, henna, Lawsonia inermis, and corn, Zea mays, were tested as corrosion inhibitors for steel, aluminum, copper and brass in acid chloride and sodium hydroxide solutions using weight loss, solution analysis and potential measurements. The inhibition action was found to critically depend on metal type and solution composition. Only, date palm and henna extracts were found highly effective in reducing corrosion rate of steel in acid chloride solutions and aluminum in sodium hydroxide solutions. The inhibition efficiency increased with increasing the concentration of the extract. The inhibition was interpreted in terms of chemisorption of some active ingredients in the leaves according to Temkin isotherm.     

Tumor size and prognosis in aggressively treated osteosarcoma

PURPOSE: The aim of this retrospective analysis was to investigate the prognostic significance and optimal measures of tumor size in osteosarcoma treated with intensive neoadjuvant chemotherapy. PATIENTS AND METHODS: Initial anterior-posterior (AP) and lateral x-ray films of 128 patients treated within the trials Cooperative Osteosarcoma Study (COSS)-80, -82, and -86, were evaluated for the following three tumor diameters: length, width, and depth. Metastasis-free survival (MFS) analyses were performed in univariate and multivariate models with one, two, and three dimensions of the tumor as absolute or relative measures (tumor length, referred to bone length, plane and volume to body-surface area). RESULTS: Univariate analyses of MFS showed a high prognostic significance of all absolute measures. Relative measures, at best, showed a comparable predictive value. Cox regression analysis indicated the high prognostic significance of absolute tumor volume (ATV; P < .0001) and histologic response (P < .0001). None of 19 patients with an ATV < or = 70 cm3 and only four of 53 with an ATV < or = 150 cm3 relapsed, while in patients with an ATV more than 150 cm3, the relapse rate remained 40% to 60%, irrespective of further increase in volume. CONCLUSION: Initial tumor size is an important and easily obtainable prognostic factor in osteosarcoma and may serve as a basis for risk-adapted therapy. It is best represented by the absolute three-dimensional measure ATV. There is a cut-off point regarding the incidence of metastases at a tumor volume of approximately 150 cm3 as calculated from two-plane x-ray films.     

A novel chaotic Henry gas solubility optimization algorithm for solving real-world engineering problems

The paper proposes a novel metaheuristic based on integrating chaotic maps into a Henry gas solubility optimization algorithm (HGSO). The new algorithm is named chaotic Henry gas solubility optimization (CHGSO). The hybridization is aimed at enhancement of the convergence rate of the original Henry gas solubility optimizer for solving real-life engineering optimization problems. This hybridization provides a problem-independent optimization algorithm. The CHGSO performance is evaluated using various conventional constrained optimization problems, e.g., a welded beam problem and a cantilever beam problem. The performance of the CHGSO is investigated using both the manufacturing and diaphragm spring design problems taken from the automotive industry. The results obtained from using CHGSO for solving the various constrained test problems are compared with a number of established and newly invented metaheuristics, including an artificial bee colony algorithm, an ant colony algorithm, a cuckoo search algorithm, a salp swarm optimization algorithm, a grasshopper optimization algorithm, a mine blast algorithm, an ant lion optimizer, a gravitational search algorithm, a multi-verse optimizer, a Harris hawks optimization algorithm, and the original Henry gas solubility optimization algorithm. The results indicate that with selecting an appropriate chaotic map, the CHGSO is a robust optimization approach for obtaining the optimal variables in mechanical design and manufacturing optimization problems.

     

Attitudes towards mobile banking: are there any differences between users and non-users?

Extant research has focused on monitoring the behaviour of people who use mobile banking (MB) but it has paid little attention to understanding the impact of information technology usage behaviour due to cultural differences. Humans are the weakest link in information technology adoption; past research has shown that not all users are predisposed to change their behaviour radically and adopt new channels of banking. This paper examines the demographic patterns of users and non-users of MB. The paper also investigates the attitudinal influences of users and non-users of MB based on innovation attributes. Using empirical research, the study identifies constructs of innovation attributes that were perceived to be significantly different among the users and non-users of MB. The study provides valuable insights into MB in Saudi Arabia that have not been previously investigated. From a practical point, findings of this study will be particularly useful to banks, financial institutions and telecommunication service providers.     

Modeling and Analysis of Temperature Compensation for Multi-temperature Zone Sintering Furnace Temperature Sensing

International Journal of Control, Automation and Systems - The surface temperature of workpieces in a multi-temperature zone sintering furnace is an important parameter to characterize the...