Estimation of wood char size at the end of devolatilization in a bubbling fluidized bed combustor

Two processes, namely shrinkage and primary fragmentation are known to be the major causes of size reduction of wood during its devolatilization in a fluidized bed combustor. A simple phenomenological model incorporating these effects to compute the average char size at the end of devolatilization is proposed. Experiments are conducted in a bubbling fluidized bed combustor using wood having three different shapes namely, cylinder, cuboid and sphere, to measure the average char size at the end of devolatilization. The model prediction of average char size agrees with the measured values within a deviation of 15%. An experimental correlation is derived to determine the number of fragments and is used to estimate the mean char size.     

Comparison and Identification of Static Electrical Terminal Fuel Cell Models

Six steady-state fuel cell electrical terminal models are compared using experimental data from an Avista Laboratories SR-12 500 W proton exchange membrane (PEM) fuel cell. The paper begins by reviewing the physical effects in a fuel cell. The proposed electrical terminal models are introduced in terms of these physical effects, parameterized for identification and compared using the measured data.     

Transformations of residual fertilizer P in a semi-arid tropical soil under eight-year peanut-wheat rotation

Long-term transformations of residual phosphorus (P) governs the availability of phosphorus to crops. Very limited information is available on the transformations of residual fertilizer P in semi-arid tropical soils under long-term crop rotations. Therefore, using sequential phosphorus fractionation procedure, we studied changes in labile and stable forms of inorganic and organic P in a semi-arid alluvial soil (Typic Ustisamments) after eight years of annual fertilizer P application either to one crop (alternate) or to both crops (cumulative) in a peanut (Arachis hypogaea) — wheat (Triticum aestivum) rotation.Total residual fertilizer P in soil (P recovered from P-fertilized minus control plots) ranged from 62 to 176 mg P kg^–1. In the alternate P treatments (P applied to peanut or wheat only), on an average of 3 rates of applied P (13, 26 and 39 kg P ha^–1), in surface (0–15 cm) and subsurface (15 to 30 cm) soil, respectively, residual fertilizer P consisted of 14.8 and 2.2% resin-P, 8.6 and 2.8% NaHCO₃-P, 6.3 and 0% microbial-P, 31.4 and 4.2% NaOH-P, 7.8 and 3.0% aggregate protected-P, 12.5 and 3.0% HCl-P, 3.4 and 0% H₂SO₄-P. The corresponding values for surface and subsurface soils of cumulative P treatments (P applied to both peanut and wheat) were: 12.8 and 1.6% resin-P, 6.9 and 2.3% NaHCO₃-P, 4.7 and 0% microbial-P, 32.5 and 4.2% NaOH-P, 5.6 and 2.0% aggregate protected-P, 14.8 and 3.8% HCl-P, 6.7 and 2.1% H₂SO₄-P. Considerable lower values for the 15–30 cm depth indicate only a very small movement of residual P to the subsoil.Significantly lower amount of fertilizer P (28% and 44%) found in labile (resin, NaHCO₃ and microbial P) and semi-labile (NaOH and sonicated NaOH P) fractions for the cumulative P treatment than alternate P treatment (35 and 46%, respectively) suggests that increased rates and frequency of applied P tend to enhance the conversion of residual P to stable forms which are less available to plants. About 12 to 19% of residual fertilizer P found as organic P in labile and semi-labile forms confirmed that organic P increased with long-term fertilizer management. In conclusion, the results of our study suggest that the alternate application of fertilizer P to a crop, as is shown for wheat, helps reduce the transformations of residual P to stable P forms.     

Sludge Production and Settleability in Biofilm-Activated Sludge Process

The sludge production and settleability have been estimated experimentally in a completely mixed biofilm-activated sludge reactor (hybrid reactor). A steady-state hybrid reactor was run at different stages of suspended biomass concentration (X) under constant values of influent substrate concentration (So) and hydraulic retention time (HRT). The values of X were gradually decreased in these stages until the system completely washed out of the suspended biomass and converted to pure biofilm reactor. As a result, the role of biofilm in the treatment gradually increased with an increase in the effluent substrate concentration (S). The experiment was supported by a mathematical expression for describing the sludge yield in the system under the previous conditions. The experimental and theoretical studies in the present work reveal that there is a critical phase of the hybrid system at which the system produces a high rate of excess sludge. That critical phase is found at a specific ratio between the suspended and the attached growth. Avoiding that critical phase enables the sludge production in the hybrid reactor to be reduced and optimized. Further, the minimum sludge production was found when the biofilm is theoretically inactive for chemical oxygen demand (COD) removal (S相似文献   

Determination of deuterium site occupancy in ZrCoD3 and its role in improved durability of Zr–Co–Ni deuterides against disproportionation

In the present study, we have for the first time reported the occupancy of deuterium in a new interstitial site of ZrCoD₃ which explain the hydrogen induced disproportionation behavior of ZrCo alloy. We have also reported the effect of Ni substitution on interstitial site occupancy of deuterium in ZrCo_1−xNi_xD₃, which in turn explains the improved durability of these Ni substituted deuterides against disproportionation. The crystal structure of the ZrCo_1−xNi_x (x = 0.0, 0.1, 0.2, 0.3) deuterides was investigated by X-ray powder diffraction and neutron diffraction methods. The XRD data reveals a single phase formation for all deuterides with varying Ni content (x). The neutron diffraction study shows that deuterium occupies a new site 8e in addition to 4c₂ and 8f₁. Additionally, the Zr–D distance in 8e site is shorter than that in ZrD₂. Therefore, increase in 8e site occupancy will in turn decreases the durability against disproportionation and vice-versa. Furthermore, the neutron diffraction reveals that occupancy of new 8e site decreases and its Zr–D distance increases with increase in Ni content, which explicate the higher durability against disproportionation for Ni rich compound.     

Phase diagram analysis of (U,Pu)O2−x sub-system

The high plutonium, hypo-stoichiometric fuel exists as two phase system at low temperatures. The partial phase diagram of (U,Pu)O_2−x with two coexisting cubic phases was extensively investigated in this work using theoretical models. The critical temperature of the miscibility gap varies with Pu/M and O/M of the system. Based on the similar miscibility gap behaviour observed in PuO_2−x system and the experimental data available on the phase boundaries of (U,Pu)O_2−x for various Pu/M, some semi-empirical relationships and solution models were developed. With the help of these relationships, ternary isothermal sections of the miscibility gap, O/M at different temperatures and the critical temperature of the miscibility gap of (U,Pu)_2−x for different Pu/M values were calculated. These calculated values were compared with the available literature data.     

Formation of BaCrO4 NanoCrystallites within Thermally Evaporated Sodium Bis-2-Ethylhexyl-Sulfosuccinate and Stearic Acid Thin Films

This paper describes the growth of barium chromate (BaCrO₄) nanocrystallites within thermally evaporated thin films of stearic acid (StA) and sodium bis-2-ethylhexyl-sulfosuccinate by a process of Ba²⁺ ion entrapment followed by in situ reaction with CrO₄²⁻ ions. Dense spherical assemblies of BaCrO₄ nanocrystallites of very uniform size (∼50 nm) were obtained within the two different host matrices. The spherical assemblies were composed of smaller (ca. 5–10 nm size) BaCrO₄ crystals indicating that efficient size control over crystal size may be exercised by the matrix. Contact angle measurements of the BaCrO₄–StA and BaCrO₄–sodium bis-2-ethylhexyl-sulfosuccinate films indicated that they were hydrophobic, thus pointing to the possible role of hydrophobic interaction between the StA and sodium bis-2-ethylhexyl-sulfosuccinate monolayer-covered BaCrO₄ crystals in the assembly process.     

A Novel Low-Temperature Synthesis of Nanosized NiZn Ferrite

Nanosized NiZn ferrite powder is synthesized by a low-temperature method, using a unique combination of citric acid and glycine. An appropriate molar ratio of both citric acid and glycine offers a low-temperature synthetic route by incorporating the complexation behavior of citric acid and the combustion nature of glycine. Thermal decomposition/controlled autocatalytic combustion of the composite gel occurs at a low temperature of around 175°C, with the evolution of a large amount of gases. Transmission electron microscopic studies showed that the average particle size of the ferrite obtained is ∼2.5 nm, with a narrow size distribution. Uniformly distributed fine-grained microstructure with low porosity is obtained for a sample sintered at 1000°C.