Computerized facility layout design

The paper describes a computerized facility layout designer, COMLAD II, for plant layout development. Besides developing an efficient layout, COMLAD II has useful features which allow fixing the departments, changing the shape of the departments and changing the length and width dimensions of the overall layout.     

Preparation and properties of silicone‐containing poly(methyl methacrylate) gels

Poly(methyl methacrylate) (PMMA) gels with varying amounts of silicone and solvent and constant amounts of crosslinker were prepared by solution free radical crosslinking copolymerization of methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDM), tetraethoxysilane (TEOS) and vinyltriethoxysilane (VTES) comonomer systems. They were then studied in benzene at a total monomer concentration of 3.5 mol L^?1 and 70 °C. The conversion of monomer, volume swelling ratio, weight fraction and gel point were measured as a function of the reaction time, silicone concentration and benzene content up to the onset of macrogelation. Structural characteristics of the gels were examined by using equilibrium swelling in benzene, gel fraction and Fourier‐transform infrared (FTIR) analysis. The morphology of the copolymers was also investigated by SEM. Based on the obtained results, it was concluded that the FTIR data did not have the capacity to show the presence of the VTES or TEOS moiety in these kinds of copolymers. On the other hand, the variation of weight fraction of gel, W_g, and its equilibrium volume swelling ratio in benzene, q_v, exhibited the same behaviour as that of MMA/EGDM copolymers. Also, the dilution of the monomer mixture resulted in an increase in the gel point and swelling degree and a decrease in the percent of conversion and gel fraction. Finally, TEOS is not an ideal silicone compound for reaction in the MMA/EGDM copolymerization system, whereas VTES is a suitable silicone comonomer for this system and it has been proved useful. Copyright © 2005 Society of Chemical Industry     

A strategy for the electro-organic synthesis of new hydrocaffeic acid derivatives

Electrochemical treatment processes can significantly contribute to the protection of the environment through the minimization of waste and toxic materials in effluents. From a pharmaceutical point of view and due to the existing resemblance between the electrochemical and biological reactions, it can be assumed that the oxidation mechanisms on the electrode and in the body share similar principles. In this paper, the application of electrochemical studies in the design of an environmentally friendly method was delineated for the new hydrocaffeic acid (HCA, 3,4-dihydroxy hydrocinnamic acid) derivatives synthesis at carbon electrodes in an undivided cell. In this cell, the EC mechanism reaction was involved, comprising two steps alternatively; (1) electrochemical oxidation and (2) chemical reaction. In particular, the electro-organic reactions of HCA, an important biological molecule, were studied in a water–acetonitrile (90:10 v/v) mixture in the presence of benzenesulfinic acid (3) and p-toluenesulfinic acid (4). The research included the use of a variety of experimental techniques, such as cyclic voltammetry, controlled-potential electrolysis and product spectroscopic identification.     

Clinical evaluation of respiratory motion compensation for anatomical roadmap guided cardiac electrophysiology procedures

X-ray fluoroscopically guided cardiac electrophysiological procedures are routinely carried out for diagnosis and treatment of cardiac arrhythmias. X-ray images have poor soft tissue contrast and, for this reason, overlay of static 3-D roadmaps derived from preprocedural volumetric data can be used to add anatomical information. However, the registration between the 3-D roadmap and the 2-D X-ray image can be compromised by patient respiratory motion. Three methods were designed and evaluated to correct for respiratory motion using features in the 2-D X-ray images. The first method is based on tracking either the diaphragm or the heart border using the image intensity in a region of interest. The second method detects the tracheal bifurcation using the generalized Hough transform and a 3-D model derived from 3-D preoperative volumetric data. The third method is based on tracking the coronary sinus (CS) catheter. This method uses blob detection to find all possible catheter electrodes in the X-ray image. A cost function is applied to select one CS catheter from all catheter-like objects. All three methods were applied to X-ray images from 18 patients undergoing radiofrequency ablation for the treatment of atrial fibrillation. The 2-D target registration errors (TRE) at the pulmonary veins were calculated to validate the methods. A TRE of 1.6 mm ± 0.8 mm was achieved for the diaphragm tracking; 1.7 mm ± 0.9 mm for heart border tracking, 1.9 mm ± 1.0 mm for trachea tracking, and 1.8 mm ± 0.9 mm for CS catheter tracking. We present a comprehensive comparison between the techniques in terms of robustness, as computed by tracking errors, and accuracy, as computed by TRE using two independent approaches.     

PNET “ONDM 2019” special issue

Photonic Network Communications -     

Synthesis,characterization, and supercapacitor studies of manganese (IV) oxide nanowires

One-dimensional manganese (IV) oxide (MnO₂) (～20 nm in average diameter) were synthesized by cathodic electrodeposition and heat treatment. The mechanism of electrodeposition and nanowire formation were discussed. The product was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Fourier transform infrared (FT-IR). Nanowires with varying lengths and diameters were found in TEM and SEM images of the sample. The results of N₂ adsorption–desorption analysis indicated that the BET surface area of the MnO₂ nanowires was 157 m² g^?1 and the pore size distributions were 2.5 and 4.5 nm. The electrochemical performances of the prepared MnO₂ as an electrode material for supercapacitors were evaluated by cyclic voltammetry and galvanostatic charge/discharge measurements in a solution of 0.5 M Na₂SO₄. The higher specific capacitance of 318 F g^?1 and good capacity retention of 86% were achieved after 1000 charge–discharge cycles had been observed for the MnO₂ nanowires electrode.     

Telesurgery QoS improvement over SDN based on a Type‐2 fuzzy system and enhanced cuckoo optimization algorithm

Telemedicine is a new area based on the information and communication technology for collecting, storing, organizing, retrieving and exchanging medical information. One of the most important applications of telemedicine is indeed telesurgery in which an efficient telecommunication infrastructure between the surgery room and remote surgeons need to be established. One of the most important issues to be tackled in telesurgery is to find favorable links for routing as well as providing high Quality of Service (QoS). In this paper, an efficient model based on the hybridization of Type‐2 Fuzzy System (T2FS) and Cuckoo Optimization Algorithm (COA) over the Software Defined Networks (SDN) is proposed in order to achieve optimal and reliable routes for telesurgery application. Using T2FS, the fitness of the links is determined; then, a COA is conducted over the Constraint Shortest Path (CSP) problem to find the best routes. Delay is considered as a CSP problem which is satisfied by trying to find the paths with minimum cost. Due to the NP‐completeness of the CSP problem, an Enhanced COA (so‐called E‐COA) is proposed and utilized as a metaheuristic solver. To the best of our knowledge, this paper is the first SDN‐based communication model that applies both T2FS and E‐COA for assigning proper costs to the network's links, and solves the consequence CSP problem according to the QoS requirement for telesurgery. The model also recognizes and preserves the second‐best routes in order to keep the reliability for such a critical application. In addition to the simulations, the performance evaluation is also conducted on a real experimental scenario. Many comparisons are carried out between the proposed model and other conventional methods, and the evaluation study shows the superiority of the proposed model on all the three QoS‐related metrics, i.e. average end‐to‐end delay, packet loss ratio and PSNR.