A derivation of the diffuse fraction's dependence on the clearness index

When averaged over many events having the same k_t, the average diffuse fraction carries an important quasi-universal functional dependence on the clearness index k_t. This paper presents a theoretical derivation of k(k_t). The atmosphere is modeled as having two homogeneous, nonselectively absorbing layers: an upper layer (roughly, the ozonosphere) with zero scattering and beam transmittance τ_u, and a lower layer with isotropic, nonselective scattering characterized by an albedo ω_l. After an analysis which traces generations of scattered photons, this model predicts a function which, upon adjusting ω_l and τ_u, fits the measured data closely.     

An experimental investigation of thick-sample effects in the measurement of directional-hemispherical transmittance of advanced glazing materials

Samples that are thick with respect to the measuring apparatus can pose problems in the measurement of directional-hemispherical transmittance. Due to the lateral displacement of light that these samples induce, traditional small-beam techniques are often no longer applicable. Broad-area irradiation offers a solution to these problems, but, in practice, imperfections in the extent and the uniformity of the irradiation can create errors. This paper reports measurement of the “detector-integrated inscattering function”, which describes the lateral displacement of light, for a number of thick samples over a range of incidence angles. This function is used to determine the minimum area that must be irradiated for an accurate broad-area irradiation transmittance measurement. The errors caused by transverse non-uniformities in the irradiance distributions produced by a state-of-the-art broad-area irradiation spectrophotometer are also reported. Errors caused by transverse irradiation non-uniformities are estimated, and transmittance measurements made with small-area and broad-area irradiation are compared. It is shown that in most cases small-area irradiation transmittance measurements underestimate the transmittance of thick samples due to outscattering, and that broad-area irradiation measurements using state-of-the-art irradiation optics can contain large errors of up to 20%, due to irradiance non-uniformities, particularly at large angles of incidence.     

Confidence intervals in repeated-measures designs: The number of observations principle.

Since the publication of Loftus and Masson’s (1994) method for computing confidence intervals (CIs) in repeated-measures (RM) designs, there has been uncertainty about how to apply it to particular effects in complex factorial designs. Masson and Loftus (2003) proposed that RM CIs for factorial designs be based on number of observations rather than number of participants. However, determining the correct number of observations for a particular effect can be complicated, given the variety of effects occurring in factorial designs. In this paper the authors define a general “number of observations” principle, explain why it obtains, and provide step-by-step instructions for constructing CIs for various effect types. The authors illustrate these procedures with numerical examples. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

LCD versus CRT displays: a comparison of visual search performance for colored symbols

Visual search performance for tactical symbols was examined with liquid-crystal (LCD) and cathode-ray tube (CRT) displays. Twenty-four adult participants (19 men, 5 women; mean age 41 years) searched for navy tactical display symbols on a map background. LCD and CRT displays of similar size and resolution (52 cm diagonal, 1280 x 1024 pixels) were used. Viewing angle (0 degrees vs. 60 degrees of azimuth), set size, target color (blue, red, or white), target presence, and search type (feature vs. conjunction) were also manipulated. Participants showed reduced sensitivity for red and blue symbols viewed 60 degrees off axis with the LCD relative to on-axis LCD, or to the CRT on or off axis. Colored symbols viewed off axis on the LCD produced longer response times in feature search and lower search efficiency in conjunction search. The results argue against the use of current LCD technology when off-axis viewing is likely and color coding is used.     

On measurement techniques for the spectral absorptance of glazing materials in the solar range

Advanced glazing materials may be thick, scattering, and inhomogeneous, and this poses problems for conventional absorptance measurement techniques. This paper describes a technique for accurately measuring the spectral absorptance of such materials. The measurement technique, in which the sample is mounted at the centre of an integrating sphere, was analysed and the errors that occur when applying the technique to large samples were analysed. The technique was used to measure absorptance of several materials, and the results are presented. For heterogeneous materials it is necessary to irradiate a relatively large area to get a representative sample. It was found that under certain conditions (depending on the sample absorptance), sample sizes as large as 30% of the sphere diameter can be used without incurring a prohibitively large error. This paper examines the effect of the finite absorptance of the rod supporting the sample, showing that it can be important unless certain precautions are taken.     

Discrete fourier series models for building auxiliary energy loads based on network formulation techniques

This paper presents a discrete Fourier series methodology for determining auxiliary energy loads in buildings. By applying network theory, flexible and efficient computer formulation techniques for the nodal frequency domain equations are developed. Two types of auxiliary sources are modelled; in the first one the room air temperature profile is specified, while in the second one an auxiliary heating/cooling source is modelled as a proportional control heat source. Unlike analytical frequency domain approaches such as those based on the Fourier transform, the discrete frequency domain methodology employed allows complex heat transfer mechanisms such as longwave radiant exchanges between room surfaces to be directly included in the formulation, and time-varying conductances such as that for a window with night insulation are also modelled. Thus, the methodology is particularly suitable for passive solar analysis.     

Processing blackcurrants dramatically reduces the content and does not enhance the urinary yield of anthocyanins in human subjects

Blackcurrant (BC) fruits are a rich source of biologically active anthocyanins but little is known of the anthocyanin content of commonly consumed BC products or how processing affects the absorption. We report that whereas fresh and frozen whole BC were a rich source of anthocyanins, containing 897 and 642 mg (100 g FW)⁻¹ of total anthocyanins the levels in all other products were substantially lower (0.05–10.3% of the levels in fresh fruit). Further, when the absorption and excretion of BC was assessed in volunteers consuming a portion (100 g) of frozen whole BC (642 mg total anthocyanins) and, 300 g of a BC drink made by diluting concentrated syrup (33.6 mg total anthocyanins), only small quantities of BC anthocyanins were excreted in urine (fruit, 0.053 ± 0.022%; drink, 0.036 ± 0.043%; mean percent urinary yield ± SD) and they were not detected in plasma. These data indicate that fresh and frozen BC, but not processed products, are rich sources of anthocyanins but, regardless of the food source, these anthocyanins are poorly bioavailable.