Diluted chemical bath deposition of CdZnS as prospective buffer layer in CIGS solar cell

In this study, dilute chemical bath deposition technique has been used to deposit CdZnS thin films on soda-lime glass substrates. The structural, morphological, optoelectronic properties of as-grown films have been investigated as a function of different Zn²⁺ precursor concentrations. The X-ray diffractogram of CdS thin-film reveals a peak corresponding to (002) plane with wurtzite structure, and the peak shift has been observed with the increase of the Zn²⁺ concentration upon formation of CdZnS thin film. From morphological studies, it has been revealed that the diluted chemical bath deposition technique provides homogeneous distribution of film on the substrate even at a lower concentration of Zn²⁺. Optical characterization has shown that the transparency of the film is influenced by Zn²⁺ concentration and when the Zn²⁺ concentration is varied from 0 M to 0.0256 M, bandgap values of resulting films range from 2.42 eV to 3.90 eV while. Furthermore, electrical properties have shown that with increasing zinc concentration the resistivity of the film increases. Finally, numerical simulation validates and suggests that CdZnS buffer layer with composition of 0.0032 M Zn²⁺ concentration would be a promising candidate in CIGS solar cell.     

Experimental study of interzonal natural convection through an aperture

The work was concerned with measuring natural convection through an aperture between two zones in an environmental chamber. Airflow rates between the two zones were measured using a tracer-gas decay technique, and the temperature at the centre of each zone was measured using thermocouples. Zone 1 was heated to various temperatures in the range 18–38°C using thermostatically controlled heaters. Zone 2 was unheated. A multipoint sampling unit was used to collect a tracer-gas sample from each zone. The concentration of SF₆ tracer was measured using an infra-red gas analyzer. The heat and mass flow rates between the two zones were calculated from the tracer-gas concentrations and temperature differences. Results were compared with values predicted by existing algorithms for two-zone enclosures. The mass flow rate through the aperture was found to be a function of the temperature difference between the two zones.     

Evaporated Thin Films of CdS and CdTe: Optimization for Photovoltaic Applications

Thin films of cadmium sulphide and cadmium telluride have been prepared by thermal evaporation under various conditions of deposition. These films have been characterized optically. electrically and for structure determination. The results of these characterizations along with the initial results of all thin film CdS/CdTe solar cells are presented in this paper     

A storage heat pump using an ‘ozone-friendly’ refrigerant

The paper describes the integration of a chemical and a vapour-compression heat pump for energy storage applications. The vapour-compression system is designed to operate using the UK cheap rate ‘Economy 7’ electricity tariff. The system is characterized thermodynamically using various refrigerant/absorbent pairs in the chemical storage circuit and an ozone-friendly refrigerant, R134a, in the vapour-compression circuit. Results indicate that the H₂O/Na₂S pair provides a high energy storage density and is the most suitable for use in this system. The paper also describes the design features of a domestic-sized version of this heat pump system. Air in the sunspace (conservatory) of a house was used as a heat source for the heat pump.     

Estimation of zone effective-volume using tracer-gas techniques

The concentration-decay and pulse-injection tracer-gas techniques were used to evaluate the effective volume of a zone. Measurements of airflow rates were carried out in an environmental chamber using SF₆ as the tracer gas. Results showed that the flow rate estimated from the concentration-decay technique is about 4·5–14·3% higher than actual flow rate if the effective volume of the chamber is assumed to be equal to the physical volume. The effective volume, estimated from tracer-gas measurements, was found to be about 1·5–2·7% higher than the physical volume of the chamber.     

Benchmarking performance of machine and deep learning-based methodologies for Urdu text document classification

Neural Computing and Applications - In order to provide benchmark performance for Urdu text document classification, the contribution of this paper is manifold. First, it provides a publicly...     

Purification and characterization of a fatty acid binding protein from human prostatic tissue

Epidemiological studies suggest the existence of a strong relationship between the incidence of prostatic cancer and the intake of dietary lipids in humans. However, very little information is available on intracellular fatty acid metabolism in human prostatic tissue. The objective of this study was to identify and subsequently characterize a fatty acid binding protein of human prostatic tissue. A fatty acid binding protein (FABP) was purified and characterized from human prostatic tissue. The purified FABP had an apparent molecular mass of 15.0±1.0 kDa as averaged from three different methods, sodium dodecylsulfate-polyacrylamide gel electrophoresis (SDS-PAGE), gel filtration and amino acid analysis. The pI value of the protein was determined to be 6.8. Scatchard analysis of fatty acid binding to the purified FABP from malignant prostatic tissue showed a Kd value of 0.53±0.02 μM for arachidonic acid (n=5). The Kd values of FABP purified from benign prostatic tissue were 0.57±0.02 μM for oleic acid and 0.51±0.04 μM for arachidonic acid (n=5). Fatty acid analysis revealed that the level of endogenously bound arachidonic acid was about 2.5-fold higher in FABP from malignant than from benign tissue. In addition, both malignant and benign tissues contained the same concentration of FABP. The concentrations of FABP in malignant and benign tissues were 19.2±1.8 and 21.4±2.1 μg per mg of total cytosolic protein, respectively. Characterization based on amino acid composition, isoelectric point and fluorescence with dansyl undecanoic acid suggests that the FABP may not be of the heart type, but is rather more closely related to the liver type. As malignant prostatic tissue produces more PGE₂ compared to benign tissue, our data suggest that FABP may help enhancing the synthesis of the prostaglandin in malignant tissue by facilitating arachidonic acid transport. A preliminary account of this work was presented at the Biochemical Society Meeting, London, December 16–18, 1991, and published as an abstract (Ref. 1).     

Double organic modification by 3‐chloropropyl and methyl groups on pure silica MCM‐41 and Ti‐MCM‐41: efficient catalyst for epoxidation of cyclododecene

Simultaneous surface modification by 3‐chloropropyl and methyl groups on the same Si atoms resulted in hydrophobic and highly ordered mesoporous silica with a very high surface area. ¹³C and ²⁹Si MAS NMR spectra indicate homogeneous grafting of chloropropyl and methyl groups in the silica matrix and this organically modified Ti‐MCM‐41 shows outstanding catalytic performance in the epoxidation of cyclododecene using tert‐butyl hydroperoxide as oxidant. This revised version was published online in July 2006 with corrections to the Cover Date.