Dysprosium doped copper oxide (Cu1-xDyxO) nanoparticles enabled bifunctional electrode for overall water splitting

The production of hydrogen, a favourable alternative to an unsustainable fossil fuel remains as a significant hurdle with the pertaining challenge in the design of proficient, highly productive and sustainable electrocatalyst for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Herein, the dysprosium (Dy) doped copper oxide (Cu_1-xDy_xO) nanoparticles were synthesized via solution combustion technique and utilized as a non-noble metal based bi-functional electrocatalyst for overall water splitting. Due to the improved surface to volume ratio and conductivity, the optimized Cu_1-xDy_xO (x = 0.01, 0.02) electrocatalysts exhibited impressive HER and OER performance respectively in 1 M KOH delivering a current density of 10 mAcm^?2 at a potential of ?0.18 V vs RHE for HER and 1.53 V vs RHE for OER. Moreover, the Dy doped CuO electrocatalyst used as a bi-functional catalyst for overall water splitting achieved a potential of 1.56 V at a current density 10 mAcm^?2 and relatively high current density of 66 mAcm^?2 at a peak potential of 2 V. A long term stability of 24 h was achieved for a cell voltage of 2.2 V at a constant current density of 30 mAcm^?2 with only 10% of the initial current loss. This showcases the accumulative opportunity of dysprosium as a dopant in CuO nanoparticles for fabricating a highly effective and low-cost bi-functional electrocatalyst for overall water splitting.     

Optimization of flow in additively manufactured porous columns with graded permeability

Chemical engineering systems often involve a functional porous medium, such as in catalyzed reactive flows, fluid purifiers, and chromatographic separations. Ideally, the flow rates throughout the porous medium are uniform, and all portions of the medium contribute efficiently to its function. The permeability is a property of a porous medium that depends on pore geometry and relates flow rate to pressure drop. Additive manufacturing techniques raise the possibilities that permeability can be arbitrarily specified in three dimensions, and that a broader range of permeabilities can be achieved than by traditional manufacturing methods. Using numerical optimization methods, we show that designs with spatially varying permeability can achieve greater flow uniformity than designs with uniform permeability. We consider geometries involving hemispherical regions that distribute flow, as in many glass chromatography columns. By several measures, significant improvements in flow uniformity can be obtained by modifying permeability only near the inlet and outlet.     

46,XX/69,XXX diploid-triploid mixoploidy with hypothyroidism and precocious puberty

We report a 20 month old female patient with diploid-triploid mixoploidy (46,XX/69,XXX) syndrome with hypothyroidism and precocious puberty. The triploid cell line was only expressed in the fibroblast culture and comprised the majority (95%) of the cells. Chromosome analysis of the fetal blood sample and peripheral blood sample were normal. The patient shows typical features of full triploidy (growth and severe mental retardation, cranial and facial dysmorphism, complete syndactyly of fingers 3/4, partial syndactyly of toes 2/3) and facial but no body asymmetry. At the age of 5 months central hypothyroidism and precocious puberty were diagnosed. Thin pigmented streaks were visible on the wrists and legs of the patient at the age of 16 months. This is the first patient reported so far with 46,XX/69,XXX mixoploidy suffering from hypothyroidism and precocious puberty.     

Modeling ion implantation of HgCdTe

Ion implantation of boron is used to create n on p photodiodes in vacancy-doped mercury cadmium telluride (MC.T). The junction is formed by Hg interstitials from the implant damage region diffusing into the MC.T and annihilating Hg vacancies. The resultant doping profile is n⁺/n^-/p, where the n⁺ region is near the surface and roughly coincides with the implant damage, the n^- region is where Hg vacancies have been annihilated revealing a residual grown-in donor, and the p region remains doped by Hg vacancy double acceptors. We have recently developed a new process modeling tool for simulating junction formation in MC.T by ion implantation. The interstitial source in the damage region is represented by stored interstitials whose distribution depends on the implant dose. These interstitials are released into the bulk at a constant, user defined rate. Once released, they diffuse away from the damage region and annihilate any Hg vacancies they encounter. In this paper, we present results of simulations using this tool and show how it can be used to quantitatively analyze the effects of variations in processing conditions, including implant dose, annealing temperature, and doping background.     

The murine immune response to the male-specific antigen mouse testicular cytochrome c

Male and female A/J mice were examined for their ability to elicit T lymphocyte and antibody (Ab) responses to the male-specific Ag, mouse testicular cytochrome c (Mt cyt). T lymphocytes from both male and female mice primed in vivo responded to the Ag in in vitro proliferation assays, and the dose-response curves were statistically indistinguishable. In addition, similar levels of Ab to Mt cyt were observed in immunized male and female mice. The B cells producing the Ab had switched isotypes to IgG1 and IgG2a, indicating that the self-reactive T helper (Th) cells in male mice were functional. Thus, male mice do not appear to be immunologically tolerant to Mt cyt, at least at the Th and B lymphocyte levels. No evidence for disease was found in male mice primed with Mt cyt. Major histocompatibility complex (MHC) class II-positive antigen-presenting cells are present in the testes and these were shown in vitro to process and present Mt cyt to a T cell hybridoma specific for the synthetic peptide Mt cyt 93-104. However, the hybridoma was not activated in the absence of exogenous Mt cyt 93-104 or Mt cyt, indicating that endogenous Mt cyt is not normally processed in sufficient quantity to effectively load MHC class II molecules with this particular Mt cyt-derived peptide. Notwithstanding any immunologic privilege of the testes, the lack of tolerance to Mt cyt and its failure to elicit an autoimmune disease could extend from the low levels of processed Mt cyt Ag available for T cell recognition. The T cell response elicited by Mt cyt contrasts the lack of response to mouse somatic cytochrome c which differs from Mt cyt at 13 amino acid residues and is expressed in most tissues and at higher levels.     

Polymorphonuclear neutrophil granulocyte chemotactic hyperresponsiveness in a case of canine acromegaly

Growth hormone (GH) has recently been shown to affect polymorphonuclear neutrophil granulocyte (PMN) function and to be secreted by mononuclear cells, indicating that the hormone may be active in an immunophysiologic network, acting as an endo- or paracrine priming agent. The purpose of the present study was to evaluate the chemotactic responsiveness of canine peripheral PMN in a dog with acromegaly, caused by spontaneous, progesterone-induced hypersecretion of GH and, secondary to this, a seven-fold increase in insulin-like growth factor I (IGF-I). The chemotactic responsiveness towards zymosan-activated serum (ZAS) and leukotriene B4 (LTB4) was evaluated at a time when the dog suffered from acromegaly and again 57 days after corrective surgery (ovariohysterectomy). The experiments showed that PMN from the patient exhibited enhanced chemotactic migration that appeared to be associated with the hypersomatotropic condition as judged from the reversibility of the phenomenon. The glucose intolerance and elevated serum alkaline phosphatase that were observed in the acromegalic dog were also shown to be reversible following surgery.     

The use of residuals in statistical modeling for fatigue-crackgrowth under constant amplitude loading

Various models have been proposed over the years to fit crack growth data. Many papers have appeared in which one or more models are mooted and fitted, and various assessments made of the quality of the fit. At the basic level the data are plotted, together with the fitted curve, to show agreement of experimental and predicted values. In this paper we suggest that it can be useful and informative to go one step further, examining the residuals, i.e., the differences between the experimental and predicted values. We draw attention to certain statistical methods for such critical assessment and show by example that this can reveal deficiencies in fit not otherwise obvious. In this way suitable modifications to the model can be suggested. Additional plots of estimated parameters are also shown to be informative about models     

Object-oriented DBMS requirements

The requirements on an object-oriented DBMS for management of information in a large, complex enterprise are presented. These requirements aid in the achievement of an environment characterized by data sharing, open architectures, application and data portability, and assurance of data integrity. They were defined from the point of view of a user of the DBMS; therefore they describe the expected functionality of the DBMS and do not specify the method of implementation to achieve this functionality. They encompass requirements on the data model, query and data manipulation languages, the system architecure, interfaces to the system, change management, and transaction management.