Dysprosium doped copper oxide (Cu1-xDyxO) nanoparticles enabled bifunctional electrode for overall water splitting

The production of hydrogen, a favourable alternative to an unsustainable fossil fuel remains as a significant hurdle with the pertaining challenge in the design of proficient, highly productive and sustainable electrocatalyst for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Herein, the dysprosium (Dy) doped copper oxide (Cu_1-xDy_xO) nanoparticles were synthesized via solution combustion technique and utilized as a non-noble metal based bi-functional electrocatalyst for overall water splitting. Due to the improved surface to volume ratio and conductivity, the optimized Cu_1-xDy_xO (x = 0.01, 0.02) electrocatalysts exhibited impressive HER and OER performance respectively in 1 M KOH delivering a current density of 10 mAcm^?2 at a potential of ?0.18 V vs RHE for HER and 1.53 V vs RHE for OER. Moreover, the Dy doped CuO electrocatalyst used as a bi-functional catalyst for overall water splitting achieved a potential of 1.56 V at a current density 10 mAcm^?2 and relatively high current density of 66 mAcm^?2 at a peak potential of 2 V. A long term stability of 24 h was achieved for a cell voltage of 2.2 V at a constant current density of 30 mAcm^?2 with only 10% of the initial current loss. This showcases the accumulative opportunity of dysprosium as a dopant in CuO nanoparticles for fabricating a highly effective and low-cost bi-functional electrocatalyst for overall water splitting.     

Optimization of flow in additively manufactured porous columns with graded permeability

Chemical engineering systems often involve a functional porous medium, such as in catalyzed reactive flows, fluid purifiers, and chromatographic separations. Ideally, the flow rates throughout the porous medium are uniform, and all portions of the medium contribute efficiently to its function. The permeability is a property of a porous medium that depends on pore geometry and relates flow rate to pressure drop. Additive manufacturing techniques raise the possibilities that permeability can be arbitrarily specified in three dimensions, and that a broader range of permeabilities can be achieved than by traditional manufacturing methods. Using numerical optimization methods, we show that designs with spatially varying permeability can achieve greater flow uniformity than designs with uniform permeability. We consider geometries involving hemispherical regions that distribute flow, as in many glass chromatography columns. By several measures, significant improvements in flow uniformity can be obtained by modifying permeability only near the inlet and outlet.     

Study of the effect of BDMA catalyst in the epoxy novolac curing process by isothermal DSC

Epoxy novolac/anhydride cure kinetics has been studied by differential scanning calorimetry under isothermal conditions. The system used in this study was an epoxy novolac resin (DEN431), with nadic methyl anhydride as hardener and benzyldimethylamine as accelerator. Kinetic parameters including the reaction order, activation energy and kinetic rate constants, were investigated. The cure reaction was described with the catalyst concentration, and a normalized kinetic model developed for it. It is shown that the cure reaction is dependent on the cure temperature and catalyst concentration, and that it proceeds through an autocatalytic kinetic mechanism. The curing kinetic constants and the cure activation energies were obtained using the Arrhenius kinetic model. A suggested kinetic model with a diffusion term was successfully used to describe and predict the cure kinetics of epoxy novolac resin compositions as a function of the catalyst content and temperature. Copyright © 2003 Society of Chemical Industry     

Continuous-wave quantum yields of various cobalamins are influenced by competition between geminate recombination and cage escape

Quantum yields of photolysis of the cobalt-carbon bond for three cobalamin compounds were measured with a continuous-wave laser at 442 nm under both aerobic and anaerobic conditions. Aerobically, the initial homolysis product, Co(II) cobalamin, is trapped by oxygen to form aquocobalamin. Use of an excess of the radical trapping reagent 2,2,6,6-tetramethyl-1-piperidinyloxyl, under anaerobic conditions, scavenges the carbon radical and allows detection of the cobalt(II) photoproduct. Quantum yields measured under anaerobic conditions for 5'-deoxyadenosylcobalamin (phi (Co-C alpha),442 = 0.20 +/- 0.03) and methylcobalamin (phi (Co-C alpha),442 = 0.35 +/- 0.03) are in agreement with the values obtained under aerobic conditions (phi (Co-C alpha),442 = 0.19 +/- 0.04 and phi (Co-C alpha),442 = 0.36 +/- 0.04, respectively). Additionally, the quantum yield values for 5'-deoxyadenosylcobalamin and its base-off derivative (phi (Co-C alpha),442 = 0.045 +/- 0.015) match those obtained on a nanosecond time scale [Chen, E., & Chance, M. R. (1990) J. Biol. Chem. 256, 12987-12994]. A comparison of quantum yields obtained anaerobically for 5'-deoxyadenosylcobalamin and methylcobalamin in H2O versus ethylene glycol shows a 4-fold decrease for the former cobalamin and no change for the latter. These quantum yields are evaluated in terms of time-independent radical separation distances.     

Modeling ion implantation of HgCdTe

Ion implantation of boron is used to create n on p photodiodes in vacancy-doped mercury cadmium telluride (MC.T). The junction is formed by Hg interstitials from the implant damage region diffusing into the MC.T and annihilating Hg vacancies. The resultant doping profile is n⁺/n^-/p, where the n⁺ region is near the surface and roughly coincides with the implant damage, the n^- region is where Hg vacancies have been annihilated revealing a residual grown-in donor, and the p region remains doped by Hg vacancy double acceptors. We have recently developed a new process modeling tool for simulating junction formation in MC.T by ion implantation. The interstitial source in the damage region is represented by stored interstitials whose distribution depends on the implant dose. These interstitials are released into the bulk at a constant, user defined rate. Once released, they diffuse away from the damage region and annihilate any Hg vacancies they encounter. In this paper, we present results of simulations using this tool and show how it can be used to quantitatively analyze the effects of variations in processing conditions, including implant dose, annealing temperature, and doping background.     

Spontaneous rise of fetal platelet counts despite increasing anti-HPA-5b antibodies

A 47-year-old woman with seronegative polyarthritis, diarrhea, and photosensitivity dermatitis was found to have Crohn's disease and pellagra. The presence of high values of 5-hydroxyindolacetic acid in the urine began the exhaustive investigations and finally enterotomy. No mass lesion was found. Argyrophilic cells were not increased in areas of inflamed intestinal mucosa or the normal mucosa. The disagreement between biochemical and histologic findings was attributed to sampling error. Antiinflammatory treatment for Crohn's disease was given and the gastrointestinal and articular symptoms improved, excretion of 5-hydroxyindolacetic acid returned to normal and there was no relapse of pellagra. Pellagra as a complication of Crohn's disease has been described in 4 cases; malnutrition and intestinal malabsorption were the proposed mechanisms for the niacin deficiency and pellagra of those patients. In the current case, the pathogenesis of pellagra may be accounted to wastage of tryptophan by an increased pool of intestinal argyrophilic cells, suggested by increased urinary excretion of 5-hydroxyindolacetic acid.     

Improved atrial function in bicaval versus standard orthotopic techniques in cardiac transplantation

Atrial geometry is preserved in the bicaval technique of cardiac transplantation. Using Doppler echocardiography, we investigated the impact of this technique on preservation of atrial function and found that echocardiographic indexes of atrial function are improved in bicaval cardiac transplants versus the standard orthotopic transplants.