Use of Zebrafish Embryo Assay to Evaluate Toxicity and Safety of Bioreactor-Grown Exopolysaccharides and Endopolysaccharides from European Ganoderma applanatum Mycelium for Future Aquaculture Applications

Natural mycelial exopolysaccharide (EPS) and endopolysaccharide (ENS) extracted from bioreactor-cultivated European Ganoderma applanatum mushrooms are of potential high commercial value for both food and adjacent biopharmaceutical industries. In order to evaluate their potential toxicity for aquaculture application, both EPS (0.01–10 mg/mL) and ENS (0.01–10 mg/mL) extracts were tested for Zebrafish Embryo Toxicity (ZFET); early development effects on Zebrafish Embryos (ZE) were also analyzed between 24 and 120 h post-fertilization (HPF). Both EPS and ENS are considered non-toxic with LC₅₀ of 1.41 mg/mL and 0.87 mg/mL respectively. Both EPS and ENS did not delay hatching and teratogenic defect towards ZE with <1.0 mg/mL, respectively. No significant changes in the ZE heart rate were detected following treatment with the two compounds tested (EPS: 0.01–10 mg/mL: 176.44 ± 0.77 beats/min and ENS: 0.01–10 mg/mL: 148.44 ± 17.75 beats/min) compared to normal ZE (120–180 beats/min). These initial findings support future pre-clinical trials in adult fish models with view to safely using EPS and ENS as potential feed supplements for supplements for development of the aquaculture industry.     

Deformation behavior of HCP Ti-Al alloy single crystals

Single crystals of Ti-Al alloys containing 1.4, 2.9, 5, and 6.6 pct Al (by weight) were oriented for 〈a〉 slip on either basal or prism planes or loaded parallel along the c-axis to enforce a nonbasal deformation mode. Most of the tests were conducted in compression and at temperatures between 77 and 1000 K. Trace analysis of prepolished surfaces enabled identification of the twin or slip systems primarily responsible for deformation. Increasing the deformation temperature, Al content, or both, acted to inhibit secondary twin and slip systems, thereby increasing the tendency toward strain accommodation by a single slip system having the highest resolved stress. In the crystals oriented for basal slip, transitions from twinning to multiple slip and, finally, to basal slip occurred with increasing temperature in the lower-Al-content alloys, whereas for Ti-6.6 pct Al, only basal slip was observed at all temperatures tested. A comparison of the critically resolved shear stress (CRSS) values for basal and prism slip as a function of Al content shows that prism slip is favored at room temperature in pure Ti, but the stress to activate these two systems becomes essentially equal in the Ti-6.6 pct Al crystals over a wide range of temperatures. Compression tests on crystals oriented so that the load was applied parallel to the c-axis showed extensive twinning in lower Al concentrations and 〈c+a〉 slip at higher Al concentrations, with a mixture of 〈c+a〉 slip and twinning at intermediate compositions. A few tests also were conducted in tension, with the load applied parallel to the c-axis. In these cases, twinning was observed, and the resolved shear for plastic deformation by twinning was much lower that that for 〈c+a〉 slip observed in compression loading. This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science and Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

Indirect field-oriented control of an induction motor in thefield-weakening region

A self-organized field-oriented induction machine controller that addresses problems encountered in the field-weakening region is presented. The field-oriented controller (FOC) is based on model reference adaptive principles but relies on samples of the state of the machine to determine control inputs. The proposed controller is compared with other approaches to field-weakening operation, and the advantages and limitations of each are discussed. Experimental results are presented for the classical and the self-organized approaches to field-weakening operation     

Prediction of processing-induced distortion of curved flanged composite laminates

It is well known that angles in composite parts contract as they are cooled down from the curing temperature, this is often referred to as spring-in. It is caused mainly by the significantly different thermal contractions and cure shrinkage's experienced between the fibre direction and the through-thickness direction during the manufacturing process. A number of works have reported on the spring-in of straight angle composite parts. However, little has been done to investigate the distortion of curved flanged composite parts, which will distort differently owing to the introduction of the additional curvature, thus constraint.

In the present work, the distortion of the circularly curved flanged laminates is studied numerically. The finite element method is used to predict the processing-induced distortion of the part with two different approaches. In the first approach, the shear angles of the composite plies are predicted by a draping analysis. The effect of the fibre shearing on the mechanical properties of the laminates is considered in the model used to predict the distortion. The second simplified approach assumes that the in-plane properties of the laminates are isotropic. The results obtained by these two approaches are compared with those obtained experimentally.     

Nonlinear circuit analysis using the method of harmonic balance—A review of the art. Part I. Introductory concepts

The harmonic balance method is a technique for the numerical solution of nonlinear analog circuits operating in a periodic, or quasi-periodic, steady-state regime. The method can be used to efficiently derive the continuous-wave response of numerous nonlinear microwave components including amplifiers, mixers, and oscillators. Its efficiency derives from imposing a predetermined steady-state form for the circuit response onto the nonlinear equations representing the network, and solving for the set of unknown coefficients in the response equation. Its attractiveness for nonlinear microwave applications results from its speed and ability to simply represent the dispersive, distributed elements that are common at high frequencies. The last decade has seen the development and application of harmonic balance techniques to model analog circuits, particularly microwave circuits. The first part of this paper reviews the fundamental achievements made during this time. The second part covers the extension of the method to quasi-periodic regimes, optimization analysis, and practical application. A critical assessment of the various types of harmonic balance techniques is given. The different sampling and Fourier transform methods are compared, and numerical speed and precision results are given enabling a quantitative analysis of the merits of the major variants of the harmonic balance technique. Examples of designs which have been modeled using the harmonic balance technique and built both in hybrid and MMIC form are presented.     

Physiologic correlates to running performance in pre-pubertal distance runners

In adults, four major variables have been shown to be associated with success in distance running performance: submaximal oxygen consumption (running economy), peak oxygen consumption (Peak VO2), ventilatory threshold (VT) and fractional utilisation (FU). The primary aim of this study was to describe the relationship between the 3000 m race times of run-trained prepubertal boys to these four variables. Thirteen male run-trained pre-pubertal boys (age 11.7 +/- 1.1 yrs, mean +/- SD), volunteered to take part in a 3000 m time trial and laboratory assessment, consisting of treadmill running at four submaximal speeds (8, 9.6, 11.2 and 12.8 km.h-1) as well as a peak VO2 test. The group demonstrated a heterogeneous array of peak VO2 data. A high level of association (p < 0.05) was found between mass-relative peak VO2 and 3000 m time trial results (r = -0.83). In addition ventilatory threshold expressed as %peak VO2, VO2 at VT and estimated velocity at VT was also highly related to 3000 m time trial (r = -0.78, -0.77 and -0.77) respectively. Fractional utilisation (%peak VO2) was significantly (p < 0.05) associated with race time at the final two submaximal running speeds only (11.2 and 12.8 km.h-1) (r = 0.61 and 0.67, respectively). Respiratory Exchange Ratio (RER) was also found to be significantly (p < 0.05) associated with 3000 m race time at 11.2 and 12.8 km.h-1. Overall peak VO2 appeared to be the single most important factor associated with success at 3000 m.     

Evaluating reactivity to ecological momentary assessment during smoking cessation.

Ecological momentary assessment (EMA) consists of assessing phenomena in real time in the natural environment. EMA allows for more fine-grained analyses of addictive behavior and minimizes threats to internal validity, such as recall biases and errors. However, because of the intensive monitoring involved in EMA, measurement reactivity is a concern. To test whether EMA with palmtop personal computers induces reactivity, the authors compared smoking-related outcomes between smokers using EMA and those not using EMA during a quit attempt. The use of no-EMA control groups has been rare in reactivity investigations to date. The EMA protocol included event-contingent assessments (smoking episodes, urge episodes) and random assessments. Outcomes included biologically confirmed abstinence and self-report measures of withdrawal, self-efficacy, motivation, affect, and temptations. Participants were smokers motivated to quit (N = 96). They were randomized to 1 of 3 groups: EMA for the week preceding a planned quit date, EMA for the week following the quit date, and no EMA. Abstinence rates did not differ between the groups at Day 7 or at Day 28 postcessation. For the 20 subscales assessed at each of 3 assessment times, there were significant differences between participants with and without EMA experience for 3 subscales at the 1st of 3 assessment times, and significant differences for 3 different subscales at the 3rd assessment time. These differences suggest some reactivity to EMA, although the inconsistent pattern across time indicates that further research is needed to definitively conclude that EMA induces reactivity. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Convergence properties of solitary tract neurons responsive to cardiac receptor stimulation in the anesthetized cat

The convergence pattern of cardiac receptors, pulmonary C-fibers, carotid chemoreceptor, and baroreceptor afferents onto neurons within the nucleus of the solitary tract (NTS) was studied in the anesthetized (pentobarbitone sodium, 40 mg/kg,) paralyzed and artificially ventilated cat. Extra- and intracellular recordings were made from NTS neurons while stimulating both cardiac receptors by aortic root injections of veratridine (1-3 micrograms/kg) and pulmonary C-fibers by a right atrial injection of phenylbiguanide (10-20 micrograms/kg). The ipsilateral carotid body was stimulated by using arterial injection of CO2-saturated bicarbonate solution, whereas inflation of the ipsilateral carotid sinus was used to activate baroreceptors. The ipsilateral cardiac vagal branch, cervical vagus, and carotid sinus nerves were stimulated electrically (1 Hz, 0.2-1 ms, 1-35 V). In 78 NTS neurons recorded either extracellularly (n = 47) or intracellularly (n = 31), electrical stimulation of the cardiac branch of the vagus nerve evoked synaptic potentials (spikes and/or excitatory postsynaptic potentials) with an onset latency between 4 and 220 ms. Some neurons displayed both short and long latency inputs(15.5 +/- 1.8 and 160.0 +/- 8.5 ms; n = 14). Of these 78 neurons, 24 responded to veratridine stimulation of cardiac receptors (i.e., cardioreceptive neurons) by exhibiting an augmenting-decrementing discharge of 37 +/- 4 s in duration with a peak frequency of 30 +/- 5 Hz. Convergence from other cardiorespiratory receptors was noted involving either carotid chemoreceptors (n = 7) or pulmonary C-fibers (n = 4) or from both carotid chemoreceptors and pulmonary C-fibers (n = 6). In contrast, only one cardioreceptive NTS neuron was activated by distension of the carotid sinus. Recording sites recovered were confined to the medial NTS at the level of the area postrema and extended caudally into the commissural subnucleus. Our results indicate a convergence of carotid chemoreceptor and pulmonary C-fiber afferent inputs to cardioreceptive NTS neurons. With the paucity of baroreceptor inputs to these neurons it is suggested that sensory integration within the NTS may reflect regulatory versus defensive or protective reflex control.