Practical method for generation expansion planning based on dynamic programming

This paper presents an efficient method which provides the optimal generation mix and the optimal generation construction process. The approximation method in which the dynamic programming technique and gradient method are combined is applied to determine the optimal generation mix with hydropower generation technologies. The successive approximations dynamic programming (SADP) technique, which is very suitable for high-dimensional multistage decision process problems, is used for obtaining the optimal generation construction process. The effectiveness and feasibility of the developed technique are demonstrated on a practical power system model which has five types of generation technologies including a hydropower generation technology.     

Effects of nondensifying inclusions on the densification and microstructure of zinc oxide matrix composites

The densification and microstructure development of ZnO containing Zn₇Sb₂O₁₂, ZrO₂, and aggregated ZnO were investigated to elucidate the effect of nondensifying inclusions on the sintering of ceramic/ceramic composites. The inclusion retarded the densification, and the degree of retardation was found to depend on the chemical species of inclusion; Zn₇Sb₂O₁₂ had the largest effect, followed by ZrO₂ and then aggregated ZnO last. The experimental results for aggregated ZnO was explained by the theory which predicts the generation of backstresses. The backstresses give a less significant effect on the densification. For Zn₇Sb₂O₁₂ and ZrO₂, the microstructure of the matrix varied with distance from an inclusion particle; much porosity was observed in the region surrounding the inclusion. Circumferential voids, which are responsible for the suppression of densification, form during the initial stage of sintering. Inclusion particles generate an anchoring effect which retards the densification of the matrix immediately surrounding the inclusion particle during the intermediate stage.Supported by the Inamori Foundation.     

Finite element analysis of the transient motion of stratified viscous fluids under gravity

The present paper deals with the finite element analysis of two-dimensional two-layer density flows in a gravitational field. A fluid in each layer is replaced with a large number of discrete particles, and the motion and deformation of each layer is represented by moving those particles in a Lagrangian manner. The velocity distribution in the whole fluid region is given as the finite element solution of the Navier-Stokes equations and the equation of continuity. In the finite element calculation, free-slip conditions are used on solid wall boundaries because no-slip conditions may cause sticking of some particles to walls. Then, a new technique for the implementation of free-slip conditions on arbitrary curved boundaries is presented. As numerical examples, density flows in a rectangular closed container and Rayleigh-Taylor instability in the container with a circular cross-section have been computed.     

Wood adhesives based on tannin extracts from barks of some pine and spruce species

Barks available in commercial quantities in Australia and overseas have been examined for their efficacy as raw materials for conversion to high quality adhesives for reconstituted wood products. Previously bark from maturePinus radiata was found to be suitable. This paper examines the suitability of barks from four mature pine species (Pinus caribaea, Pinus elliottii, Pinus pinaster andPinus sylvestris), one young pine species (Pinus radiata) and one spruce species (Picea abies). Only the bark extracts ofPinus caribaea andPinus pinaster gave high quality (Type A bond, WBP) wood adhesives. The gluing properties of the adhesives derived from the extracts appeared to be dependent on their contents of formaldehyde-reactive polyflavanoids as indicated by their Stiasny values, with a value of 65% being the minimum for producing a high quality adhesive by the methods used.     

Gel chromism and anomalous luminescence in poly(3-alkylthiophene)

The absorption spectrum of poly(3-alkylthiophene) gel changes drastically in association with a volume instability upon changing the solvent composition and also the temperature. In the expanded state in chloroform and at high temperature, the photoluminescence is much enhanced compared with the shrunken state in ethanol and at low temperature. This gel chromism and anomalous luminescence are discussed in terms of the change of effective conjugation length induced by the steric hindrance and the dynamics of the photoexcited species.     

Interconnected power systems with superconducting magnetic energy storage

The objective of this work is to discuss the concept of back‐to‐back interconnection systems with energy storage, especially with a Superconducting Magnetic Energy Storage (SMES) incorporated into a back‐to‐back DC link. In this case, each converter of the back‐to‐back system is used as a power conditioning system for the SMES coils. Since the AC–DC converter can be designed independently of the frequency of the power system, a two‐way switch is connected to the AC side of each converter. This two‐way switch can select the interconnected power systems. By using the two‐way switches, this system can provide the stored energy in the SMES system to each interconnected power system through two AC–DC converters. For instance, lower‐cost power of each power network can be stored through two converters during the off‐peak hours and made available for dispatch to each power network during periods of demand peak. Then this system increases the reliability of electric power networks and enables the economical operations depending on the power demand. This paper describes the unique operations of the back‐to‐back interconnection with SMES and discuses the optimal SMES configuration for a 300‐MW‐class back‐to‐back interconnection. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(2): 37–43, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20482     

Mechanical stretch induces hypertrophic responses in cardiac myocytes of angiotensin II type 1a receptor knockout mice

Many lines of evidence have suggested that angiotensin II (AngII) plays an important role in the development of cardiac hypertrophy through AngII type 1 receptor (AT1). To determine whether AngII is indispensable for the development of mechanical stress-induced cardiac hypertrophy, we examined the activity of mitogen-activated protein kinase (MAPK) family and the expression of the c-fos gene as hypertrophic responses after stretching cultured cardiac myocytes of AT1a knockout (KO) mice. When cardiac myocytes were stretched by 20% for 10 min, extracellular signal-regulated protein kinases (ERKs) were strongly activated in KO cardiomyocytes as well as wild type (WT) myocytes. Both basal and stimulated levels of ERKs were higher in cardiomyocytes of KO mice than in those of WT mice. Activation of another member of the MAPK family, p38(MAPK), and expression of the c-fos gene were also induced by stretching cardiac myocytes of both types of mice. An AT1 antagonist attenuated stretch-induced activation of ERKs in WT cardiomyocytes but not in KO cardiomyocytes. Down-regulation of protein kinase C inhibited stretch-induced ERK activation in WT cardiomyocytes, whereas a broad spectrum tyrosine kinase inhibitor (genistein) and selective inhibitors of epidermal growth factor receptor (tyrphostin, AG1478, and B42) suppressed stretch-induced activation of ERKs in KO cardiac myocytes. Epidermal growth factor receptor was phosphorylated at tyrosine residues by stretching cardiac myocytes of KO mice. These results suggest that mechanical stretch could evoke hypertrophic responses in cardiac myocytes that lack the AT1 signaling pathway possibly through tyrosine kinase activation.     

A novel interferon regulatory factor family transcription factor, ICSAT/Pip/LSIRF, that negatively regulates the activity of interferon-regulated genes

We have isolated a novel cDNA clone encoding interferon (IFN) consensus sequence-binding protein in adult T-cell leukemia cell line or activated T cells (ICSAT); this protein is the human homolog of the recently cloned Pip/LSIRF. ICSAT is structurally most closely related to the previously cloned ICSBP, a member of the IFN regulatory factor (IRF) family of proteins that binds to interferon consensus sequences (ICSs) found in many promoters of the IFN-regulated genes. Among T-cell lines investigated, ICSAT was abundantly expressed in human T-cell leukemia virus type 1 (HTLV-1)-infected T cells. When the HTLV-1 tax gene was expressed or phorbol myristake acetate-A23187 stimulation was used, ICSAT expression was induced in Jurkat cells which otherwise do not express ICSAT. When the binding of ICSAT to four different ICSs was tested, the relative differences in binding affinities for those ICSs were determined. To study the functional role of ICSAT, we performed cotransfection experiments with the human embryonal carcinoma cell line N-Tera2. ICSAT was demonstrated to possess repressive function over the gene activation induced by IFN stimulation or by IRF-1 cotransfection. Such repressive function is similar to that seen in IRF-2 or ICSBP. However, we have found that ICSAT has a different repressive effect from that of IRF-2 or ICSBP in some IFN-responsive reporter constructs. These results suggest that a novel mechanism of gene regulation by "differential repression" is used by multiple members of repressor proteins with different repressive effects on the IFN-responsive genes.     

Mapping evapotranspiration using MODIS and MM5 Four-Dimensional Data Assimilation

Evapotranspiration (ET), the sum of evaporation from soil and transpiration from vegetation, is of vital importance in the hydrologic cycle and must be taken into consideration in assessments of the water resources of any region. The MODerate resolution Imaging Spectroradiometer (MODIS) sensor offers a promising opportunity for estimating daily ET with a 1 km spatial resolution, but is hampered by frequent cloud contamination or data gaps from other factors. In this study, 1) a stand-alone ET model was applied and tested during clear or partial cloudy sky conditions using MODIS-based inputs of land surface and atmospheric data and 2) meteorological simulations by using Four-Dimensional Data Assimilation (FDDA) system between MODIS and the 5th Generation Meso-scale Meteorological Model (MM5) was used in cloudy conditions to facilitate continuous daily ET estimates. The MODIS ET algorithm modified from Mu et al. (2007) is based on the Penman-Monteith equation and was applied to predict ET at flux measurement sites. This algorithm considers both the effects of surface energy partitioning processes and environmental constraints on ET. We devised gap-filling approaches for MODIS aerosol and albedo data that were identified as bottlenecks to determine retrieval rates of insolation and ET. MODIS-derived input variables (i.e., meteorological variables and radiation components) for estimating ET showed a good agreement with flux tower observations at each site. The retrieval rate of MODIS ET doubled at four flux measurement sites after gap-filling with negligible compensation was undertaken for accuracy. In spite of the high accuracy of MODIS-derived input variables, MODIS ET showed meaningful errors at the four flux measurement sites. These errors were mainly associated with errors in the estimated canopy conductance. During clear sky conditions, MODIS was used to calculate ET, while the MODIS-MM5 FDDA system provided input variables for the calculation of ET under cloudy sky conditions. The performance of the MODIS-MM5 FDDA system was evaluated by comparing ET based on MODIS, which showed a good agreement with the MODIS ET for various land cover types. Our results indicate that MODIS can be applied to monitor the land surface energy budget and ET with reasonable accuracy and that MODIS-MM5 FDDA has the potential to provide reasonable input data of ET estimation under cloudy conditions.     

Physiology and Pathophysiology of Heparan Sulfate in Animal Models: Its Biosynthesis and Degradation

Heparan sulfate (HS) is a type of glycosaminoglycan that plays a key role in a variety of biological functions in neurology, skeletal development, immunology, and tumor metastasis. Biosynthesis of HS is initiated by a link of xylose to Ser residue of HS proteoglycans, followed by the formation of a linker tetrasaccharide. Then, an extension reaction of HS disaccharide occurs through polymerization of many repetitive units consisting of iduronic acid and N-acetylglucosamine. Subsequently, several modification reactions take place to complete the maturation of HS. The sulfation positions of N-, 2-O-, 6-O-, and 3-O- are all mediated by specific enzymes that may have multiple isozymes. C5-epimerization is facilitated by the epimerase enzyme that converts glucuronic acid to iduronic acid. Once these enzymatic reactions have been completed, the desulfation reaction further modifies HS. Apart from HS biosynthesis, the degradation of HS is largely mediated by the lysosome, an intracellular organelle with acidic pH. Mucopolysaccharidosis is a genetic disorder characterized by an accumulation of glycosaminoglycans in the body associated with neuronal, skeletal, and visceral disorders. Genetically modified animal models have significantly contributed to the understanding of the in vivo role of these enzymes. Their role and potential link to diseases are also discussed.