Recovery of fluorocarbons in Japan as a measure for abating global warming

The objective of this study is to evaluate the potential for recovering fluorocarbons as measures for the abatement of global warming. In this study, we focused on the three different kinds of fluorocarbons: CFCs, HCFCs and HFCs, and targeted refrigerant use because of the availability of relevant data. We first estimated future fluorocarbon emissions from the targeted appliances; we next compared those emissions in the units of CO₂ equivalent to the level of CO₂ emissions in 1990 from a quantitative point of view. As the result of this study, it was found that fluorocarbon emissions in 1999 and 2010 would be equal to approximately 7 and 3% of the level of CO₂ emissions in 1990 respectively. Moreover, if we implement a 100% recovery rate in every recovery route, we can reduce a large amount of emissions which correspond to approximately 2–5% of the level of CO₂ emissions in 1990, even if we take into account the energy-related CO₂ emissions by the transportation and decomposition of fluorocarbons.     

High-power CW-DFB laser diode modules for CATV applications operating at 1550 nm

Investigation of the correlation between longitudinal photon density distribution and spectral linewidth re-broadening, in conjunction with carefully designed coupling optics, enable laser modules that simultaneously achieve very high fibre-coupled power of 175 mW and very narrow linewidth<1 MHz even at /spl sim/120 mW of output power to be successfully fabricated.     

A Novel UWB Pulse Shape Modulation System

In this paper novel modified Hermite polynomial functions for use in impulse radio (ultra-wideband) communications are proposed. With these functions pulse shapes which are orthogonal and have nearly constant pulse width regardless of the pulse order are generated. These properties hold under the effects of differentiation. An M-ary communication system is constructed using these pulse shapes. A Matlab model for generating the pulses is designed and the effect of timing jitter on the performance of the system is investigated by computer simulation.     

A high resolution negative working resist,LMR-UV,for g- and i-line lithography

LMR-UV (“low molecular weight resist for uv lithography”), a naphthoquinone-diazide sulfonic acid ester of a novolak resin, is a negative working resist. The mechanism of insolubilization of LMR-UV is based on the facts that the naphthoquinone-diazide moiety is decomposed to indenecarboxylic acid (polar compound) by photolysis upon UV irradiation and that the irradiated resist film insolubilizes in a non-polar developer. LMR-UV reliably forms 0.6 μm lines and spaces over a reflective substrate with steps by using a g-line stepper having a 0.35 NA lens. 0.6 μm-wide aluminum patterns over topography are obtained by use of g-line exposure and reactive ion etching. By use of an i-line aligner (NA = 0.42), LMR-UV resolves 0.25 μm space patterns with overhang profiles. The profiles are due to the large absorption coefficient of 3.8 μm^?1. 0.3 μm wide aluminum patterns are formed by i-line exposure and lift-off metallization.     

Preparation and characterization of porous and electrically conducting carbon-clay composites

Porous and electrically conducting carbon-clay composites were prepared by firing mixtures of carbon powder (0 to 20 wt%) and clay minerals. They showed porosity of 50 to 65% and had high mechanical strength (compressive strength = 130 to 400 kg cm^–2) as well as high resistance against thermal oxidation in air. Their electrical conductivity, , increased with increasing carbon content levelling off at about 20 wt% of carbon content to give a value of about 2 S cm^–1. Formation of carbon chains is considered to be responsible for the electrical conduction in the composite, and a model to correlate the electrical conductivity with the carbon content has been proposed by modifying a model previously proposed by Scarisbrick.     

Polymerization of macromers

Summary The possibility of group transfer polymerization of methyl methacrylate-terminated polystyrene macromer (MA-PSt) was explored by using 1-methoxy-1-(trimethylsiloxy)-2-methyl-1-propene and tris(dimethylamino)sulfonium difluorotrimethylsilicate as initiator and catalyst, respectively. The results obtained at the polymerization temperature of 0°C were undesirable. However, the oligomerization at -78°C gave almost quantitatively oligo(MA-PSt) of which the degree of polymerization was in good agreement with the mole ratio of macromer to initiator. The GPC curve of oligo(MA-PSt) was sharp and symmetrical. In addition, it was shown by the copolymerization with methyl methacrylate that the polymerizability of the macromer was markedly enhanced in the presence of methyl methacrylate comonomer.     

Preparation of soluble TiCl3 catalysts by reduction of TiCl4 with Grignard reagents and their use for copolymerization of ethylene with propylene

Summary Preparations of soluble TiCl₃ catalysts by reduction of TiCl₄ with some types of Grignard reagents were carried out in halogenated hydrocarbon solvents by using appropriate ethers as donor. The soluble TiCl₃·MgX₂·ether complex catalysts and triisobutylaluminum as co-catalyst showed high activities for the copolymerization of ethylene with propylene. It was first found that the soluble TiCl₃·MgX₂·ether complex catalysts enhance the activities for the copolymerizations in the same manner as solid titanium catalysts supported on MgCl₂ which show high activities for homopolymerizations of olefin monomers. The copolymers obtained possessed low crystallinities. Also, the copolymers seem to contain microblock sequences and have outstandingly high tensile strength and elongation at break compared to copolymers by the conventional VOCl₃/Al(Et)_1.5Cl_1.5 catalyst system.     

Preparation of Aluminum Nitride–Silicon Carbide Nanocomposite Powder by the Nitridation of Aluminum Silicon Carbide

Aluminum nitride (AlN)–silicon carbide (SiC) nanocomposite powders were prepared by the nitridation of aluminum-silicon carbide (Al₄SiC₄) with the specific surface area of 15.5 m²·g⁻¹. The powders nitrided at and above 1400°C for 3 h contained the 2H-phases which consisted of AlN-rich and SiC-rich phases. The formation of homogeneous solid solution proceeded with increasing nitridation temperature from 1400° up to 1500°C. The specific surface area of the AlN–SiC powder nitrided at 1500°C for 3 h was 19.5 m²·g⁻¹, whereas the primary particle size (assuming spherical particles) was estimated to be ∼100 nm.     

500-fps face tracking system

In this paper, we propose a high-speed vision system that can be applied to real-time face tracking at 500 fps using GPU acceleration of a boosting-based face tracking algorithm. By assuming a small image displacement between frames, which is a property of high-frame rate vision, we develop an improved boosting-based face tracking algorithm for fast face tracking by enhancing the Viola–Jones face detector. In the improved algorithm, face detection can be efficiently accelerated by reducing the number of window searches for Haar-like features, and the tracked face pattern can be localized pixel-wise even when the window is sparsely scanned for a larger face pattern by introducing skin color extraction in the boosting-based face detector. The improved boosting-based face tracking algorithm is implemented on a GPU-based high-speed vision platform, and face tracking can be executed in real time at 500 fps for an 8-bit color image of 512 × 512 pixels. In order to verify the effectiveness of the developed face tracking system, we install it on a two-axis mechanical active vision system and perform several experiments for tracking face patterns.