Study of the copper leaching in the wet oxidation of phenol with CuO-based catalysts: Causes and effects

Catalytic wet oxidation of phenol as a model pollutant has been performed in a three phase fixed-bed reactor (FBR) by using a commercial catalyst based on copper oxide in order to analyze the variables affecting significantly the copper leaching. It has been found that temperature has an almost negligible influence in the range studied (70–160 °C). On the contrary, an important effect of the pH value was noticed. The copper leaching reduces when the pH of the solution fed to the reactor increases, being almost negligible at pH ≥ 5. Moreover, the composition of the reaction media also influences the leaching. Higher copper concentrations than those expected by the effect of the acid aqueous media have been measured in the reactor effluent when phenol, catechol, hydroquinone, p-benzoquinone and maleic acid are present in the reaction media. On the contrary, oxalic acid has a negative influence on the leaching, since it captures the copper in solution to form copper oxalate which precipitates on the catalyst surface. For a previously acidified medium, the acetic and formic acids do not have any other effect on the copper leaching. It has been also demonstrated that as copper in solution decreases, so does phenol conversion, because the homogeneous catalysis contributes significantly to the oxidation reactions even in fixed-bed reactors.     

Influence of partial replacement of NaCl with KCl on lipid fraction of dry fermented sausages inoculated with a mixture of Lactobacillus plantarum and Staphylococcus carnosus

The effect of partial replacement of NaCl (3% NaCl) with KCl (1.5% NaCl and 1% KCl) on the lipid fraction of dry fermented sausages inoculated with Lactobacillus plantarum and Staphylococcus carnosus as starter culture was analysed. The reduction in salt concentration did not affect the Micrococcaceae count. A positive effect on the intensity of lipolytic activity was observed as a consequence of the decrease in salt level. There was no decrease in the oxidative processes. The higher amounts of volatile fatty acids found suggest that the tested modification enhances some of their mechanisms of synthesis.     

Acute acid-base disorders. 2. Specific disturbances

Evaluation of the acid-base status of the body requires measurement of bicarbonate (total carbon dioxide) concentration, pH, and partial pressure of CO2 in arterial blood. Calculation of standard bicarbonate and base excess or deficit is not necessary. The normal concentration of free hydrogen ions (H+) is approximately 40 millimoles/liter, which is equivalent to a pH of 7.4. The normal load of fixed acids is 50 to 80 millimoles in 24 hours. A steady state is maintained by excretion of an equal amount of H+ by the kidneys, which at the same time regenerate bicarbonate to replenish buffer stores. Renal excretion of H+ is in the form of titratable acid and ammonium. Synthesis of ammonia can increase severalfold under the stimulus of acidosis. This is the chief mechanism of long-term compensation. Metabolic acidosis can be due to an excessive acid load (endogenous or exogenous), impaired renal excretion of H+, or bicarbonate loss. Determination of the "anion gap" (unmeasured anions) helps to establish the mechanism of acidosis. Acidosis with a normal anion gap is due to either bicarbonate loss or ingestion of certain chloride salts. A gap larger than normal indicates the presence in the body of acids other than acidfying chloride salts. Management of metabolic acidosis requires accurate diagnosis, clear understanding of the mechansim, and individualized treatment. Metabloic alkalosis is due to loss of H+ (usually from stomach or kidneys) or ingestion of alkali. Measurement of urinary chloride helps establish the mechanism of alkalosis. In saline-responsive alkalosis, the urinary chloride level is very low. This is usually due to gastric loss of H+, and the condition responds to administration of saline solution. When the urinary chloride level is only moderately low, the alkalosis is probably not due to gastric loss of H+. This form of alkalosis (saline-resistant) does not respond well to administration of saline solution and requires use of potassium in treatment. Apprpriate compensatory responses to acidosis or alkalosis are critical to survival. Compensation for metabloic acidosis consists of hyperventilation and enhanced renal excretion of H+, chiefly as ammonium. In metabolic alkalosis, compensation is mainly renal excretion of bicarbonate. Respiratory acidosis is due to alveolar hypoventilation. In chronic situations, a compensatory rise in serum bicarbonate concentration is expected. Management consists of treatment of the cause of hypoventilation. Respiratory alkalosis is due to hyperventilation. Treatment requires identification and correction of the cause of hyperventilation.     

Green–Naghdi type III viscous fluids

We investigate constitutive theory for a new type of thermoviscous fluid. Equations are derived which reduce to the classical heat conduction equation under Fourier’s law when the new parameters tend to zero. Basic solutions for parallel flows are found and a travelling wave analysis is presented.     

Role of Tyrosine Kinase Syk in Thrombus Stabilisation at High Shear

Understanding the pathways involved in the formation and stability of the core and shell regions of a platelet-rich arterial thrombus may result in new ways to treat arterial thrombosis. The distinguishing feature between these two regions is the absence of fibrin in the shell which indicates that in vitro flow-based assays over thrombogenic surfaces, in the absence of coagulation, can be used to resemble this region. In this study, we have investigated the contribution of Syk tyrosine kinase in the stability of platelet aggregates (or thrombi) formed on collagen or atherosclerotic plaque homogenate at arterial shear (1000 s⁻¹). We show that post-perfusion of the Syk inhibitor PRT-060318 over preformed thrombi on both surfaces enhances thrombus breakdown and platelet detachment. The resulting loss of thrombus stability led to a reduction in thrombus contractile score which could be detected as early as 3 min after perfusion of the Syk inhibitor. A similar loss of thrombus stability was observed with ticagrelor and indomethacin, inhibitors of platelet adenosine diphosphate (ADP) receptor and thromboxane A₂ (TxA₂), respectively, and in the presence of the Src inhibitor, dasatinib. In contrast, the Btk inhibitor, ibrutinib, causes only a minor decrease in thrombus contractile score. Weak thrombus breakdown is also seen with the blocking GPVI nanobody, Nb21, which indicates, at best, a minor contribution of collagen to the stability of the platelet aggregate. These results show that Syk regulates thrombus stability in the absence of fibrin in human platelets under flow and provide evidence that this involves pathways additional to activation of GPVI by collagen.     

ON A THEORY OF INTERACTING CONTINUA WITH MEMORY

A linear theory is developed for thermoviscoelastic composites modeled as interpenetrating solid continua with memory. The response functionals are considered to depend on the past history of displacement fields, displacement gradients, temperature field, and temperature gradient. A uniqueness result and a variational characterization of solutions in the context of the dynamical theory are also established.     

Field improvement in a uniaxial centered lens composed of two stacked-volume holographic elements

Arrangements are described for the recording of volume holograms with two sections that, when stacked together, work as uniaxial centered lenses and allow one to solve the problem of angular selectivity in the imaging of wide objects. The performance of such systems is examined qualitatively, and suggestions aimed at improving these designs are proposed.     

A 32-mW 320-MHz continuous-time complex delta-sigma ADC for multi-mode wireless-LAN receivers

We present an experimental continuous-time complex delta-sigma multi-bit modulator, implemented in standard 0.25-/spl mu/m CMOS technology and meeting all major requirements for application in IEEE 802.11a/b/g wireless LAN receivers. The clock frequency is 320 MHz, producing an oversampling ratio of 16 for 20 MHz channel bandwidths. The modulator supports two operation modes for zero-IF and low-IF receiver architectures respectively, requires a single 2.5-V power supply, and dissipates only 32 mW of power. The measured peak signal-to-noise ratio is 55 dB. Further experimental results using sine-wave and OFDM test signals are also presented.