In situ measurements of human cough aerosol hygroscopicity

The airborne dynamics of respiratory droplets, and the transmission routes of pathogens embedded within them, are governed primarily by the diameter of the particles. These particles are composed of the fluid which lines the respiratory tract, and is primarily mucins and salts, which will interact with the atmosphere and evaporate to reach an equilibrium diameter. Measuring organic volume fraction (OVF) of cough aerosol has proved challenging due to large variability and low material volume produced after coughing. Here, the diametric hygroscopic growth factors (GF) of the cough aerosol produced by healthy participants were measured in situ using a rotating aerosol suspension chamber and a humidification tandem differential mobility analyser. Using hygroscopicity models, it was estimated that the average OVF in the evaporated cough aerosol was 0.88 ± 0.07 and the average GF at 90% relative humidity (RH) was 1.31 ± 0.03. To reach equilibrium in dry air the droplets will reduce in diameter by a factor of approximately 2.8 with an evaporation factor of 0.36 ± 0.05. Hysteresis was observed in cough aerosol at RH = ∼35% and RH = ∼65% for efflorescence and deliquescence, respectively, and may depend on the OVF. The same behaviour and GF were observed in nebulized bovine bronchoalveolar lavage fluid.     

Mechanics of plain-woven fabrics for inflated structures

Pressurized fabric tubes, pressure-stabilized beams (known as air beams) and air-inflated structures are considered to be valuable technologies for lightweight, rapidly deployable structures. Design optimization of an inflated structure depends on a thorough understanding of woven fabric mechanics. In this paper the bending response of woven pressure-stabilized beams have been experimentally tested and analytically investigated. Additionally, the micromechanical effects of interacting tows have been studied through finite element models containing contact surfaces and nonlinear slip/stick conditions. Local unit cell models consisting of pairs of woven tows were created to characterize the effective constitutive relations. The material properties from the unit cell models were then used for the global continuum model subjected to 4-point flexure. An experimental set-up was designed and manufactured for testing of Vectran and PEN air beams. The air beam mid-span deflections were measured as functions of inflation pressure and bending load. Plots of the elastic and shear moduli with respect to the pressure and coefficient of friction have been generated. It was determined that the effective elastic and shear moduli were functions of inflation pressure, the material used and the geometry of the weave. It was shown that pneumatic or pressurized tube structures differ fundamentally from conventional metal structures.     

Analytical Modeling of Short-Channel Fully-Depleted Triple Work Function Metal Gate (TWFMG) SOI MESFET

Silicon - In this paper, a new structure: triple work function metal gate SOI MESFET, intended for integration into the deep-submicron CMOS technology, is proposed. The gate of the device consists...     

Experimental determination of gas holdup and volumetric mass transfer coefficient in a jet bubbling reactor

The hydrodynamics and mass transfer characteristics of a lab-scale jet bubbling reactor(JBR) including the gas holdup, volumetric mass transfer coefficient and specific interfacial area were assessed experimentally investigating the influence of temperature, p H and superficial gas velocity. The reactor diameter and height were 11 and 30 cm,respectively. It was equipped with a single sparger, operating at atmospheric pressure, 20 and 40℃, and two p H values of 3 and 6. The height of the liquid was 23 cm, while the superficial gas velocity changed within 0.010–0.040 m·s~(-1) range. Experiments were conducted with pure oxygen as the gas phase and saturated lime solution as the liquid phase. The liquid-side volumetric mass transfer coefficient was determined under unsteady-state oxygen absorption in a saturated lime solution. The gas holdup was calculated based on the liquid height change, while the specific interfacial area was obtained by a physical method based on the bubble size distribution(BSD) in different superficial gas velocities. The results indicated that at the same temperature but different p H, the gas holdup variation was negligible, while the liquid-side volumetric mass transfer coefficient at the p H value of 6 was higher than that at the p H = 3. At a constant p H but different temperatures, the gas holdup and the liquid-side volumetric mass transfer coefficients at 40℃ were higher than that of the same at 20℃. A reasonable and appropriate estimation of the liquid-side volumetric mass transfer coefficient(kla) in a pilot-scale JBR was provided which can be applied to the design and scale-up of JBRs.     

Effect of Extraordinary Large Floods on at-site Flood Frequency

The peak flow of extraordinary large floods that occur during a period of systematic record is a controversial problem for flood frequency analysis (FFA) using traditional methods. The present study suggests that such floods be treated as historic flood data even though their historical period is unknown. In this paper, the extraordinary large flood peak was first identified using statistical outlier tests and normal probability plots. FFA was then applied with and without the extraordinary large floods. In this step, two goodness-of-fit tests including mean absolute relative deviation and mean squared relative deviation were used to identify the best-fit probability distributions. Next, the generalized extreme value (GEV), three-parameter lognormal (LN3), log-Pearson type III (LP3), and Wakeby (WAK) probability distributions were used to incorporate and adjust the extraordinary large floods with other systematic data. Finally, procedures with and without historical adjustment were compared for the extraordinary large floods in terms of goodness-of-fit and flood return-period quantiles. The results of this comparison indicate that historical adjustment from an operational perspective was more viable than without adjustment procedure. Furthermore, the results without adjustment were unreasonable (subject to over- and under-estimation) and produced physically unrealistic estimates that were not compatible with the study area. The proposed approach substantially improved the probability estimation of rare floods for efficient design of hydraulic structures, risk analysis, and floodplain management.     

Hybrid Probabilistic Risk Assessment Using Fuzzy FTA and Fuzzy AHP in a Process Industry

Journal of Failure Analysis and Prevention - There are many available techniques which are widely used for failure probability analysis. Fault tree analysis (FTA) is a well-known method to identify...     

Biosynthesis of SeNPs by Mycobacterium bovis and their enhancing effect on the immune response against HBs antigens: an in vivo study

Conventional hepatitis B vaccine contains alum but is less effective to induce Th1 response. Selenium nanoparticles and Bacillus Calmette–Guerin were reported as immune modulators. In this study, SeNPs were extracted from Mycobacterium bovis and characterised. SeNPs were mixed with HBs‐Ag and administered to the mice to investigate he immune response pattern. With an addition of Se ions at a sub‐inhibitory concentration to the Sauton medium broth after 24 h, SeNPs were extracted from M. bovis and characterised by Fourier transform infrared spectroscopy, dynamic light scattering, atomic forcemicroscopy, energy dispersive X‐ray spectrum, transmission electron microscopy, and thermogravimetric analysis. Furthermore, female inbred BALB/c mice were injected subcutaneously on the first, 14th, 28th day with 100 and 200 µg doses of that SeNPs supplemented with HBs‐Ag vaccine. Later, the total antibody, isotypes of Immunoglobulin G1, Interlukin 4, and interferon‐γ were measured by enzye‐linked immunosorbent assay. The size of the SeNPs was <150 nm. Level of total antibody and immunoglobulin G2a increased significantly in the group that received 200 µg/ml nano selenium extracted from M. bovis. SeNPs in dose of 200 µg coated with organic materials of M. bovis could induce an influential immune response in relation to the conventional HBs‐Ag vaccine.Inspec keywords: selenium, nanoparticles, nanofabrication, microorganisms, Fourier transform spectra, infrared spectra, light scattering, atomic force microscopy, X‐ray chemical analysis, transmission electron microscopy, thermal analysis, nanomedicineOther keywords: biosynthesis, selenium nanoparticles, Mycobacterium bovis, enhnced immune response, HBs antigens, Bacillus Calmette‐Guerin, immune modulators, biogenic SeNPs, immune response pattern, Sauton medium broth, Fourier transform infrared spectroscopy, dynamic light scattering, atomic force microscopy, energy dispersive X‐ray spectrum, transmission electron microscopy, thermogravimetric analysis, female inbred BALB/c mice, antibody, IgG1 isotype, IgG2a isotype, IL₄ isotype, interferon‐γ, enzyme‐linked immunosorbent assay, bacterium, time 24 h, time 14 day, time 28 day, Se     

Multiple robust H∞ controller design using the nonsmooth optimization method

This paper proposes a systematic technique to design multiple robust H_∞ controllers. The proposed technique achieves a desired robust performance objective, which is impossible to achieve with a single robust controller, by dividing the uncertainty set into several subsets and by designing a robust controller to each subset. To achieve this goal with a small number of divisions of the uncertainty set, an optimization problem is formulated. Since the cost function of this optimization problem is not a smooth function, a numerical nonsmooth optimization algorithm is proposed to solve this problem. This method avoids the use of Lyapunov variables, and therefore it leads to a moderate size optimization problem. A numerical example shows that the proposed multiple robust control method can improve the closed‐loop performance when a single robust controller cannot achieve satisfactory performance. Copyright © 2009 John Wiley & Sons, Ltd.