Quasi-static compressive behaviour of aluminium cenosphere syntactic foams

In this paper, cenosphere particles embedded in AA2014 aluminium matrix are used to fabricate syntactic foam by stir casting method. The particle size is about 100?µm and foam density is about 1990?kg?m^?3. Compression tests at strain rate 0.001/s are performed on foam samples to characterise their mechanical properties which are then used in numerical analysis on commercial finite element analysis software ABAQUS/CAE with isotropic elastic-plastic material model. Experimental and numerical results show good conformity in deformation behaviour with elastic and plateau zones showing average deviations less than 5% and 20%, respectively. Foams showed high yield stress and energy absorption capabilities that can be useful in making blast and impact resistant structures.     

Metastatic renal cell carcinoma presenting as an aural polyp

Renal cell carcinoma may metastasize to the head and neck region at different stages of its evolution. We present a case of an undiagnosed renal cell carcinoma presenting as an ear polyp, and discuss the difficulties of the diagnosis and the management of these tumours.     

Predicting the performance of concrete structures exposed to chemically aggressive environment—Field validation

The behavior of two series of concrete slabs exposed to sulfate-bearing soils was investigated by a numerical model called STADIUM. In addition to the diffusion of ions and moisture, the model also accounts for the effects of dissolution/precipitation reactions on the transport mechanisms. The simulations yielded by the model were compared to the actual degradation of the slabs after 8 years of exposure. The microstructural alterations of concrete resulting from the penetration of magnesium, chloride and sulfate ions were studied by backscatter mode scanning electron microscope observations and energy-dispersive X-ray analyses. The comparison of both series of data indicates that the model can reliably predict the various features of the microstructural alterations of concrete.

---

Résumé Le comportement de deux séries de dalles sur sol en béton exposées à des sols chimiquement agressifs a été étudié à l'aide d'un code de calcul numérique appelé STADIUM. Ce modèle permet de décrire le transport couplé de l'eau et des ions dans des matériaux poreux non-saturés en prenant en considération l'influence des réactions chimiques. Les résultats des simultations de la dégradation du béton après huit ans d'exposition à des ions chlore, sulfate et magnésium. Les observations ont été réalisées par microscopie électronique à balayage. Des analyses par dispersion des rayons X ont également été effectuées. Les données démontrent clairement que le modèle perment de prédire avec précision le comportement du béton soumis à différents types d'agression chimique.

---

---

Editorial Note Laval University (Canada) is a RILEM Titular Member. Prof. J. Marchand was awarded the 2000 Robert L'Hermite Medal. He is Editor in Chief for Concrete Science and Engineering and Associate Editor for Materials and Structures. He participates in RILEM TC 186-ISA ‘Internal Sulfate attack’.     

Fuzzy Multiobjective and Linear Programming Based Management Models for Optimal Land-Water-Crop System Planning

In this article, linear programming and fuzzy optimization models are developed for planning and management of available land-water-crop system of Mahanadi-Kathajodi delta in eastern India. The models are used to optimize the economic return, production and labour utilization, and to search the related cropping patterns and intensities with specified land, water, fertilizer and labour availability, and water use pattern constraints. Due to extreme backwardness of the study area, it has been decided to keep all the three objectives of the linear programming models at the same priority level to obtain the compromised solution in a fuzzy environment that incorporates the imprecision in fuzzy goals and fuzzy constraints. These non-structural models facilitate the conjunctive use of available surface water and groundwater resources. A comparative evaluation along with the benefit-cost ratios of the existing and proposed farming systems is also presented.     

Ganglioside content of human platelets--differences in resting and activated platelets

Gangliosides may play functional roles in platelet physiology, therefore this study has been designed to evaluate whether changes in ganglioside composition may occur as a consequence of platelet activation. The results obtained indicate that lactosylceramide and GM3 are the major glycosphingolipids of human platelets. The lipid-bound sialic acid (LBSA) content was 1.27 +/- 0.04 micrograms/mg of protein. Resting platelets did not express GD3; GD3 was synthesized upon platelet activation (24 +/- 8 ng/mg of protein). The stimulation of platelets with adenosine diphosphate showed the appearance of GD3 even in the absence of degranulation. Finally, incorporation of pyrene-labeled GM3 into platelet membranes, followed by stimulation with adenosine diphosphate, resulted in the appearance of a fluorescent band comigrating with GD3. The present studies indicate that sialytransferase activation may occur as an early event following platelet stimulation, leading to GD3 synthesis mainly from the GM3 pool.     

Dependence on the motif YIPP for the physical association of Jak2 kinase with the intracellular carboxyl tail of the angiotensin II AT1 receptor

Angiotensin II is the effector molecule of the renin-angiotensin system. Virtually all of its biochemical actions are mediated through a single class of cell-surface receptors called AT1. These receptors contain the structural features of the seven-transmembrane, G-protein-coupled receptor superfamily. Angiotensin II, acting through the AT1 receptor, also stimulates the Jak/STAT pathway by inducing ligand-dependent Jak2 tyrosine phosphorylation and activation. Here, we show that a glutathione S-transferase fusion protein containing the carboxyl-terminal 54 amino acids of the rat AT1A receptor physically binds to Jak2 in an angiotensin II-dependent manner. Deletional analysis, using both in vitro protocols and cell transfection analysis, showed that this association is dependent on the AT1A receptor motif YIPP (amino acids 319-322). The wild-type AT1A receptor can induce Jak2 tyrosine phosphorylation. In contrast, an AT1A receptor lacking the YIPP motif is unable to induce ligand-dependent phosphorylation of Jak2. Competition experiments with synthetic peptides suggest that each of the YIPP amino acids, including tyrosine 319, is important in Jak2 binding to the AT1A receptor. The binding of the AT1A receptor to the intracellular tyrosine kinase Jak2 supports the concept that the seven-transmembrane superfamily of receptors can physically associate with enzymatically active intracellular proteins, creating a signaling complex mechanistically similar to that observed with growth factor and cytokine receptors.     

Leaching of zinc sulfide concentrate from the ganesh-himal deposit of nepal

The leaching of zinc concentrate obtained from the zinc ore located in the Ganesh-Himal region of Nepal has been carried out in the presence of ammonium persulfate (APS) as an oxidant. Leaching variables such as time, temperature, acid, and oxidant concentration, E _h , and particle size of sphalerite concentrate were studied to optimize the condition and to understand the mechanism of the reaction. The zinc extraction increased up to a temperature of 333 K and a further rise in the temperature to 343 K resulted in lowering of metal extraction. A decrease in particle size and increase in oxidant concentration enhanced the dissolution rate of zinc. The leaching data best fitted to the mixed controlled kinetic model. An activation energy of 43 kJ/mol was obtained for the dissolution of zinc in the temperature range 303 to 333 K with APS. The leaching mechanism was further established by characterizing the original concentrate and the leach residue by X-ray diffraction (XRD) phase identification and scanning electron microscopy (SEM) studies.     

Estimating eye care workforce supply and requirements

PURPOSE: To estimate the workforce supply and requirements for eye care in the United States. METHODS: Three models were constructed for analysis: supply of providers, public health need for eye care, and demand (utilization) for eye care. Ophthalmologists, other physicians, and optometrists were included in the models. Public health need was determined by applying condition-specific prevalence and incidence rates from population-based and other epidemiologic studies. Demand was determined by use of national databases, such as the National Ambulatory Care Survey, National Hospital Discharge Survey, and Medicare Part B. Time requirements for care were obtained through a stratified sample survey of the membership of the American Academy of Ophthalmology. RESULTS: Under modeling assumptions that use a work-time ratio of one between optometrists and ophthalmologists and between specialist and generalist ophthalmologists, a significant excess of eye care providers exists relative to both public health need and demand. Changes in the work-time ratio, work-hours per year per provider, care patterns for the same condition, or other factors could significantly reduce or eliminate the surplus relative to need. CONCLUSION: If optometrists are the preferred primary eye care provider, ophthalmologists would be in excess under all demand scenarios and all need scenarios where the optometrist to ophthalmologist work-time ratio is greater than 0.6. No excess of ophthalmologists would exist if ophthalmologists are the preferred primary eye care provider. Data on the appropriate work time ratio will help refine estimates of the imbalance between supply and requirements.