Fabrication of blue-light emission fused-silica substrates by using Si-ion implantation and high-temperature annealing

We fabricated fused-silica substrates which emit blue light by using Si-ion implantation and high-temperature annealing. Photoluminescence peak wavelengths are around 400 nm, and the peak intensities can be remarkable after annealing above 1150 °C.     

Strain-induced ordering of microdomain structures in polystyrene-block-polybutadiene-block-polystyrene triblock copolymers cross-linked in the disordered state

Strain-induced ordering of microdomain structures in cross-linked polystyrene-block-polybutadiene-block-polystyrene (SBS) triblock copolymers was examined by the small-angle X-ray scattering technique. To stretch the SBS samples at elevated temperature above the glass transition temperature of polystyrene, polybutadiene blocks were chemically cross-linked in the disordered state. The initial morphology was disorder-like or bicontinuous due to incompletion of microphase separation in the presence of the chemical cross-links. When the cross-linked SBS samples were mechanically stretched at 130 °C and were further annealed for 24 h under a stretched state, the random domain structures ordered gradually and lamellar-like regularity was finally attained. It was found that the ordering proceeded more for the case of the higher strain.     

Template‐Free Fabrication of Mesoporous Alumina Nanospheres Using Post‐Synthesis Water‐Ethanol Treatment of Monodispersed Aluminium Glycerate Nanospheres for Molybdenum Adsorption

This work reports the template‐free fabrication of mesoporous Al₂O₃ nanospheres with greatly enhanced textural characteristics through a newly developed post‐synthesis “water‐ethanol” treatment of aluminium glycerate nanospheres followed by high temperature calcination. The proposed “water‐ethanol” treatment is highly advantageous as the resulting mesoporous Al₂O₃ nanospheres exhibit 2–4 times higher surface area (up to 251 m² g^?1), narrower pore size distribution, and significantly lower crystallization temperature than those obtained without any post‐synthesis treatment. To demonstrate the generality of the proposed strategy, a nearly identical post‐synthesis “water treatment” method is successfully used to prepare mesoporous monometallic (e.g., manganese oxide (MnO₂)) and bimetallic oxide (e.g., CuCo₂O₄ and MnCo₂O₄) nanospheres assembled of nanosheets or nanoplates with highly enhanced textural characteristics from the corresponding monometallic and bimetallic glycerate nanospheres, respectively. When evaluated as molybdenum (Mo) adsorbents for potential use in molybdenum‐99/technetium‐99m (⁹⁹Mo/^99mTc) generators, the treated mesoporous Al₂O₃ nanospheres display higher molybdenum adsorption performance than non‐treated Al₂O₃ nanospheres and commercial Al₂O₃, thereby suggesting the effectiveness of the proposed strategy for improving the functional performance of oxide materials. It is expected that the proposed method can be utilized to prepare other mesoporous metal oxides with enhanced textural characteristics and functional performance.     

High-intensity multi-bunch beam generation by a photo-cathode RF gun

A multi-bunch photo-cathode RF gun system has been developed as an electron source for the production of intense quasi-monochromatic X-rays based on inverse Compton scattering. The desired multi-bunch beam is 100 bunches/pulse with a total charge of 500 nC and a bunch spacing of 2.8 ns. We modified the gun cavity of a ‘BNL-type IV’ RF gun to allow a CsTe cathode plug in the end plate. The system uses a four-dipole chicane beam line to allow the injection of laser light normal to the cathode surface. We compensate the gun cavity beam loading caused by the high-intensity multi-bunch electron beam by injecting the laser pulse before RF power has filled the cavity. We have achieved a total intensity of 220 nC in 100 bunches with a bunch-to-bunch energy spread under 1.3% (peak-to-peak). This paper concentrates on experiments to generate the high-intensity multi-bunch beam with compensation of the bunch-to-bunch energy spread due to heavy beam loading.     

Reinitiation of spermatogonial mitotic differentiation in inactive old BDF1 mouse seminiferous tubules transplanted to W/Wv mouse testis

The seminiferous epithelia of old mice (33 mo of age) are composed of spermatogonia and Sertoli cells. Histochemical examination using the anti-c-kit monoclonal antibody demonstrated that the number of differentiating type A spermatogonia decreases with age. To elucidate the differential activity of old mouse spermatogonia, we transplanted extremely thin seminiferous epithelia of old BDF, mice into W/Wv mouse testes and examined whether or not they could reinitiate differentiation. Artificially cryptorchid mice were used as the control. At 2 wk after transplantation, spermatocytes and round spermatids were detected in transplanted seminiferous tubules of the control, whereas the most advanced spermatogenic cells in those of old mice were spermatocytes. At 4 wk after transplantation, although elongated spermatids were detected in transplanted tubules of the control, haploid cells (spermatids) were still undetectable in those derived from old mice. Thus, meiosis was never restored, although spermatogonia of old mice can reinitiate differentiation into spermatocytes under suitable testicular conditions. Since it has been reported in several mammalian species that age-related changes in the testicular microenvironment lead to the gerontal cessation of spermatogenesis, the present results suggest that both a defective extratubular environment and a defective intratubular environment may cause the cessation of spermatogenesis in old BDF, mice.     

Optical Burst Switching Router With 40-,10-Gb/s Bit-Rate Transparent Contention Resolution

We report a bit-rate transparent optical burst switching (OBS) router prototype using a fast 5 times 5 PLZT [(Pb,La)(Zr,Ti)O₃ ] optical matrix switch. Dynamic switching in a two-wavelength, 2 times 2 OBS switch is demonstrated. Contention resolution using a tunable Mach-Zehnder interferometer wavelength converter for both 40- and 10-Gb/s bursts is demonstrated for the first time. Error-free operation was achieved for both bit rates under the same settings, as required in autonomous networks     

Decomposition and regeneration of methane in the absence and the presence of a hydrogen-absorbing alloy CaNi5

Suitable catalysts for the decomposition of methane into carbon and hydrogen and for the regeneration of methane by hydrogenation of the carbon have been looked for in a series of transition metals and precious metals supported on various carriers. The most active catalyst for both reactions was Ni/SiO₂. The carbon formed on this catalyst was thermodynamically less stable than graphite. The different rate equations for the decomposition of methane obtained for the fresh and carbon deposited Ni/SiO₂ suggest that the rate-determining steps are different for the two catalysts. The highest number of carbon atoms deposited per one Ni atom was 31 at 773 K. However, the number of methane molecules recovered easily at 773 K was limited to 1.5 per Ni atom.

A physical mixture of Ni/SiO₂ and CaNi₅, a hydrogen-absorbing alloy, enhanced the decomposition rate of methane, enabling the complete conversion of methane at 773 K beyond the thermodynamic limitation. The presence of CaNi₅ at 273 K separated from the catalyst in a reaction system further enhanced the decomposition of methane due to an increased hydrogen-absorbing capacity of the CaNi₅ at low temperatures. The carbon deposited on Ni/SiO₂ in this case was reactive to be hydrogenated back to methane at 773 K, giving an average 7.5 CH₄ molecules per one Ni atom.     

Molybdenum‐Catalyzed Stereospecific Deoxygenation of Epoxides to Alkenes

Mild and simple catalytic systems consisting of molybdenum(VI) dichloride dioxide [MoO₂Cl₂] as a catalyst and a phosphine as reductant have been developed for the stereospecific deoxygenation of epoxides to alkenes. The reactions using 1,2‐bis(diphenylphosphino)ethane (dppe) and triphenylphosphine (PPh₃) proceed with retention and inversion of stereochemistry, respectively. The mild reaction tolerates the presence of various functional groups and affords stereodefined substituted olefins in good yields.