Influence of Source Stack and Heterogeneous Gate Dielectric on Band to Band Tunneling Rate of Tunnel FET

In this paper, the presence of source stack and heterogeneous gate dielectric material in the structure of an n-channel tunnel FET (TFET) is investigated.     

Parametric Wavelength Conversion From Conventional Near-Infrared to Visible Band

The feasibility of distant wavelength conversion in photonic crystal fiber was explored. The one-pump parametric architecture was used to demonstrate translation from the conventional (1550 nm) to visible (500 nm) band. Experimental results are reported, which demonstrate the conventional-to-visible conversion of single- and multiple-channel signals encoded in the nonreturn-to-zero format     

A 60‐GHz on‐chip slot‐array antenna in integrated‐passive‐device technology for antenna‐in‐package applications

A new millimeter‐wave antenna structure on a low‐cost, production platform integrated passive device technology is presented. The antenna consists of a 2‐by‐1 array of slot antennas at 60 GHz. An in‐house developed on‐chip antenna measurement setup was used to characterize the fabricated antenna. The measurement results show an antenna gain of more than 5 dBi with a return loss of 18 dB at 60 GHz. The better‐than‐10‐dB impedance bandwidth of the antenna covers the 60‐GHz unlicensed band from 57 to 64 GHz. The 3‐dB beamwidths of the antenna are 105° and 76° at E‐plane and H‐plane at 60 GHz, respectively. The size of the die of the antenna is 2 mm × 4.5 mm. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:155–160, 2014.     

A revised particle swarm optimization based discrete Lagrange multipliers method for nonlinear programming problems

In this paper, a new algorithm for solving constrained nonlinear programming problems is presented. The basis of our proposed algorithm is none other than the necessary and sufficient conditions that one deals within a discrete constrained local optimum in the context of the discrete Lagrange multipliers theory. We adopt a revised particle swarm optimization algorithm and extend it toward solving nonlinear programming problems with continuous decision variables. To measure the merits of our algorithm, we provide numerical experiments for several renowned benchmark problems and compare the outcome against the best results reported in the literature. The empirical assessments demonstrate that our algorithm is efficient and robust.     

Plasma Internal Inductance in the Presence of External Resonant Fields in IR-T1 Tokamak

In this paper we presented experimental investigation of effects of local limiter biasing (V_biasing = +200 v, V_biasing = +320 v) on the plasma parameters as plasma current, loop voltage, poloidal beta, plasma pressure, plasma energy, plasma resistance, plasma temperature, plasma displacement, Shafranov parameter and plasma internal inductance in IR-T1 tokamak. For these purposes, array of magnetic probes and also a diamagnetic loop have been used. The results show that applied biased voltage V_biasing = +200 v causes to decrease of about 40 % in plasma internal inductance. The plasma resistance and the plasma displacement have been decreased by V_biasing = +200 v. The main result of the application of V_biasing = +200 v is flatting the plasma parameters profiles. In other words, the addition of biasing voltage V_biasing = +200 v to plasma could be effective for improving the quality of tokamak plasma discharge by creating the steady state plasma. The plasma current, plasma pressure, plasma energy, plasma temperature and shift parameter have increased after the application of limiter biasing with V_biasing = +320 v but they decrease rapidly.     

Thermogravimetric analysis and kinetic study of heavy oil pyrolysis

Pyrolysis, so-called devolatilization, is one of the first steps of all thermochemical processes occurring in an inert atmosphere. The authors discuss the main kinetic features of heavy oil pyrolysis, on the basis of the data derived m from a TGA analysis and by using a kinetic model. The samples were heated over a range of temperature from 400 K to 430°C at various heating rates between 10 and 80°C/min. Experimental results showed that the effect of time is considerable in the case of tar conversion, compared to char and gases.     

Interaction of α-Cyano-4-hydroxycinnamic Acid Drug with Inorganic BN Nanocluster: A Density Functional Study

We inspected the possibility of using a synthesized boron nitride nanocluster (B₁₂N₁₂) as a potential chemical sensor for anticancer α-cyano-4-hydroxycinnamic acid (CHC) drug by performing density functional theory calculations. It was found that CHC drug is mainly adsorbed via its acidic group on the BN nanocluster with adsorption energy about ??23.7 kcal/mol. In view of the high decrease of HOMO–LUMO energy gap (E_g) of the BN nanocluster after the adsorption process, it is expected that this process induces a significant increase in its electrical conductivity. Thus, the BN nanocluster is suggested as a potential sensor for CHC drug detection. We predicted that the BN cluster benefits from a short recovery time (~?22.7 s) and high sensitivity (55.2% decrease in the E_g). Also, it is interesting that the BN nanocluster can be used as a sensor in the pristine form without needing to the functionalization, doping, decoration, etc. Finally, we showed that by increasing the percentage of Hartree–Fock exchange of the functional, the adsorption energy, and sensitivity are increased and decreased, respectively. Also, the sensitivity of the BN nanocluster is predicted to decrease in water solution.     

Castor oil-based polyurethane coatings containing benzyl triethanol ammonium chloride: synthesis,characterization, and biological properties

In the present work, benzyl triethanol ammonium chloride (BTEAC) was employed as a reactive bactericidal additive for preparing of polyurethane coatings. In this regard, castor oil as a renewable resource-based polyol, polyethylene glycol (PEG1000), and BTEAC were reacted with toluene diisocyanate. Physical, mechanical, and thermal characteristics as well as biocompatibility and antibacterial properties of polyurethanes were evaluated. The prepared polyurethanes showed two-phase structure with soft and hard segments glass transition temperature transitions in the range of 18–70 and 85–153 °C, respectively. Initial modulus and tensile strength were improved for coatings with higher BTEAC content, while elongation at break and thermal stability were decreased. Hydrophilicity of coatings was increased for polyurethanes based on higher content of BTEAC and PEG1000. Polyurethanes with higher BTEAC content showed better cytocompatibility for mouse L929 fibroblast cells. Moreover, coatings with higher hydrophilicity and BTEAC content displayed superior antibacterial activity against both Escherichia coli and Staphylococcus aureus bacteria.     

Palladium nanoparticles as reusable catalyst for the synthesis of N-aryl sulfonamides under mild reaction conditions

An efficient palladium nanoparticles-catalyzed N-arylation of sulfonamides and sulfonyl azides is described. This procedure serves as an active protocol for intermolecular C–N bond formation using Pd(OAc)₂ in PEG-400 under air. Aryl bromides and triflates react at 35°C, while aryl chlorides require heating to 50°C and give the desired products only in low yields. This reaction proceeds smoothly in acceptable yields using low catalyst loading.     

Web services interoperability specifications

A proposed conceptual framework for analyzing Web services interoperability issues provides a context for studying existing standards and specifications and for identifying new opportunities to provide automated support, for this technology. Web services are becoming the technology of choice for realizing service-oriented architectures (SOAs). Web services simplify interoperability and, therefore, application integration. They provide a means for wrapping existing applications so developers can access them through standard languages and protocols.