Electrophoretic deposition of graphene oxide on carbon brush as bioanode for microbial fuel cell operated with real wastewater

Microbial fuel cell (MFC) is a promising technology for simultaneous wastewater treatment and energy harvesting. The properties of the anode material play a critical role in the performance of the MFC. In this study, graphene oxide was prepared by a modified hummer's method. A thin layer of graphene oxide was incorporated on the carbon brush using an electrophoretic technique. The deoxygenated graphene oxide formed on the surface of the carbon brush (RGO-CB) was investigated as a bio-anode in MFC operated with real wastewater. The performance of the MFC using the RGO-CB was compared with that using plain carbon brush anode (PCB). Results showed that electrophoretic deposition of graphene oxide on the surface of carbon brush significantly enhanced the performance of the MFC, where the power density increased more than 10 times (from 33 mWm^?2 to 381 mWm^?2). Although the COD removal was nearly similar for the two MFCs, i.e., with PCB and RGO-CB; the columbic efficiency significantly increased in the case of RGO-CB anode. The improved performance in the case of the modified electrode was related to the role of the graphene in improving the electron transfer from the microorganism to the anode surface, as confirmed from the electrochemical impedance spectroscopy measurements.     

Machine assignment and part-families formation using group technology

The conventional way of solving the group technology (GT) problem is to start from an assignment of parts to machines and try to find a partitioning of machine cells and part families. The similarity between parts is measured based on commonality of the machines assigned to them. However, parts are assigned to machines based on their operation requirements and the operation capabilities of machines. Similarity between parts should be based on their required operations. In this paper, the authors attempt to solve or facilitate solving the GT problem at the assignment level. An algorithm for assigning parts to machines is provided which utilizes the types of operations required by parts and applies GT principles in producing the assignment. This leads to better partitioning of machine cells and part-families. Furthermore, operation sequences required by parts in determining the similarity between parts have been considered. An algorithm to form part-families based on the operation sequence similarity coefficient has been developed. The resulting families are then used by the assignment algorithm to produce machine assignments to part-families. The use of the algorithm is demonstrated by examples.     

Postintegration methods for numerical integration of non-linear dynamic equations of motion

The paper presents a family of methods with postintegration, for numerical integration of non-linear dynamic equations of motion of discrete systems. Both explicit and implicit algorithms of these methods are conditionally stable, but can give solutions of accuracy of a few orders higher than the known methods with preintegration, corresponding to them. A general analysis of stability and accuracy of single-step methods is carried out. The postintegration methods have been tested on a single-degree-of-freedom non-linear system.     

Production of fungal enzymes and proteins from high salt cheese wheys

A fermentation procedure using wheys from buffalo milk, sweet rennet and salted wheys containing up to 15% NaC1, and based on the selection of salt-tolerant fungal cultures for production of microbial proteins and some economically important enzymes, is described. Certain strains of Aspergillus flavus, A. niger, A. ochraceus and A. terreus gave yields of mycelium ranging between 1.5 and 30 g on a dry weight basis. Strong proteolytic activities were exhibited by A. ochraceus, A. flavus and, to a lesser extent, by A. niger in the presence of salt up to 10% as final concentration. Powerful milk-clotting activities were also detected in culture supernatants of A. flavus and A. ochraceus. Extracellular β-galactosidases were released in to the culture fluids of these fungal strains with variable activities, depending upon the salt content of the growth medium. The application of the procedure is discussed.     

Depollution of atmospheric emissions of wood pyrolysis furnaces

The wood carbonization in Tunisia consists essentially of traditional activity using charcoaling stacks and pits characterized by high atmospheric pollution and poor energy conversion. Indeed, 70% of the initial mass of anhydrous wood are found in the vapor as aerosols, polluting and toxic gases and complex condensable organic compounds that can cause a substantial pollution of air, ground and water. Several processes of treatment and energy valorization of such effluents were proposed, but the incineration remains at present the most promising technique of depollution. The results show that the incineration, at about 1000°C, of wood carbonization smokes allows the destruction of 99% of the mass of pollutants except CO₂ and the reduction of polluting gas emission. The possible valorization of the smoke’s energy in the exit of the incinerator enhances the thermal efficiency of the process.     

Absorbing surface impedances of lossy layers in the finite difference time-domain method

In this paper the time-domain surface impedances of an homogeneous absorber layer, are given for the vertical and horizontal polarizations, or respectively for the electric field perpendicular or parallel to the incidence plane. It turns out that the application of the concept in finite difference time-domain (FDTD) in absorbing surface impedances boundary conditions, gives results in good agreement with analytical Fresnel reflection coefficients.     

A furostanol saponin from fruits of Balanites aegyptiaca

A new furostanol saponin was isolated from the mesocarp of Balanites aegyptiaca fruits and identified as 26-O-beta-D-glucopyranosyl-(25R)-furost-5-ene-3,22,26-triol 3-O-[[alpha-L-rhamnopyranosyl-(1-->2)]-[beta-D-xylopyranosyl-(1-->2)]-be ta- D-xylopyranosyl-(1-->2)]-beta-D-xylopyranoside (balanitesin).