An experimental study of a cross-flow type plate heat exchanger for dehumidification/cooling

The thermal and dehumidification behaviour of a standard cross-flow type plate heat exchanger, intended for use as a dehumidifier/cooler, has been investigated both experimentally and numerically. Three sets of experiments have been carried out where air is blown into the primary and secondary sides of the exchanger, while water and liquid desiccant were being sprayed in a counter flow arrangement. The first set represents the indirect evaporative cooling of the primary stream by the secondary air stream. The second set is with liquid desiccant only and no indirect evaporative cooling. In the third set of experiments the primary air stream is indirectly evaporatively cooled by the secondary air stream and dehumidified by the liquid desiccant sprayed into the primary side of the exchanger. The above experiments indicate that the heat exchanger performs well when used with liquid desiccant. Furthermore, for an exchanger angle of 45°, there is an optimum value of air mass flow rate at which the effectiveness and dehumidification efficiency of the plate heat exchanger are maxima. To investigate the effect of the ambient air conditions on the PHE performance, further experiments were carried out using a heater element and a humidifier. The results show that under laboratory conditions the exchanger effectiveness and dehumidification efficiency increase with increasing primary air inlet temperature and humidity ratio. The experimental results were used to validate a computer model developed for the cross-flow type plate heat exchanger/dehumidifier. Comparison indicates that the numerical results are in good agreement with the experiments.     

A game attention model for efficient bit rate allocation in cloud gaming

The widespread availability of broadband internet access and the growth in server-based processing have provided an opportunity to run games away from the player into the cloud and offer a new promising service known as cloud gaming. The concept of cloud gaming is to render a game in the cloud and stream the resulting game scenes to the player as a video sequence over a broadband connection. To meet the stringent network bandwidth requirements of cloud gaming and support more players, efficient bit rate reduction techniques are needed. In this paper, we introduce the concept of game attention model (GAM), which is basically a game context-based visual attention model, as a means for reducing the bit rate of the streaming video more efficiently. GAM estimates the importance of each macro-block in a game frame from the player’s perspective and allows encoding the less important macro-blocks with lower bit rate. We have evaluated nine game video sequences, covering a wide range of game genre and a spectrum of scene content in terms of details, motion and brightness. Our subjective assessment shows that by integrating this model into the cloud gaming framework, it is possible to decrease the required bit rate by nearly 25 % on average, while maintaining a relatively high user quality of experience. This clearly enables players with limited communication resources to benefit from cloud gaming with acceptable quality.     

THE EFFECT OF PRECIPITATION PARAMETERS ON PREPARATION OF LITHIUM FLUORIDE (LIF) NANO-POWDER

Lithium fluoride powder (LiF) is a white powder with a density of 2.64 gr/cm³ and a melting point of 848°C. This powder has several applications such as flux, glaze, soldering, and aluminum melting process, but one of the most important uses of this powder is its application in dosimetry. The commercial powders currently used for this purpose have average sizes of 5 to 10 micrometers; the objective of this research is to produce LiF powder with nano-metric particle size. In this study, the reaction of LiOH + HF → LiF + H₂O has been selected from among several reactions that were able to produce LiF powder, and some precipitation parameters such as temperature, time, agitation type, and supersaturation degree have been controlled. The morphology, phase analysis, and particle size distribution of the resulting powders were analyzed by SEM, XRD, and LPSA. Finally, lithium fluoride nano-powder was synthesized at a temperature of 25°C, pH about 2-3, reaction time less than 1 s, and agitation by ultrasonic bath.     

Miscibility behavior of blend of polyesteramides of linseed oil and dehydrated castor oil with poly(methacrylic acid)

Blending of two polymers in solution is a simple and cost‐effective technique to improve upon the physical and mechanical properties of the component polymers through synergism. To obtain maximum synergy in their properties, the component polymers should be miscible with each other on molecular scale. Polymer blends of complex physicomechanical properties are being actively investigated. Poly(methacrylic acid) (PMAA), a commercial polymer, yields transparent, hard, brittle, and water‐sensitive films. It has been blended with natural polymers like dextran, collagen, and gelatin to obtain films with improved physical and mechanical characteristics. Polyesteramides, which are easily synthesized from vegetable seeds oil, a sustainable resource, have found application in surface coatings. These oligomeric products do not make free standing films in the ambient condition. The polyesteramides from vegetable seeds oil can be used to obtain blend with PMMA of improved mechanical and water absorption properties. In this study, linseed oil polyesteramide (LOPEA) and dehydrated castor oil polyesteramide (DCPEA), the source oils with different unsaturation in their fatty acid chains, were blended with PMAA through mixing in solution in the ratio DCPEA/LOPEA: PMAA as 80/20, 70/30, 60/40, 50/50, 40/60, 30/70, and 20/80. In the first instance, the miscibility of the two components was investigated in solution by viscosity and ultrasonic measurements and in solid phase through differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Moisture absorption by the blend was also studied. DCPEA and LOPEA show immiscibility with PMAA in solution phase while LOPEA with more unsaturation in the fatty acid chain of the oil was found more immiscible than DCPEA. DCPEA shows a narrow miscibility window in the solid phase while LOPEA was found immiscible with PMAA in the solid phase too. Uptake of moisture was found to be markedly reduced in the blends of DCPEA/LOPEA with PMAA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1367–1374, 2007:     

On the performance of different capability indices under normal and non-normal distributions

In this article, we have examined the performance of some useful capability indices using normal and non-normal distributions. The confidence intervals are calculated and mean coverage rates are observed for different capability indices. The effects of symmetry and kurtosis of parent distributions are examined on the mean coverage rates of different capability indices. Moreover, we have investigated the robustness (of confidence interval) using the median and percentile-based indices. We have considered the well-known distributions including normal, gamma, t, Weibull, and chi-squared. For these process scenarios, we have observed that some indices resist disturbance only in symmetry of the parent distribution, some resist the disturbance in symmetry and kurtosis of the distribution, and some indices don’t resist against either type of disturbance.     

On the Efficiency of Runs Rules Schemes for Process Monitoring

There are two main types of variations, namely, common and special causes leading to in‐control and out‐of‐control states, respectively. Control charts are popular tools used to differentiate between these two states of a process. Implementation of runs rules schemes with control charts is an attractive approach for process monitoring. This study is designed to describe the methodology of runs rules schemes and discuss their implementation for different types of control charts. We have considered memory‐less charts, namely, , S, and R charts for our study purposes. It is examined that the efficiency gain depends on the number of decision points utilized to implement a given rule. Moreover, superiority of runs rules schemes may vary for different types of location and dispersion charts. An application example using a dataset is also included in the study for practical considerations. Copyright © 2015 John Wiley & Sons, Ltd.     

A New Combined Shewhart–Cumulative Sum S Chart for Monitoring Process Standard Deviation

The combined application of a Shewhart chart and cumulative sum (CUSUM) control chart is an effective tool for the detection of all sizes of process shifts as the scheme combines the advantages of a CUSUM at detecting small to moderate shifts and Shewhart for the quick detection of very large shifts. This article proposes new combined Shewhart–CUSUM S charts based on the extreme variations of ranked set sampling technique, for efficient monitoring of changes in the process dispersion. Using Monte Carlo simulations, the combined scheme is designed to minimize the average extra quadratic loss over the entire process shift domain. The results show that the combined Shewhart–CUSUM S charts uniformly outperform several other procedures for detecting increases and decreases in the process variability. Moreover, the proposed scheme can detect changes that are small enough to escape the Shewhart S chart or fairly large to escape detection by the CUSUM S chart. Numerical example is given to illustrate the practical application of the proposed scheme using real industrial data. Copyright © 2015 John Wiley & Sons, Ltd.     

Design, fabrication and control of a magnetic capsule-robot for the human esophagus

Much research on the development of a robotic capsule and micro robot for the diagnosis of gastrointestinal diseases has been carried out. The powering of these micro systems is becoming very challenging as the implementation of such systems is limited due to the existence of on-board power supplies. This paper presents a micro robotic system based on magnetic principles. The goal is to build a system in which a capsule-robot can be manipulated wirelessly inside an enclosed environment such as human??s body. A prototype of capsule-robot is built and tested, that can be remotely operated with three DOF in an enclosed environment by transferring magnetic energy and electromagnetic waves. A magnetic drive unit generates magnetic energy for the manipulation. Experimental results show the capsule-robot is manipulated and moved through a desired trajectory in a viscous fluid. The capsule-robot can be potentially used for endoscopy and colonoscopy.     

An integrated model for closed-loop supply chain configuration and supplier selection: Multi-objective approach

Reverse logistics consists of all operations related to the reuse of products. External suppliers are one of the important members of reverse logistics and closed loop supply chain (CLSC) networks. However in CLSC network configuration models, suppliers are assessed based on purchasing cost and other factors such as on-time delivery are ignored. In this research, a general closed loop supply chain network is examined that includes manufacturer, disassembly, refurbishing, and disposal sites. Meanwhile, it is managed by the manufacturer. We propose an integrated model which has two phases. In the first phase, a framework for supplier selection criteria in RL is proposed. Besides, a fuzzy method is designed to evaluate suppliers based on qualitative criteria. The output of this stage is the weight of each supplier according to each part. In the second phase, we propose a multi objective mixed-integer linear programming model to determine which suppliers and refurbishing sites should be selected (strategic decisions), and find out the optimal number of parts and products in CLSC network (tactical decisions). The objective functions maximize profit and weights of suppliers, and one of them minimizes defect rates. To our knowledge, this model is the first effort to consider supplier selection, order allocation, and CLSC network configuration, simultaneously. The mathematical programming model is validated through numerical analysis.