Scanning Acoustic Microscopy of SCS-6 Silicon Carbide Fiber

Scanning acoustic microscopy of SCS-6 silicon carbide fiber reveals large radial variations in acoustic reflectivity associated with the chemical composition and microstructure of a given fiber region. Rayleigh wave fringe patterns observed in each of five subregions are used to calculate the average Young modulus of that subregion. The Young modulus is found to increase monotonically from 40 GPa in the carbon core to a value of 413 GPa in the stoichiometric SiC region. The effective Young modulus of the fiber as a whole is estimated from the moduli of the individual regions and it is compared with mechanical measurements reported in the literature.     

Biodegradation and corrosion behavior of manganese oxidizer Bacillus cereus ACE4 in diesel transporting pipeline

The degradation problem of petroleum products arises since hydrocarbon acts as an excellent food source for a wide variety of microorganisms. Microbial activity leads to unacceptable level of turbidity, corrosion of pipeline and souring of stored product. The present study emphasizes the role of Bacillus cereus ACE4 on degradation of diesel and its influence on corrosion of API 5LX steel. A demonstrating bacterial strain ACE4 was isolated from corrosion products and 16S rRNA gene sequence analysis showed that it has more than 99% similarity with B. cereus. The biodegradation and corrosion studies revealed that B. cereus degraded the aliphatic protons and aromatic protons in diesel and is capable of oxidizing ferrous/manganese into oxides. This is the first report that discloses the involvement of manganese oxidizer B. cereus ACE4 on biodegradation of diesel and its influence on corrosion in a tropical country pipeline.     

Nanocrystalline orthoferrite powders: Synthesis and magnetic properties

Nanocrystalline orthoferrite powders were synthesised at low temperatures by employing an aqueous sol–gel process. Colloidal sols and water re-dispersible gels of orthoferrite precursors were prepared by room-temperature processing of inexpensive metal salts. The average diameter (Z_av) of the precursor particles was in the size range from 4 to 7 nm; the diameters had a narrow size distribution. Water re-dispersible translucent gel monoliths were obtained by concentrating the aqueous sols followed by drying them under reduced pressure (10⁻² Torr) at room temperature. The sol–gel transition was found to be completely reversible. Nanocrystalline fine powders of orthoferrites of general formula, LnFeO₃ (Ln = La, Sm, Gd, Dy, Er, Yb and Y) having a crystallite size of about 25 nm were prepared by heating the gel precursors at 650–700 °C in air. Powder X-ray diffraction and thermogravimetry, respectively, were employed to identify perovskite phase formation and delineate thermal events that lead to gel to crystallite conversion. Magnetic measurements were carried out on the resultant powders at room temperature and down to 40 K. Nanocrystalline orthoferrite powders exhibited weak ferromagnetic behaviour, and reduced magnetic moments.     

A study of synthesizing benzaldehydes from propenylbenzenes and cinnamic acid derivatives

Propenylbenzenes and cinnamic acid derivatives yield correspondingly substituted benzaldehydes when oxidized by lead-ruthenium pyrochlore oxide in the presence of sodium hydrochlorite as a co-oxidant at pH 11 under heterogeneous conditions. The reaction of terminal and internal aliphatic alkenes under similar conditions affords no aldehydes.     

Distribution of Etoposide-Loaded Hydrophilic Albumin Microspheres in Mice

Hydrophilic albumin microspheres of etoposide were prepared by the emulsion polymerization technique using glutaraldehyde as the cross-linking agent. The microspheres prepared had a mean diameter of 1.5 μm. The microspheres were injected into mice by the intravenous route. In all, 12 mice were selected for the study, out of which 10 were given the drug-loaded microspheres and 2 were kept as solvent control. The mice were sacrificed after 24 hr and the accumulation of drug was determined in lungs, liver, and kidney.     

Evaluation of high Ni-Cr-Mo alloys for the construction of sulfur dioxide scrubber plants

Corrosion in wet lime/limestone systems used for flue gas desulfurization in thermal power plants is of great concern. The frequent variations in acidity and in chloride and fluoride ion concentrations experienced by such systems pose a serious threat to the materials of construction. Currently used materials mostly type 316L stainless steel often fail to meet their life expectancy. The present study evaluates the performance of advanced Ni- Cr- Mo alloys 59 and C- 276 in a simulated sulfur dioxide scrubber environment. Accelerated tests showed that high Ni- Cr- Mo alloys have little tendency to leach metal ions such as chromium, nickel, and molybdenum at different impressed potentials. Scanning electron microscopy was used to examine the morphology of pitting attack.     

An investigation of 2'-deoxyribonucleoside cyanoboranes in mice for therapeutic safety

A standard acute toxicity study was undertaken to assess 2'-deoxyribonucleoside cyanoboranes for therapeutic safety. 2'-Deoxyribonucleoside cyanoboranes and related derivatives were nontoxic at doses required for anti-neoplastic and hypolipidemic activities. At higher doses (50 and 100 mg/kg/day IP for 7 days), all treated animals survived with slight reductions in total body weight and small decrements in daily food consumption. No clinical chemistry value was elevated to a magnitude suggesting onset of organ specific toxicity. However, agents appeared to modulate subpopulations of white blood cells, i.e., more lymphocytes than PMNs were present in blood from treated animals as determined by differential cell counts. This modulation is correlated with increases in granulomatous foci in the spleen and mesentery of treated animals after 7 days. The kidney was damaged only by Compound 5 at 50 and 100 mg/kg/day; Compound 5 had the most potent anti-neoplastic activity. The compounds demonstrated no in vitro toxicity against human HCT-8 ileum cells. LD(50) values were greater than 1000 mg/kg, IP, for all compounds.     

Network Lifetime Enhancement of Wireless Sensor Networks Using EFRP Protocol

This paper presents a novel transceiver architecture for in-band full duplex radio. A transceiver for full duplex radio requires a self-interference (SI) canceler to remove the SI occurring from the transmitter to the receiver, and a full duplex transceiver generally has two SI cancelers: one at the analog RF stage and the other at the baseband stage. The output from the SI canceler at the RF stage includes much residual SI, and it decreases the number of bits allocated to the analog baseband signal at the analog-to-digital converter. A 1-tap analog baseband SI canceler that uses a replica signal including only the direct path component of the residual SI has been presented for preventing degradation. However, the architecture cannot remove the SI well due to the high Ricial K-factor. To address the problem, the presented architecture has an SI canceler at the analog baseband stage, and this canceler employs a replica signal that is output from a digital-to-analog converter. Because the replica signal is generated in the digital domain, the architecture can generate a multipath replica signal, and improved performance can be expected. Numerical and theoretical analyses are shown to validate the effectiveness of the presented architecture.

     

Stochastic Gradient Boosting Model for Twitter Spam Detection

In today’s world of connectivity there is a huge amount of data than we could imagine. The number of network users are increasing day by day and there are large number of social networks which keeps the users connected all the time. These social networks give the complete independence to the user to post the data either political, commercial or entertainment value. Some data may be sensitive and have a greater impact on the society as a result. The trustworthiness of data is important when it comes to public social networking sites like facebook and twitter. Due to the large user base and its openness there is a huge possibility to spread spam messages in this network. Spam detection is a technique to identify and mark data as a false data value. There are lot of machine learning approaches proposed to detect spam in social networks. The efficiency of any spam detection algorithm is determined by its cost factor and accuracy. Aiming to improve the detection of spam in the social networks this study proposes using statistical based features that are modelled through the supervised boosting approach called Stochastic gradient boosting to evaluate the twitter data sets in the English language. The performance of the proposed model is evaluated using simulation results.

     

Optical detection of CA 15.3 breast cancer antigen using CdS quantum dot

The present study focus on optical sensing of breast cancer antigen 15.3 (CA 15.3) using cadmium sulphide quantum dot (CdS‐QD) in saline and serum samples spiked with antigen. The surface of CdS‐QD was modified by cysteamine capping followed by tagging of CA 15.3 antibody. The samples were characterised using UV‐visible absorption spectroscopy (UV‐VIS Spectroscopy), Fourier transform infrared spectroscopy (FTIR), high‐resolution transmission electron microscopy (HRTEM) attached with energy‐dispersive X‐ray spectroscopy, phase contrast inverted epi‐fluorescence microscopy and photoluminescence (PL) spectrophotometry (EDS). The CdS‐QD showed a mean diameter of 3.02 ± 0.6 nm. The complex formed after antigen‐antibody interaction resulted in distinguishable optical and fluorescence intensity with respect to varying concentration of antigen. The PL study revealed that CA 15.3 antibody labelled CdS QD can detect CA 15.3 tumour marker even at very low concentration of 0.002 KU/L with a constant response time of 15 min. This study clearly indicates that detection of CA 15.3 at low concentration is possible using surface modified CdS QD in serum samples and can find immense applications in biosensor development for detection of breast cancer marker similar to various automated detection kits available in market.Inspec keywords: semiconductor quantum dots, cadmium compounds, II‐VI semiconductors, wide band gap semiconductors, cancer, tumours, optical sensors, biosensors, biomedical equipment, visible spectra, ultraviolet spectra, Fourier transform infrared spectra, transmission electron microscopy, X‐ray chemical analysis, fluorescence, optical microscopy, photoluminescence, proteins, molecular biophysics, nanosensors, nanomedicine, nanoparticlesOther keywords: optical detection, CA 15.3 breast cancer antigen, optical sensing, cadmium sulphide quantum dot, saline samples, serum samples, cysteamine capping, CA 15.3 antibody, UV‐visible absorption spectroscopy, Fourier transform infrared spectroscopy, high‐resolution transmission electron microscopy, energy dispersive X‐ray spectroscopy, phase contrast inverted epifluorescence microscopy, photoluminescence spectrophotometry, antigen‐antibody interaction, fluorescence intensity, optical intensity, CA 15.3 tumour marker, surface modified CdS QD, biosensor development, time 15 min, CdS