Study of dielectric properties of RbNO3 single crystals

Dielectric properties, dielectric constant (k), dielectric loss (tan δ) and a.c. conductivity (σ) in the solution-grown single crystals of RbNO₃ are presented from room temperature to about 200°C covering the frequency range 10² to 10⁵ Hz. A broad peak observed in tan δ-frequency data between 10³ and 10⁵Hz is thought to be due to impurity-vacancy dipoles. The sudden rise of three parameters near 160°C is attributed to the known phase transition from trigonal to CsCl structure.     

A post quantum secure construction of an authentication protocol for satellite communication

Satellite's communication system is used to communicate under significant distance and circumstances where the other communication systems are not comfortable. Since all the data are exchanged over a public channel, so the security of the data is an essential component for the communicating parties. Both key exchange and authentication are two cryptographic tools to establish a secure communication between two parties. Currently, various kinds of authentication protocols are available to establish a secure network, but all of them depend on number–theoretical (discrete logarithm problem/factorization assumption) hard assumptions. Due to Shor's and Grover's computing algorithm number theoretic assumptions are breakable by quantum computers. Although Kumar and Garg have proposed a quantum attack-resistant protocol for satellite communication, it cannot resist stolen smart card attack. We have analyzed that how Kumar and Garg is vulnerable to the stolen smart card attack using differential power analysis attack described in He et al and Chen and Chen. We have also analyzed the modified version of signal leakage attack and sometimes called improved signal leakage attack on Kumar and Garg's protocol. We have tried to construct a secure and efficient authentication protocol for satellites communication that is secure against quantum computing. This is more efficient as it requires only three messages of exchange. This paper includes security proof and performance of the proposed authentication and key agreement protocol.     

Face expression recognition system based on ripplet transform type II and least square SVM

Multimedia Tools and Applications - This paper discusses the development of an efficient and automated system for the recognition of facial expressions, which is essentially an application...     

Extremozymes from metagenome: Potential applications in food processing

The long-established use of enzymes for food processing and product formulation has resulted in an increased enzyme market compounding to 7.0% annual growth rate. Advancements in molecular biology and recognition that enzymes with specific properties have application for industrial production of infant, baby and functional foods boosted research toward sourcing the genes of microorganisms for enzymes with distinctive properties. In this regard, functional metagenomics for extremozymes has gained attention on the premise that such enzymes can catalyze specific reactions. Hence, metagenomics that can isolate functional genes of unculturable extremophilic microorganisms has expanded attention as a promising tool. Developments in this field of research in relation to food sector are reviewed.     

Influence of 2,3-Dihydroxyflavanone on Corrosion Inhibition of Mild Steel in Acidic Medium

The inhibition effect of 2,3-dihydroxyflavone on the corrosion of mild steel in 100-600 ppm aqueous hydrochloric acid solution has been investigated by weight loss and electrochemical impedance spectroscopy. The corrosion inhibition efficiency increases with increasing concentration and time. The effect of temperature on the corrosion behavior of mild steel in 1 M HCl with addition of inhibitor was studied at the temperature range of 300-330 K. UV-Vis, FTIR, and surface analysis (SEM) was also carried out to establish the corrosion inhibitive property of this inhibitor in HCl solution. The adsorption of this inhibitor on the mild steel surface obeys the Langmuir adsorption isotherm. Electrochemical studies reveal that the inhibitor is a cathodic type.     

Gecko‐Inspired Dry Adhesive for Robotic Applications

Most geckos can rapidly attach and detach from almost any kind of surface. This ability is attributed to the hierarchical structure of their feet (involving toe pads, setal arrays, and spatulae), and how they are moved (articulated) to generate strong adhesion and friction forces on gripping that rapidly relax on releasing. Inspired by the gecko's bioadhesive system, various structured surfaces have been fabricated suitable for robotic applications. In this study, x–y–z asymmetric, micrometer‐sized rectangular flaps composed of polydimethylsiloxane (PDMS) were fabricated using massively parallel micro‐electromechanical systems (MEMS) techniques with the intention of creating directionally responsive, high‐to‐low frictional‐adhesion toe pads exhibiting properties similar to those found in geckos. Using a surface forces apparatus (SFA), the friction and adhesion forces of both vertical (symmetric) and angled/tilted (x–y–z asymmetric) microflaps under various loading, unloading and shearing conditIons were investigated. It was found that the anisotropic structure of tilted microflaps gives very different adhesion and tribological forces when articulated along different x–y–z directions: high friction and adhesion forces when articulated in the y–z plane along the tilt (+y) direction, which is also the direction of motion, and weak friction and adhesion forces when articulated against the tilt (–y) direction. These results demonstrate that asymmetric angled structures, as occur in geckos, are required to enable the gecko to optimize the requirements of high friction and adhesion on gripping, and low frictional‐adhesion on releasing. These properties are intimately coupled to a (also optimum) articulation mechanism. We discuss how both of these features can be simultaneously optimized in the design of robotic systems that can mimic the gecko adhesive system.     

Formulation and evaluation of Methocel K15M bioadhesive matrix tablets

Methocel K15M is a bioadhesive polymer. Its adhesion and bioadhesion characteristics were evaluated by shear stress measurement and detachment force measurement methods, respectively. The effect of pH on adhesion was studied, and it was found that the maximum adhesion was between pH 5 and pH 6. Adhesion strength at different parts of the sheep intestine was studied; in the duodenal portion of the intestine, the adhesion was maximum. Chlorpheniramine maleate and diclofenac sodium drugs are formulated with Methocel K15M as matrix tablets. In vitro release studies revealed that some of the formulations showed initial first-order behavior followed by zero-order release behavior.     

Desire for euthanasia or physician-assisted suicide in palliative cancer care.

Objective: To investigate the attitudes of terminally ill individuals toward the legalization of euthanasia or physician-assisted suicide (PAS) and to identify those who would personally desire such a death. Design: In the Canadian National Palliative Care Survey, semistructured interviews were administered to 379 patients who were receiving palliative care for cancer. Patients who expressed a desire for physician-hastened death were followed prospectively. Main Outcome Measures: Attitudes toward the legalization of euthanasia or PAS were determined, as was the personal interest in receiving a hastened death. Demographic and clinical characteristics were also recorded, including a 22-item structured interview of symptoms and concerns. Results: There were 238 participants (62.8%) who believed that euthanasia and/or PAS should be legalized, and 151 (39.8%) who would consider making a future request for a physician-hastened death. However, only 22 (5.8%) reported that, if legally permissible, they would initiate such a request right away, in their current situations. This desire for hastened death was associated with lower religiosity (p = .010), reduced functional status (p = .024), a diagnosis of major depression (p     

CoopMAC: A Cooperative MAC for Wireless LANs

Due to the broadcast nature of wireless signals, a wireless transmission intended for a particular destination station can be overheard by other neighboring stations. A focus of recent research activities in cooperative communications is to achieve spatial diversity gains by requiring these neighboring stations to retransmit the overheard information to the final destination. In this paper we demonstrate that such cooperation among stations in a wireless LAN (WLAN) can achieve both higher throughput and lower interference. We present the design for a medium access control protocol called CoopMAC, in which high data rate stations assist low data rate stations in their transmission by forwarding their traffic. In our proposed protocol, using the overheard transmissions, each low data rate node maintains a table, called a CoopTable, of potential helper nodes that can assist in its transmissions. During transmission, each low data rate node selects either direct transmission or transmission through a helper node in order to minimize the total transmission time. Using analysis, simulation and testbed experimentation, we quantify the increase in the total network throughput, and the reduction in delay, if such cooperative transmissions are utilized. The CoopMAC protocol is simple and backward compatible with the legacy 802.11 system. In this paper, we also demonstrate a reduction in the signal-to-interference ratio in a dense deployment of 802.11 access points, which in some cases is a more important consequence of cooperation