An expert system for XPLE cable deterioration diagnosis and life forecasting

The recent increase in the demand for power in urban areas has caused changes in the way power is supplied. Underground distribution systems have been introduced for convenience in urban areas and to prevent injuries in case of a crisis. As a result, many new types of power cables are being used. One type, XPLE cables (also called CV cables) have been rapidly taking the place of conventional cables such as OF or SL cables since the 1960s because of their relatively easy installation and maintainability. However, distribution cables used under severe environmental conditions deteriorate rapidly (due mainly to water treeing), and some cables experience insulation breakdown. Therefore, many diagnostic methods have been developed, though they have not been very effective. By combining methods, a high reliability can be achieved in comparison to the use of a single method. However, processing the data is difficult for on-site personnel, so many experts are required. But there is a lack of qualified experts, hence we have turned to the development of expert systems.     

Training of a feedforward multiple-valued neural network by error backpropagation with a multilevel threshold function.

A technique for the training of multiple-valued neural networks based on a backpropagation learning algorithm employing a multilevel threshold function is proposed. The optimum threshold width of the multilevel function and the range of the learning parameter to be chosen for convergence are derived. Trials performed on a benchmark problem demonstrate the convergence of the network within the specified range of parameters.     

Biplane computed cerebral angiotomography of moyamoya disease (author's transl)

In this paper, the authors report biplane computed cerebral angiotomographic findings in 5 cases of Moyamoya disease. The specific features of Moyamoya disease on the CT image were as follows: On the axial plane, the linear structures of the anterior half of the circle of Willis and the proximal portion of the middle cerebral arteries disappeared, and instead of these normal structures, irregular, tortuous or patchy high-density areas just like a "caterpillar" were shown in the basal cistern and medial Sylvian fissures. On the modified coronal plane, the supraclinoid internal carotid arteries and the carotid fork could be identified only with a difficulty, and abnormal, "nebular" high-density areas consisting of irregular, tortuous or patchy high-density vascular components became visible in the basal cistern extending to the basal ganglia. A modified coronal plane and intravenous minimum dose bolus injection method seemed to be more useful for the visualization of these specific features on the CT image. Even before carotid angiography, we can suspect Moyamoya disease for finding these specific features on the CT image. Carotid angiography has been the only method of diagnosing Moyamoya disease. Instead of this invasive examination, computed cerebral angiotomography is useful in detecting Moyamoya disease conveniently and non-invasively. Therefore, we may conclude that computed cerebral angiotomography is very useful method for screening and follow up study of Moyamoya disease.     

Preparation of a crack-free rough titania coating on stainless steel mesh by electrophoretic deposition

TiO₂ (anatase) coating was prepared on stainless mesh by electrophoretic (EPD) process utilizing an isopropyl alcohol (IPA)-based suspension with submicron TiO₂ powder. When the deposition time was 30 s, a smooth thin coating was obtained. It remained crack-free even after sintering. Coating surface morphology was roughened by UV pre-illumination of the suspension. Photocatalytic decomposition of IPA to acetone and resultant electrochemical reaction at cathode during EPD provides heterogeneous deposition.     

Experimental investigation of structure vulnerabilities to firebrand showers

Attempting to experimentally quantify the vulnerabilities of structures to ignition from firebrand showers has remained elusive. The coupling of two facilities has begun to unravel this difficult problem. The NIST Firebrand Generator (NIST Dragon) is an experimental device that can generate a firebrand shower in a safe and repeatable fashion. Since wind plays a critical role in the spread of WUI fires in the USA and urban fires in Japan, NIST has established collaboration with the Building Research Institute (BRI) in Japan. BRI maintains one of the only full scale wind tunnel facilities in the world designed specifically for fire experimentation; the Fire Research Wind Tunnel Facility (FRWTF). The present investigation is aimed at extensively quantifying firebrand penetration through building vents using full scale tests. A structure was placed inside the FRWTF and firebrand showers were directed at the structure using the NIST Dragon. The structure was fitted with a generic building vent, consisting of only a frame fitted with a metal mesh. Six different mesh sizes openings were used for testing. Behind the mesh, four different materials were placed to ascertain whether the firebrands that were able to penetrate the building mesh assembly could ignite these materials. Reduced scale test methods afford the capability to test new vent technologies and may serve as the basis for new standard testing methodologies. As a result, a new experimental facility developed at NIST is presented and is known as the NIST Dragon's LAIR (Lofting and Ignition Research). The NIST Dragon's LAIR has been developed to simulate a wind driven firebrand attack at reduced scale. The facility consists of a reduced scale Firebrand Generator (Baby Dragon) coupled to a bench scale wind tunnel. Finally, a series of full scale experiments were conducted to visualize the flow of firebrands around obstacles placed downstream of the NIST Dragon. Firebrands were observed to accumulate in front of these obstacles at a stagnation plane, as was observed when the structure was used for firebrand penetration through building vent experiments, due to flow recirculation. The accumulation of firebrands at a stagnation plane presents a severe threat to ignitable materials placed near structures.     

Effects of dressing containing plant sterol on serum cholesterol concentration and the safety evaluation in borderline or mildly hypercholesterolemic Japanese subjects

In a placebo-controlled double-blind study, we examined the effects of dressing containing plant sterol (PS) on blood lipids and the safety in Japanese borderline or mildly hypercholesterolemic subjects. Fifty-nine subjects [total cholesterol (TC) concentration > or = 200 mg/dL] were randomly divided into two groups and were given daily 15 g of dressing containing 800 mg of PS [PS(+)-group] or without PS [PS(-)-group] for 12 weeks. Every 4 weeks, fasting blood was examined and subjective symptoms were analyzed. Serum TC, low-density lipoprotein cholesterol (LDL-C) and apolipoprotein B (ApoB) concentrations did not change in the PS(-)-group, while TC and ApoB significantly decreased in the PS(+)-group at 8 and 12 weeks and LDL-C at 4, 8 and 12 weeks. Moreover, serum TC, LDL-C and ApoB concentrations were significantly lower than those of PS(-)-group at 8 and 12 weeks. Other laboratory tests were all in normal ranges and no adverse events were observed. The results indicated that PS-containing dressing decreased serum TC, LDL-C and ApoB concentrations in borderline or mildly hypercholesterolemic subjects. It is therefore proved that the dressing containing PS is helpful in maintaining blood cholesterol level normal and hence, the health of Japanese.     

Developmental ability of cloned embryos from neural stem cells

The success rate is generally higher when cloning mice from embryonic stem (ES) cell nuclei than from somatic cell nuclei, suggesting that the embryonic nature or the undifferentiated state of the donor cell increases cloning efficiency. We assessed the developmental ability of cloned embryos derived from cultured neural stem cell (NSC) nuclei and compared the success rate with that of embryos cloned from other donor cells such as differentiated NSCs, cumulus cells, Sertoli cells and ES cells in the mouse. The transfer of two-cell cloned embryos derived from cultured NSC nuclei into surrogate mothers produced five live cloned mice. However, the success rate (0.5%) was higher in embryos cloned from cultured NSC nuclei than from differentiated NSCs (0%), but lower than that obtained by cloning mice from other cell nuclei (2.2-3.5%). Although the in vitro developmental potential to the two-cell stage of the cloned embryos derived from NSC nuclei (73%) was similar to that of the cloned embryos derived from other somatic cell nuclei (e.g., 85% in Sertoli cells and 75% in cumulus cells), the developmental rate to the morula-blastocyst stage was only 7%. This rate is remarkably lower than that produced from other somatic cells (e.g., 50% in Sertoli cells and 54% in cumulus cells). These results indicate that the undifferentiated state of neural cells does not enhance the cloning efficiency in mice and that the arrest point for in vitro development of cloned embryos depends on the donor cell type.     

Experimental and Molecular Dynamics Simulations of Tribochemical Reactions with ZDDP: Zinc Phosphate–Iron Oxide Reaction

Zinc phosphate glass is considered to be the main constituent of tribofilms generated under boundary lubrication with zinc dialkyldithiophosphate (ZDDP), a well-known antiwear additive. The reaction occurring during friction between zinc phosphate glasses and steel native iron oxide layer is investigated by both an experimental approach and by Molecular Dynamics simulations (MD). The importance of this “tribochemical” reaction in the general ZDDP antiwear process is discussed.     

A Comparison of Equating Methods and Linking Designs for Developing an Item Pool under Item Response Theory

The existence of an item pool can bring out the various merits of using item response theory (IRT). This study considered the case where the development of an item pool is in progress. We examined the robustness of four calibration methods in three linking designs using simulated data. The data were generated assuming that a small-sized item pool had already been developed and new items were to be added to that item pool. The results suggested that the item characteristic curve method generally performed well. The performance of the fixed common item parameter calibration method and the concurrent calibration method worsened in one of the linking designs where the number of common items was small. The results also suggested that performance was better when the sample size per form and the number of common items were large.

     

Suppression of inducible nitric oxide synthase expression and amelioration of lipopolysaccharide-induced liver injury by polyphenolic compounds in Eucalyptus globulus leaf extract

Eucalyptus leaf extract (ELE) is rich in hydrolyzable tannins. We examined the effects of ELE and its constituents on lipopolysaccharide (LPS)-induced liver injury in mice. Mice fed a diet supplemented with 1% ELE were intraperitoneally administered LPS. Six hours later, the serum alanine aminotransferase (ALT) and aspartate aminotransferase (AST) activities were significantly lower in the ELE-supplemented mice than in the controls; LPS-induced hepatic inducible nitric oxide synthase (iNOS) expression was also suppressed. ELE lowered LPS-stimulated iNOS expression in cultured RAW 264.7 macrophages. Furthermore, the aglycones of hydrolyzable tannins, gallic acid (GA) and ellagic acid (EA), inhibited iNOS induction to a greater extent than did ELE (15-fold higher). When mice were fed a 1% GA or EA diet, the increase in the serum ALT and AST activities and hepatic iNOS expression in response to the LPS challenge were significantly attenuated. Thus, hydrolyzable tannins in ELE ameliorate LPS-induced liver injury.