An efficient manufacturing method for I-shaped cross-sectional CFRP beam with arbitrary arrangement of carbon fiber using electro-activated resin molding

Abstract

The I-shaped cross-sectional beam of CFRP (CFRP I-beam) is usually manufactured by the continuous protrusion method. Carbon fibers can only be arranged in the longitudinal direction. The CFRP I-beam with arbitrary arrangement of carbon fiber was manufactured with applying the electro-activated deposition molding method. The carbon fiber fabric was immersed in the deposition solution and energized, epoxy resin precipitated around carbon fiber and impregnated. The resin-impregnated fabric was installed to the mold, and the CFRP I-beam was fabricated. The CFRP I-beam was subjected to three-point bending tests, and the relationship between load-deflection was simulated by finite-element analysis.     

Thermal and dielectric properties of zirconyl phosphate compact

Experimental results are presented on the measurements of thermal expansion (up to 1500°C), thermal conductivity (up to 1000°C), dielectric constant (up to 450 °C) and tan (up to 800 °C) of zirconyl phosphate compacts obtained by sintering at 1600°C. The thermal expansion coefficient of the samples at the temperature below 1100°C was less than 1.7 × 10^–6°C^–1. The samples showed a definite shrinkage at temperatures of 1110 and 1470°C due to the phase transformations. The expansion at 1500°C was less than that at 1100°C probably because of the phase transformation. The thermal conductivity at room temperature was a very small value (0.0046 to 0.0065 cal s^–1 cm°C^–1 cm^–2). The dielectric constant was close to 9. The value of tan° (–0.0001) measured is one of the lowest values for ceramic materials.     

Effect of applying voltage on photocatalytic destruction of 1,4-dioxane in aqueous system

In the current work, we prepared a TiO₂ coating on stainless mesh using electrophoretic deposition (EPD), and applied voltage to a stainless mesh to examine the synergy effect on photocatalysis of both 1,4-dioxane and ethylene glycol diformate (EGDF), a main intermediate of the photocatalysis of 1,4-dioxane. The photocatalytic decomposition rate of 1,4-dioxane depends on applying voltage under diffusion-limited reaction conditions. Ethylene glycol diformate and 1,4-dioxane exhibited inverse voltage dependence. Voltage swing provides high-efficiency photocatalysis of 1,4-dioxane while suppressing EGDF formation. This method will be effective for a photocatalysis system containing several chemicals, each with different voltage dependence.     

Preparation of a crack-free rough titania coating on stainless steel mesh by electrophoretic deposition

TiO₂ (anatase) coating was prepared on stainless mesh by electrophoretic (EPD) process utilizing an isopropyl alcohol (IPA)-based suspension with submicron TiO₂ powder. When the deposition time was 30 s, a smooth thin coating was obtained. It remained crack-free even after sintering. Coating surface morphology was roughened by UV pre-illumination of the suspension. Photocatalytic decomposition of IPA to acetone and resultant electrochemical reaction at cathode during EPD provides heterogeneous deposition.     

Human Response to Emergency Communication: A Review of Guidance on Alerts and Warning Messages for Emergencies in Buildings

The purpose of this article is to provide guidance on enhancing human response to emergency communication. This guidance can, in turn, help engineers improve the design of emergency notification and messaging systems, which, as a result, can help inform occupant response, reduce occupant evacuation time, and increase occupant safety. The article begins with a literature review on how people respond to emergencies. The Protective Action Decision Model, which describes the decision-making process that precedes human response in disaster events, is used as a framework for the literature collected as part of this review. This model is divided into three pre-decisional and five decisional processes. The method used to create the guidance document is then explained, including the six steps taken to review the literature collected (from 162 engineering and social science sources), generate findings from this literature, and compile the key statements found in the guidance document. Guidance on alerts, visual/audible warnings and dissemination of warning messages are provided. These are organized according to alert/warning type and dissemination method. The findings of the literature review include five guidance statements on alerts, 16 guidance statements on visual warnings, seven guidance statements on audible warnings and eight guidance statements on the dissemination of warning messages. Finally, guidance on emergency message testing, including language, readability and fire drills as a means of response testing, is provided. It is envisioned that this guidance will inform practitioners on the design of future emergency communications and subsequently enhances evacuee performance through a better understanding of the manner in which emergency information is processed and the tools available to provide such information.     

The performance of wood and tile roofing assemblies exposed to continuous firebrand assault

The performance of tile roofing assemblies as well as untreated cedar shake roofing assemblies exposed to continuous firebrand showers were compared. Specifically, experiments were conducted for two types of concrete tile roofing assemblies (flat and profiled), one type of terracotta tile roofing assembly (flat) and an untreated (without any fire retardant) cedar shake roofing assembly. The design of the roofing assemblies was based on construction guidelines in the USA. The duration of the firebrand flux was fixed at 20 min, and the wind speed was varied from 6 m/s to 9 m/s. These wind speeds were chosen to be able to compare roofing assembly performance to similar assemblies exposed to a batch‐feed firebrand generator which had limited duration of firebrand exposure (6 min). The average firebrand mass flux that arrived at the surface of the roofing assemblies was 0.3 g/m²s Results indicated that for the untreated cedar shake assemblies, ignition occurred easily from the firebrand assault, and this type of roofing assembly generated their own firebrands after ignition. To attempt to quantify the degree of penetration, the number of firebrands that penetrated the tile roofing assemblies, and deposited onto the underlayment/counter‐batten system was counted as function of wind speed for each assembly. Firebrand penetration was observed, even for the flat tile assemblies. It is believed that these are the first‐ever experiments described in the peer‐reviewed literature to expose wood and tile roofing experiments to continuous wind‐driven firebrand showers. Copyright © 2016 John Wiley & Sons, Ltd.     

Understanding structure ignition vulnerabilities using mock‐up sections of attached wood fencing assemblies

Firebrand production from structure combustion becomes a key factor in the magnitude of how quickly a large outdoor fire may spread. Post‐fire disaster investigations suggest that attached building components, such as wood fencing assemblies are known to be prone to ignition in these fires, and may provide pathways to structure ignition. Here, a comparison of ignition results from full‐scale fencing assembly experiments conducted using a full‐scale wind tunnel facility, to mock‐ups of full‐scale fencing assemblies using the recently developed experimental capability at the National Research Institute of Fire and Disaster (NRIFD) are discussed. In both experimental facilities, the fencing assemblies were exposed to firebrand showers using custom built continuous feed firebrand generators with size and mass distributions similar to those generated from structure combustion. Similar ignition behaviors were observed between the full‐scale fencing assemblies and the mock‐up of full‐scale fencing assemblies. Additional experiments are required for other fencing assembly types to further verify these important findings.     

Experimental investigation of structure vulnerabilities to firebrand showers

Attempting to experimentally quantify the vulnerabilities of structures to ignition from firebrand showers has remained elusive. The coupling of two facilities has begun to unravel this difficult problem. The NIST Firebrand Generator (NIST Dragon) is an experimental device that can generate a firebrand shower in a safe and repeatable fashion. Since wind plays a critical role in the spread of WUI fires in the USA and urban fires in Japan, NIST has established collaboration with the Building Research Institute (BRI) in Japan. BRI maintains one of the only full scale wind tunnel facilities in the world designed specifically for fire experimentation; the Fire Research Wind Tunnel Facility (FRWTF). The present investigation is aimed at extensively quantifying firebrand penetration through building vents using full scale tests. A structure was placed inside the FRWTF and firebrand showers were directed at the structure using the NIST Dragon. The structure was fitted with a generic building vent, consisting of only a frame fitted with a metal mesh. Six different mesh sizes openings were used for testing. Behind the mesh, four different materials were placed to ascertain whether the firebrands that were able to penetrate the building mesh assembly could ignite these materials. Reduced scale test methods afford the capability to test new vent technologies and may serve as the basis for new standard testing methodologies. As a result, a new experimental facility developed at NIST is presented and is known as the NIST Dragon's LAIR (Lofting and Ignition Research). The NIST Dragon's LAIR has been developed to simulate a wind driven firebrand attack at reduced scale. The facility consists of a reduced scale Firebrand Generator (Baby Dragon) coupled to a bench scale wind tunnel. Finally, a series of full scale experiments were conducted to visualize the flow of firebrands around obstacles placed downstream of the NIST Dragon. Firebrands were observed to accumulate in front of these obstacles at a stagnation plane, as was observed when the structure was used for firebrand penetration through building vent experiments, due to flow recirculation. The accumulation of firebrands at a stagnation plane presents a severe threat to ignitable materials placed near structures.     

Developmental ability of cloned embryos from neural stem cells

The success rate is generally higher when cloning mice from embryonic stem (ES) cell nuclei than from somatic cell nuclei, suggesting that the embryonic nature or the undifferentiated state of the donor cell increases cloning efficiency. We assessed the developmental ability of cloned embryos derived from cultured neural stem cell (NSC) nuclei and compared the success rate with that of embryos cloned from other donor cells such as differentiated NSCs, cumulus cells, Sertoli cells and ES cells in the mouse. The transfer of two-cell cloned embryos derived from cultured NSC nuclei into surrogate mothers produced five live cloned mice. However, the success rate (0.5%) was higher in embryos cloned from cultured NSC nuclei than from differentiated NSCs (0%), but lower than that obtained by cloning mice from other cell nuclei (2.2-3.5%). Although the in vitro developmental potential to the two-cell stage of the cloned embryos derived from NSC nuclei (73%) was similar to that of the cloned embryos derived from other somatic cell nuclei (e.g., 85% in Sertoli cells and 75% in cumulus cells), the developmental rate to the morula-blastocyst stage was only 7%. This rate is remarkably lower than that produced from other somatic cells (e.g., 50% in Sertoli cells and 54% in cumulus cells). These results indicate that the undifferentiated state of neural cells does not enhance the cloning efficiency in mice and that the arrest point for in vitro development of cloned embryos depends on the donor cell type.