The use of natural (Pinus pinaster) resin in the production of printing ink and the printability effect

Alkyd resins are generally used in the production of printing inks. All industries look for alternative raw materials in the production of ink with the growing inclination toward using natural products. Resins forming the vehicle of the ink to be obtained from natural resources will provide benefits for the environment, nature, and living creatures. The aim of the study was to promote the use of natural resin in the ink system. Natural Pinus pinaster resin was added into vegetable and mineral oil-based solvents in pure form with alkyd resin in different amounts and ink varnishes of different combinations were prepared. Then, printing inks were produced from these varnishes in pure and hybrid form. Following the assessment of the rheological properties of the inks prepared, printing tests were conducted to assess the printing quality parameters. Ideal mixing ratios of the natural resins in the ink were determined for printability. The environmental importance and advantages of the use of natural resins were discussed. Recommendations were given in line with the results to encourage widespread use of natural resins in near future.     

Evaluation of antioxidant level and protein oxidation of rainbow trout (Oncorhynchus mykiss) fillets during rigor and post-rigor

In this study, the relationship between stunning techniques and protein oxidation which are accepted as the main cause of food spoilage was investigated. For this purpose, the antioxidant status, in vivo myofibrillary protein (MP) oxidation and sensitivity, and postmortem oxidation (inducted with hydroxyl radical system) of rainbow trout (Oncorhynchus mykiss) fillets killed by hitting to head (T1), neck crushing (T2), and convulsion (T3) methods, were investigated. Statistically significant differences (p < .05) were found among all parameters examined and it was observed that the most stressing technique was the convulsion method. It was determined that in protein profiles myosin were influenced too much from stunning technique and in actin observed oxidation-induced reductions. Reductions in S-S and S-H were also found to be increased in carbonyl concentrations, but the most effective values in both processes were determined by the convulsive technique. Our results show that short-term stunning techniques (hitting to head, neck crushing) give better meat quality results in terms of O. mykiss welfare and low MP oxidation rates. In general, we can say that T3 group fillets are more sensitive to oxidative damage, while T1 and T2 groups give better results in maintaining meat quality with low MP oxidation rates.     

Effect of flexure induced transverse crack and self-healing on chloride diffusivity of reinforced mortar

Cracks in reinforced concrete are unavoidable. Durability is of increasing concern in the concrete industry, and it is significantly affected by the presence of cracks. The corrosion of reinforcing steel due to chloride ions in deicing salts or sea-water is a major cause of premature deterioration of reinforced concrete structures. Although, it is generally recognized that cracks accelerate the ingress of chlorides in concrete, a lack of consensus on this subject does not yet allow reliable quantification of their effects. The present work studies the relationship between crack widths and chloride diffusivity. Flexural load was introduced to generate cracks of width ranging between 29 and 390 μm. As crack width was increased, the effective diffusion coefficient was also increased, thus reducing the initiation period of corrosion process. For cracks with widths less than 135 μm, the effect of crack widths on the effective diffusion coefficient of mortar was found to be marginal, whereas for crack widths higher than 135 μm the effective diffusion coefficient increased rapidly. Therefore, the effect of crack width on chloride penetration was more pronounced when the crack width is higher than 135 μm. Results also indicate that the relation between the effective diffusion coefficient and crack width was found to be power function. In addition, a significant amount of self-healing was observed within the cracks with width below 50 μm subjected to NaCl solution exposure. The present research may provide insight into developing design criteria for a durable concrete and in predicting service life of a concrete structures.     

3D Hair sketching for real-time dynamic & key frame animations

Physically based simulation of human hair is a well studied and well known problem. But the “pure” physically based representation of hair (and other animation elements) is not the only concern of the animators, who want to “control” the creation and animation phases of the content. This paper describes a sketch-based tool, with which a user can both create hair models with different styling parameters and produce animations of these created hair models using physically and key frame-based techniques. The model creation and animation production tasks are all performed with direct manipulation techniques in real-time.