Floating-patch MEMS antennas on HRS substrate for millimetre-wave applications

Novel floating-patch micro-electro-mechanical system (MEMS) antennas are proposed for millimetre-wave applications. The floating-patch MEMS antennas are fabricated on a high resistivity silicon (HRS) substrate using surface micromachining technology. Simulation and experimental results for reflection coefficients and radiation patterns are presented.     

Geometric origin of pair production by electric field in de sitter space

Particle production in de Sitter space provides an interesting model for understanding the curvature effect on Schwinger pair production by a constant electric field or the Schwinger mechanism on de Sitter radiation. For that purpose, we employ the recently introduced complex analysis method in which the quantum evolution in complex time explains pair production via the geometric transition amplitude and gives the pair-production rate as a contour integral. We compare the result from the contour integral with that of the phase-integral method.     

Solid extraction of caffeine and theophylline from green tea by molecular imprinted polymers

This paper involves a feasibility study on using molecular imprinted polymers as the sorbent materials in solid phase extraction for caffeine and theophylline from green tea. Two kinds of MIPs, with caffeine-theophylline mixture and pentoxifylline-theophylline mixture as the templates respectively, MAA as the monomer, EDMA as the crosslinker and ATBN as the initiator, were applied to this purpose. Mixture solution of caffeine and theophylline (1 Μg/ ml in acetonitrile) was applied to the solid extraction cartridges following a load, wash and elute procedure with acetonitrile, methanol, methanol-acetic acid (90/10, v/v) as the solvents, respectively. This solid phase extraction protocol was applied for extraction of caffeine and theophylline from green tea. Comparison between the results obtained with the MIPs cartridges and a traditional C₁₈ reversed-phase cartridge was made. It showed that the MIP-based sorbent on the solid phase extraction was comparable with that of C₁₈ material. HPLC analysis using a C₁₈ column (5 Μm, 250× 4.6 mm from Rstech corporation), methanol: water (60 :40, v/v) as the mobile phase at a flow rate of 0.6 ml/min was applied for the quantitative determination.     

An elastic-plastic finite element alternating method for analyzing wide-spread fatigue damage in aircraft structures

In this paper, a new analytical technique to study the effect of wide-spread fatigue damage in ductile panels is presented. The main purpose of the study is to develop an efficient methodology to predict the maximum load carrying capacity of panels with cracks. The problem arises especially in the fuselage skin of aging airplanes, in which cracks initiate from a row of rivet holes. This problem is known as Multi Site Damage (MSD) in aging aircraft. It is very important to estimate the load carrying capacity. Usually, the approach based on elastic fracture mechanics may overestimate the load capacity. It is very important for the aircraft structure with MSD to estimate the load carrying capacity of such damaged structures. Approaches based on elastic fracture mechanics often lead to a considerable error. In this paper, the Elastic Finite Element Alternating Method (EFEAM) has been extended to the case of elastic-plastic fracture of panels with MSD cracks. In EFEAM, analytical solutions to crack problems in an infinite plate are employed. In this study, we adopted an analytical solution for a row of cracks in an infinite panel. Furthermore, the plastic deformation is accounted for, by using the initial stress algorithm. The T _inf ^sup* integral is employed for the fracture criterion. The methodology developed in the present study can be called as Elastic-Plastic Finite Element Alternating Method (EPFEAM) for MSD problems. A series of studies on the maximum load capacity of panels with a row of cracks has been conducted.The support of this work by the Federal Aviation Administration through a grant to the Center of Excellence for Computational Modeling of Aircraft Structures, at the Georgia Institute of Technology, is sincerely appreciated.     

A Study on the Pd/a-Si/Ni Seed Layer for Metal-Induced Lateral Crystallization and Poly-Si TFTs

The effect of Pd on the growth rate of metal-induced lateral crystallization (MILC) from Ni seed and the electrical properties of thin-film transistors (TFTs) fabricated on the films crystallized by MILC were investigated. When the Pd metal is placed on the amorphous-silicon/Ni-seed layer, the MILC growth rate is two to three times faster than that of conventional Ni-MILC, without any degradation of TFTs. These results were explained by a stress that is generated by the formation of Pd₂Si     

Leak behavior of SCC degraded steam generator tubings of nuclear power plant

A forced outage due to a steam generator tube leak in a Korean nuclear power plant has been reported [Kim, J.S., Hwang, S.S., et al., 1999. KAERI Internal Report (Korean). Destructive analysis on pulled tubes from Ulchin unit 1. Korea Atomic Energy Research Institute]. Primary water stress corrosion cracking has occurred in many tubes in the plant, and they were repaired using sleeves or plugs. In order to develop proper repair criteria, it is necessary to understand the leak behavior of the tubes containing stress corrosion cracks. Cracked specimens were prepared using a room temperature cracking technique, and the leak rates and burst pressures of the degraded tubes were determined both at room temperature and at a high temperature. Some tubes with 100% through wall cracks did not show a leakage at 10.8 MPa, which is the typical pressure difference of the pressurized water reactors (PWRs) during a normal operation. In some tests, the leak rates of the tubes increased with time at a constant pressure. In a high temperature pressure test at 282 °C one specimen showed a very small leakage at 18.6 MPa, which stopped after a small increase in the test pressure. Because stress corrosion cracks can develop at relatively low stresses, even 100% through wall cracks can be so tight that they will not leak at a normal operating pressure.     

The Protective Effect of Zebularine,an Inhibitor of DNA Methyltransferase,on Renal Tubulointerstitial Inflammation and Fibrosis

Renal fibrosis, the final pathway of chronic kidney disease, is caused by genetic and epigenetic mechanisms. Although DNA methylation has drawn attention as a developing mechanism of renal fibrosis, its contribution to renal fibrosis has not been clarified. To address this issue, the effect of zebularine, a DNA methyltransferase inhibitor, on renal inflammation and fibrosis in the murine unilateral ureteral obstruction (UUO) model was analyzed. Zebularine significantly attenuated renal tubulointerstitial fibrosis and inflammation. Zebularine decreased trichrome, α-smooth muscle actin, collagen IV, and transforming growth factor-β1 staining by 56.2%. 21.3%, 30.3%, and 29.9%, respectively, at 3 days, and by 54.6%, 41.9%, 45.9%, and 61.7%, respectively, at 7 days after UUO. Zebularine downregulated mRNA expression levels of matrix metalloproteinase (MMP)-2, MMP-9, fibronectin, and Snail1 by 48.6%. 71.4%, 31.8%, and 42.4%, respectively, at 7 days after UUO. Zebularine also suppressed the activation of nuclear factor-κB (NF-κB) and the expression of pro-inflammatory cytokines, including tumor necrosis factor-α, interleukin (IL)-1β, and IL-6, by 69.8%, 74.9%, and 69.6%, respectively, in obstructed kidneys. Furthermore, inhibiting DNA methyltransferase buttressed the nuclear expression of nuclear factor (erythroid-derived 2)-like factor 2, which upregulated downstream effectors such as catalase (1.838-fold increase at 7 days, p < 0.01), superoxide dismutase 1 (1.494-fold increase at 7 days, p < 0.05), and NAD(P)H: quinone oxidoreduate-1 (1.376-fold increase at 7 days, p < 0.05) in obstructed kidneys. Collectively, these findings suggest that inhibiting DNA methylation restores the disrupted balance between pro-inflammatory and anti-inflammatory pathways to alleviate renal inflammation and fibrosis. Therefore, these results highlight the possibility of DNA methyltransferases as therapeutic targets for treating renal inflammation and fibrosis.     

Advanced compensation technologies for large‐sized UHD OLED TVs

In this paper, we present novel organic light‐emitting diode (OLED) display panel compensation technologies for large‐sized ultra‐high‐definition OLED TVs considering variations of threshold voltage, mobility, channel size, OLED efficiency, and OLED uniformity. Using these technologies, we have successfully launched 55‐, 65‐ and 77‐in. ultra‐high‐definition OLED TVs.     

Microstructural analysis of multilayered titanium aluminide sheets fabricated by hot rolling and heat treatment

This study is concerned with the microstructural analysis of multilayered or bulk Ti aluminide sheets fabricated by the self-propagating high-temperature synthesis (SHS) reaction using hot rolling and heat treatment. Multilayered Ti/Al sheets were prepared by stacking thin Ti and Al sheets alternately, and a good Ti/Al interfacial bonding was achieved after rolling at 500 °C. When these sheets were held at 1000 °C, spheroidal TiAl₃ phases were formed by the SHS reaction at Ti/Al interfaces and inside Al layers. Microstructural analysis on the hot-rolled, multilayered Ti/TiAl₃ sheets revealed that intermetallic phases such as TiAl₂, TiAl, and Ti₃Al were formed at Ti/TiAl₃ interfaces due to interaction between Ti and TiAl₃ and that pores formed in the TiAl₃ layer were significantly reduced during hot rolling. When multilayered Ti/Ti aluminide sheets were heat treated at 1000 °C, Ti₃Al, TiAl, and TiAl₂ were grown as Ti and TiAl₃ were consumed. As the heat treatment proceeded, TiAl grew further, eventually leading to the fabrication of multilayered sheets composed of Ti₃Al and TiAl. Bulk Ti aluminide sheets, having a lamellar structure of Ti₃Al and TiAl, instead of multilayered sheets, were also fabricated successfully by heat treatment at 1400 °C. This fabrication method of the bulk sheets had several advantages over the method by hot forging or rolling of conventional cast Ti aluminides. From these findings, an idea to fabricate multilayered or bulk Ti aluminide sheets by hot rolling and heat treatment is suggested as an economical and continuous fabrication method, and the formation and growth mechanisms of interfacial phases are elucidated in this study.     

A robust loop-closure method for visual SLAM in unstructured seafloor environments

This paper addresses the problem of visual simultaneous localization and mapping (SLAM) in an unstructured seabed environment that can be applied to an unmanned underwater vehicle equipped with a single monocular camera as the main measurement sensor. Monocular vision is regarded as an efficient sensing option in the context of SLAM, however it poses a variety of challenges when the relative motion is determined by matching a pair of images in the case of in-water visual SLAM. Among the various challenges, this research focuses on the problem of loop-closure which is one of the most important issues in SLAM. This study proposes a robust loop-closure algorithm in order to improve operational performance in terms of both navigation and mapping by efficiently reconstructing image matching constraints. To demonstrate and evaluate the effectiveness of the proposed loop-closure method, experimental datasets obtained in underwater environments are used, and the validity of the algorithm is confirmed by a series of comparative results.