Thermal prehistory,structure and high-temperature thermodynamic properties of Y2O3-CeO2 and Y2O3-ZrO2-CeO2 solid solutions

Ceria-based solid solutions are important materials for high- and medium-temperature electrochemical applications. However, the stabilities of both binary and ternary ceria-based solid solutions are insufficient at elevated temperatures, which limits their application as solid electrolytes or SOFC cathodes. Data on the high-temperature stability of ceria-based ceramics are unavailable in the literature. In the present study, we report a thermodynamic stability investigation of Y₂O₃-CeO₂ and Y₂O₃-ZrO₂-CeO₂ solid solutions. The thermal prehistories of binary and ternary systems were investigated using STA, XRD, and ESCA techniques. The vaporization processes were investigated in the temperature range of 1577–2227°С via the Knudsen effusion mass spectrometry technique. Using data on the component activity in solid-phase thermodynamic properties of Y₂O₃-CeO₂ solid solutions, which is represented as the Gibbs energy, the excess Gibbs energy was calculated as a function of the ceria mol. %. It was shown that the reduction of Ce⁴⁺ to Ce³⁺ in Y₂O₃-CeO₂ and Y₂O₃-ZrO₂-CeO₂ solid solutions corresponds to less-negative Gibbs energy compared to ZrO₂-CeO₂ solid solutions.     

A novel ceramic matrix composite based on YNbO4–TiO2 for microwave applications

This work presents the dielectric properties of YNbO₄ (YNO)–TiO₂ composites in the microwave range. X-ray diffraction analysis demonstrates that the addition of TiO₂ to YNO results in the formation of a Y(Nb_0.5Ti_0.5)₂O₆ phase. In the microwave range, the values of permittivity and dielectric loss did not present major changes with the increment of TiO₂. Moreover, the addition of TiO₂ results in an improvement in the thermal stability of YNO, with YNO63 demonstrating a resonant frequency of ?8.96 ppm.°C^?1. We utilised numerical simulations to evaluate the behaviour of these materials as dielectric resonator antennae and it is found that they exhibit a reflection coefficient below ?10 dB at the resonant frequency, with a realised gain of 4.94 – 5.76 dBi, a bandwidth of 665–1050 MHz and a radiation efficiency above 84%. Our results indicate that YNO–TiO₂ composites are interesting candidates for microwave operating devices.     

On Application of Carbon-Containing Electrode Materials in Technology of Electrospark Alloying: Part 1. Peculiarities of Coating Formation Using Electrospark Treatment of Titanium Alloy OT4-1

Electrospark treatment of OT4-1 titanium alloy was performed sequentially with a STIM-20N hard-alloy electrode (TiC–20% Ni) and carbon-containing material (graphite and carbon-based composite materials). Kinetics of the mass transfer of the hard-alloy electrode was studied. The cathode mass loss during the first minute of the treatment was established. The kinetics results were processed using the methods of mathematical statistics. The erosion resistance of the applied carbon-containing materials was determined. Phase composition and relief of the coatings formed were analyzed. It was found that the application of the carbon-containing material increases the content of refractory phases in the coatings. Increase in the time of the treatment using the carbon-containing materials decreases the roughness of the coatings.     

The anisotropic effect of a weak magnetic field on the photoconductivity of C<Subscript>60</Subscript> single crystals

The effect of crystal orientation on the photogeneration of free charge carriers was studied for C₆₀ single crystals in a weak magnetic field. The photoconductivity sharply depends on the orientation of magnetic field with respect to the crystallographic directions, showing a 5–8% increase for seven axes of the C₆₀ crystal.     

Tribotronics—Towards active tribology

A constant trend towards more compact mechanical systems with higher power densities and increased thermo-mechanical loads emphasises the importance of the development of new design approaches and novel tribological systems. Ignoring this may cause a significant slow down in technological and industrial development. Tribotronics or active tribology based on adaptive performance is thought of as being critical in the implementation of smart machine concepts. Recognition of the importance of tribotronics, or active control of system loss outputs, such as those through friction and wear will have significant beneficial economic consequences as a result of the associated accelerated rate of technological progress. These smart tribotronic systems can be embedded in a great variety of machines and mechanisms. If this integration is made at the design stage, products that are more flexible, efficient and reliable can be produced. The concept of tribotronics is presented and discussed in this paper. Some illustrative examples that show the feasibility of an “active” approach are given. In addition, various possibilities already reported in literature are discussed.     

Flux Jumps and H-T Diagram of Instability for MgB2

We present a study of magneto-thermal instabilities in polycrystalline MgB₂ superconductor, by magnetic hysteresis loop measurements and by investigations of magnetic flux dynamics with a miniature Hall probe. Temperature and magnetic field ranges where the flux jumps may be observed have been determined. On the basis of measurements of the magnetic flux dynamics, an average magnetic diffusivity describing the process of the flux jump is estimated. This parameter is compared with the thermal and magnetic diffusivities calculated on the basis of available data for thermal conductivity, heat capacity and resistivity. It is shown that the estimated value of the field of the first flux jump is influenced significantly by the field dependence of specific heat. In order to explain the observed phenomenon, the temperature reached by the sample during the flux jump at different magnetic fields is calculated.     

Text planning with opportunistic control

This report describes the current state of our central research thrust in the area of natural language generation. We have already reported on our text-level theory of lexical selection in natural language generation ([59, 60]), on a unification-based syntactic processor for syntactic generation ([73]) and designed a relatively flexible blackboard-oriented architecture for integrating these and other types of processing activities in generation ([60]). We have implemented these ideas in our prototype generator, Diogenes — a DIstributed, Opportunistic GENEration System — and tested our lexical selection and syntactic generation modules in a comprehensive natural language processing project — the KBMT-89 machine translation system ([15]). At this stage we are developing a more comprehensive Diogenes system, concentrating on both the theoretical and the system-building aspects of a) formulating a more comprehensive theory of distributed natural language generation; b) extending current theories of text organization as they pertain to the task of planning natural language texts; c) improving and extending the knowledge representation and the actual body of background knowledge (both domain and discourse/pragmatic) required for comprehensive text planning; d) designing and implementing algorithms for dynamic realization of text structure and integrating them into the blackboard style of communication and control; e) designing and implementing control algorithms for distributed text planning and realization. In this document we describe our ideas concerning opportunistic control for a natural language generation planner and present a research and development plan for the Diogenes project.Many people have contributed to the design and development of the Diogenes generation system over the last four years, especially Eric Nyberg, Rita McCardell, Donna Gates, Christine Defrise, John Leavitt, Scott Huffman, Ed Kenschaft and Philip Werner. Eric Nyberg and Masaru Tomita have created genkit, which is used as the syntactic component of Diogenes. A short version of this article appeared in Proceedings of IJCAI-89, co-authored with Victor Lesser and Eric Nyberg. To all the above many thanks. The remaining errors are the responsibility of this author.     

Contact melting inside an elastic capsule

An approximate mathematical model of contact melting of an unfixed material in elastic cylindrical and spherical capsules is developed. Since the density of the solid is higher than that of the melt, the melting solid resides at the bottom supported by a thin layer of the generated, convecting, melt, and the capsule swells. The main characteristic scales and non-dimensional parameters, which describe the principal features of the melting process and the liquid flow, are found. Linearisation with regard to the Stefan number as well as the small difference between the densities of the solid and liquid enables us to derive a closed-form evolution equation for the motion of the solid, which also determines the melting rate. Numerical solution of the evolution equation shows that the swelling of the capsule during melting, which is caused by the decrease of the density during phase transition, leads to slowing down of the melting process. This effect is due to flattening of the lower surface of the capsule, which entails fall of the pressure along with thickening of the molten layer. The latter determines the decrease of the melting rate.     

Phase equilibrium in solutions of star-shaped macromolecules: an improved Okada-Numasawa model

The two-region Okada-Numasawa model for solutions of star-shaped polymers has been improved by means of a change in the integration order and introduction of a concentration-dependent and molar-mass-dependent Flory-Huggins interaction parameter (the second and third approximations of the Flory-Huggins theory). To overcome calculation difficulties, a special algorithm for computing coexistence curves of polymeric systems with an UCST has been used. The agreement between the experimental and calculated coexistence curves for the star-shaped polystyrene (PS)-cyclohexane system has been improved: the difference between T_cs is ∼0.33 K against ∼12 K as given by the original model.