A novel ceramic matrix composite based on YNbO4–TiO2 for microwave applications

This work presents the dielectric properties of YNbO₄ (YNO)–TiO₂ composites in the microwave range. X-ray diffraction analysis demonstrates that the addition of TiO₂ to YNO results in the formation of a Y(Nb_0.5Ti_0.5)₂O₆ phase. In the microwave range, the values of permittivity and dielectric loss did not present major changes with the increment of TiO₂. Moreover, the addition of TiO₂ results in an improvement in the thermal stability of YNO, with YNO63 demonstrating a resonant frequency of ?8.96 ppm.°C^?1. We utilised numerical simulations to evaluate the behaviour of these materials as dielectric resonator antennae and it is found that they exhibit a reflection coefficient below ?10 dB at the resonant frequency, with a realised gain of 4.94 – 5.76 dBi, a bandwidth of 665–1050 MHz and a radiation efficiency above 84%. Our results indicate that YNO–TiO₂ composites are interesting candidates for microwave operating devices.     

Effect of pulse time gate on CsI(T1) light output

The mass and charge identification of secondary particles with Z < 4 by a large CsI(T1) scintillation detector is performed using pulse shape analysis and time-of-flight methods. The dependence of the light output on E, A and Z is studied in the energy range of 1–20 MeV/A and special attention is paid to the integration time of the photomultiplier anode signal. It is found that the behaviour of the calibration curves strongly depends on the choice of the integration time interval.     

Tribotronics—Towards active tribology

A constant trend towards more compact mechanical systems with higher power densities and increased thermo-mechanical loads emphasises the importance of the development of new design approaches and novel tribological systems. Ignoring this may cause a significant slow down in technological and industrial development. Tribotronics or active tribology based on adaptive performance is thought of as being critical in the implementation of smart machine concepts. Recognition of the importance of tribotronics, or active control of system loss outputs, such as those through friction and wear will have significant beneficial economic consequences as a result of the associated accelerated rate of technological progress. These smart tribotronic systems can be embedded in a great variety of machines and mechanisms. If this integration is made at the design stage, products that are more flexible, efficient and reliable can be produced. The concept of tribotronics is presented and discussed in this paper. Some illustrative examples that show the feasibility of an “active” approach are given. In addition, various possibilities already reported in literature are discussed.     

High-power 1.7–1.8 μm single-mode laser diodes

Separate confinement InGaAsP/InP laser heterostructures were grown by metalorganic-hydride vapor-phase epitaxy. High-power single-mode laser diodes of mesastripe design based on these heterostructures operate in a wavelength interval of 1.7–1.8 μm with a maximum continuous room temperature output power of 150 mW. The single-mode lasing regime is maintained up to an output power level of 100 mW.     

Simulation of contact stresses and forces during hot rolling of thin wide strips with allowance for a stick zone and elastic regions in the deformation zone

A new procedure for the calculation of contact stresses and hot-rolling forces for wide strips 0.8–1.5 mm thick has been developed and tested. This procedure takes into account the presence of a stick zone in the deformation zone and stress distributions in both elastic and plastic regions in the deformation zone. The average error in the force calculation according to the new procedure is 5%, which is more than two times smaller than the calculation error of well-known force calculation procedures. The developed procedure is used to simulate the contact stresses in the deformation zones of working stands in a six-stand 1700 mill during rolling of strips thinner than 1.0 mm. A number of new relations for the state of stress in a strip have been revealed upon simulation. Some of these relations are as follows: in the last stands, the length of elastic regions accounts for 10–17% of the total deformation-zone length; the maximum normal contact stresses are 1300–1400 MPa, which corresponds to the stresses in the deformation zones of cold-rolling mills; the stick-zone length accounts for 85–99% of the deformation-zone length; and the contact stresses in the stick zone are virtually independent of the friction coefficient. The developed calculation procedure can be used to optimize the technological regimes of wide-strip mills.     

Nonstationary processes in a controlled electric drive with a high-voltage frequency converter intended for a mainline pump of a heat-supply station

Results of the studies of nonstationary electromagnetic and electromechanical processes that develop during the start-up (restart) of a frequency-controlled electric drive of a mainline pump as result of perturbation in the electric supply system are presented.     

Formation of copper lines on dielectric substrates by the thermotensography method

It has been shown that the thermotensographic process in the layer of a copper dibromide solution in ethanol followed by catalytic reduction of copper in a hydrogen current at 450°C can be used to obtain conducting lines. It has been established that in an open liquid layer lines of isolated small crystals of copper are formed, and in a layer of a closed volume lines of intergrown small crystals are formed due to the evaporation-convective intensification of the image. In the first case, the lines do not conduct electric current, and in the second one their specific resistance is 4·10³ times higher than in monolithic copper. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 80, No. 2, pp. 186–192, March–April, 2007.     

Flux Jumps and H-T Diagram of Instability for MgB2

We present a study of magneto-thermal instabilities in polycrystalline MgB₂ superconductor, by magnetic hysteresis loop measurements and by investigations of magnetic flux dynamics with a miniature Hall probe. Temperature and magnetic field ranges where the flux jumps may be observed have been determined. On the basis of measurements of the magnetic flux dynamics, an average magnetic diffusivity describing the process of the flux jump is estimated. This parameter is compared with the thermal and magnetic diffusivities calculated on the basis of available data for thermal conductivity, heat capacity and resistivity. It is shown that the estimated value of the field of the first flux jump is influenced significantly by the field dependence of specific heat. In order to explain the observed phenomenon, the temperature reached by the sample during the flux jump at different magnetic fields is calculated.     

Text planning with opportunistic control

This report describes the current state of our central research thrust in the area of natural language generation. We have already reported on our text-level theory of lexical selection in natural language generation ([59, 60]), on a unification-based syntactic processor for syntactic generation ([73]) and designed a relatively flexible blackboard-oriented architecture for integrating these and other types of processing activities in generation ([60]). We have implemented these ideas in our prototype generator, Diogenes — a DIstributed, Opportunistic GENEration System — and tested our lexical selection and syntactic generation modules in a comprehensive natural language processing project — the KBMT-89 machine translation system ([15]). At this stage we are developing a more comprehensive Diogenes system, concentrating on both the theoretical and the system-building aspects of a) formulating a more comprehensive theory of distributed natural language generation; b) extending current theories of text organization as they pertain to the task of planning natural language texts; c) improving and extending the knowledge representation and the actual body of background knowledge (both domain and discourse/pragmatic) required for comprehensive text planning; d) designing and implementing algorithms for dynamic realization of text structure and integrating them into the blackboard style of communication and control; e) designing and implementing control algorithms for distributed text planning and realization. In this document we describe our ideas concerning opportunistic control for a natural language generation planner and present a research and development plan for the Diogenes project.Many people have contributed to the design and development of the Diogenes generation system over the last four years, especially Eric Nyberg, Rita McCardell, Donna Gates, Christine Defrise, John Leavitt, Scott Huffman, Ed Kenschaft and Philip Werner. Eric Nyberg and Masaru Tomita have created genkit, which is used as the syntactic component of Diogenes. A short version of this article appeared in Proceedings of IJCAI-89, co-authored with Victor Lesser and Eric Nyberg. To all the above many thanks. The remaining errors are the responsibility of this author.     

Hepatic and pancreatic effects of polyenoylphosphatidylcholine in rats with alloxan-induced diabetes

In neonatally allylestrenol treated animals in adult age a single benzpyrene treatment significantly decreases the female and significantly increases the male rat's sexual activity. Three month old females display the negative sexual behavioral effect of neonatal allylestrenol treatment less than the six month old ones. The benzpyrene treatment in adult age decreases the sexual activity of male rats. The experiments call the attention to the modifying effect of perinatal steroid treatments to similar exposure in adult age.