Microcalorimetry for characterization of film formation and cure of coatings and adhesives

A new microcalorimeter with eight parallel channels using robust, low cost sensors for characterization of coatings and adhesives is described and first experiments on coatings and adhesives are presented. The calorimetric sensors are based on thin glass plates (20 mm × 20 mm, thickness 150 μm) with heater and thermocouple sputtered on the surfaces (calorimetric active area of about 9 mm²). The setup allows heating and cooling experiments as well as isothermal measurements in the temperature-modulated mode with up to eight sensors in parallel. The measured quantities are the real (C^′_p) and imaginary part (C^″_p) of the complex heat capacity (), the related absolute value of the heat capacity () and the heat flow . An industrial computer (NI PXI system) with specific software for calibration and data recording controls the electronic components. Sensors can be embedded in a temperature controlled oven (heating and cooling by Peltier elements) or alternatively in a climatic cabinet with controlled temperature and humidity.

The method has been applied successfully to monitoring of film formation of aqueous polymer dispersions (styrene-acrylate copolymer) and curing of coatings.     

Three-Dimensional Solution and Experimental Confirmation for the Electric Resistivity Testing of Surface-Breaking Defects in Green-State Powder Metallurgy Compacts

This paper investigates electrostatic voltage distributions around a surface-breaking flaw due to an injected current of known strength. The direct 3-D solution of the voltage behavior over the flawed surface is obtained numerically by the use of a boundary integral formulation. A novel iteration method is applied to solve the resulting electrostatic integral equation for the unknown surface voltage distribution. In addition to investigating the sensitivity of different flaw sizes to the observed surface voltage distribution, important issues such as suitable probe spacing and current flow orientation are studied. For sufficiently small surface-breaking flaws, a simple image source model is developed to evaluate the voltage response of hairline cracks. The model is tested by comparing it with the developed numerical solution. Experiments aimed at establishing the validity of the modeling approach show remarkable agreement with the theoretical model.     

Natural and Designed Toxins for Precise Therapy: Modern Approaches in Experimental Oncology

Cancer cells frequently overexpress specific surface receptors providing tumor growth and survival which can be used for precise therapy. Targeting cancer cell receptors with protein toxins is an attractive approach widely used in contemporary experimental oncology and preclinical studies. Methods of targeted delivery of toxins to cancer cells, different drug carriers based on nanosized materials (liposomes, nanoparticles, polymers), the most promising designed light-activated toxins, as well as mechanisms of the cytotoxic action of the main natural toxins used in modern experimental oncology, are discussed in this review. The prospects of the combined therapy of tumors based on multimodal nanostructures are also discussed.     

Pre-Senescence Induction in Hepatoma Cells Favors Hepatitis C Virus Replication and Can Be Used in Exploring Antiviral Potential of Histone Deacetylase Inhibitors

Recent evidence suggests that fibrotic liver injury in patients with chronic hepatitis C correlates with cellular senescence in damaged liver tissue. However, it is still unclear how senescence can affect replication of the hepatitis C virus (HCV). In this work, we report that an inhibitor of cyclin-dependent kinases 4/6, palbociclib, not only induced in hepatoma cells a pre-senescent cellular phenotype, including G1 arrest in the cell cycle, but also accelerated viral replicon multiplication. Importantly, suppression of HCV replication by direct acting antivirals (DAAs) was barely affected by pre-senescence induction, and vice versa, the antiviral activities of host-targeting agents (HTAs), such as inhibitors of human histone deacetylases (HDACi), produced a wide range of reactions—from a dramatic reduction to a noticeable increase. It is very likely that under conditions of the G1 arrest in the cell cycle, HDACi exhibit their actual antiviral potency, since their inherent anticancer activity that complicates the interpretation of test results is minimized.     

Finite-time coordination in multiagent systems using sliding mode control approach

Finite-time stability in dynamical systems theory involves systems whose trajectories converge to an equilibrium state in finite time. In this paper, we use the notion of finite-time stability to apply it to the problem of coordinated motion in multiagent systems. Specifically, we consider a group of agents described by fully actuated Euler–Lagrange dynamics along with a leader agent with an objective to reach and maintain a desired formation characterized by steady-state distances between the neighboring agents in finite time. We use graph theoretic notions to characterize communication topology in the network determined by the information flow directions and captured by the graph Laplacian matrix. Furthermore, using sliding mode control approach, we design decentralized control inputs for individual agents that use only data from the neighboring agents which directly communicate their state information to the current agent in order to drive the current agent to the desired steady state. Sliding mode control is known to drive the system states to the sliding surface in finite time. The key feature of our approach is in the design of non-smooth sliding surfaces such that, while on the sliding surface, the error states converge to the origin in finite time, thus ensuring finite-time coordination among the agents in the network. In addition, we discuss the case of switching communication topologies in multiagent systems. Finally, we show the efficacy of our theoretical results using an example of a multiagent system involving planar double integrator agents.     

Exploiting Batch Processing on Streaming Architectures to Solve 2D Elliptic Finite Element Problems: A Hybridized Discontinuous Galerkin (HDG) Case Study

Numerical methods for elliptic partial differential equations (PDEs) within both continuous and hybridized discontinuous Galerkin (HDG) frameworks share the same general structure: local (elemental) matrix generation followed by a global linear system assembly and solve. The lack of inter-element communication and easily parallelizable nature of the local matrix generation stage coupled with the parallelization techniques developed for the linear system solvers make a numerical scheme for elliptic PDEs a good candidate for implementation on streaming architectures such as modern graphical processing units (GPUs). We propose an algorithmic pipeline for mapping an elliptic finite element method to the GPU and perform a case study for a particular method within the HDG framework. This study provides comparison between CPU and GPU implementations of the method as well as highlights certain performance-crucial implementation details. The choice of the HDG method for the case study was dictated by the computationally-heavy local matrix generation stage as well as the reduced trace-based communication pattern, which together make the method amenable to the fine-grained parallelism of GPUs. We demonstrate that the HDG method is well-suited for GPU implementation, obtaining total speedups on the order of 30–35 times over a serial CPU implementation for moderately sized problems.     

DSGE Model Estimation on the Basis of Second-Order Approximation

This article compares the properties of different non-linear Kalman filters: the well-known Unscented Kalman filter (UKF), the central difference Kalman filter (CDKF) and the new Quadratic Kalman filter (QKF). A small financial DSGE model is repeatedly estimated by several quasi-likelihood methods with different filters for data generated by the model. Errors in parameters estimation are a measure of the filters’ quality. The result shows that the QKF has a reasonable advantage in terms of quality over the CDKF and the UKF, albeit with some loss in speed.     

氧分压对TiO2薄膜光学性能的影响

为得到光学性能良好、稳定的TiO2薄膜,采用离子束溅射的方法,改变氧分压,在k9玻璃上制备出不同结晶取向不同光学常数的TiO2薄膜.采用椭圆偏振光谱仪测试、拟合得到薄膜的厚度、折射率和消光系数.薄膜通过400℃退火,利用X射线衍射仪(XRD)对薄膜的成分、结晶和取向进行分析.实验结果发现,随氧分压增加折射率减低,当氧分压达到1.0×10-2Pa时,折射率在2.43附近,变化趋于稳定.氧分压对薄膜的消光系数k影响较大,氧分压高于1.0×10-2Pa时在可见光和近红外区薄膜消光系数近似为0.随氧分压降低,薄膜从(101)向(200)转变.在此氧分压下,得到的薄膜折射率稳定,消光系数相对较小.     

Synthesis of amphiphilic (meth)acrylates with oligo(ethylene glycol) and (or) oligo(propylene glycol) blocks by the esterification of (meth)acrylic acid

Thermoresponsive PEG-based (PEG stands polyethylene glycol) polymers are unique for use in medicine because of their low toxicity, good biocompatibility and biodegradability, but usually more hydrophobic and more toxic comonomers are used to adjust lower critical solution temperature (LCST). A convenient way to overcome this problem and to finely tune LCST is to use alkoxy oligo(ethylene glycol)- or alkoxy oligo(propylene glycol) (meth)acrylates as starting comonomers. Here we report on the conditions for the simple and affordable synthesis of methoxy oligo(propylene glycol) (meth)acrylate- and methoxy oligo(propylene glycol)-block-oligo(ethylene glycol) (meth)acrylate-based macromonomers with high yields (80%–98.7%) by the acid-catalyzed esterification of (meth)acrylic acid with alkoxy oligo(alkylene glycols) containing oligo(ethylene glycol) (OEG) and/or oligo(propylene glycol) (OPG) blocks. p-Toluene sulphonic acid (pTSA), alkyl(C₁₂–C₁₄)benzene sulfonic acid (ABSA) and H₂SO₄ were used as catalysts. It has been shown that pTSA and ABSA are practically the same in catalytic activity and are superior to sulfuric acid. The reaction orders with respect to catalyst was found to be close to 1 in all cases. It has been shown that the reaction is actually insensitive to the lengths of OEG and OPG blocks, as well as to the structure of the terminal alkyl group, while the esterification of acrylic acid (AA) proceeds much faster compared to methacrylic acid (MAA) one under the same conditions. The influence of temperature on the equilibrium conversions of alcohols was determined, which were found to be 89%–93% for the esterification of AA and 61%–86% for MAA in the temperature range of 60–120°C. A further increase in conversion was achieved by introducing an azeotropic agent (toluene), its optimal concentration was found to be 10%–15%.     

Investigation of the structure of supersonic nitrogen microjets

Results of research on microjets escaping into an ambient space from nozzles with diameters of 341–10.4 μm are described. A special Pitot microtube is used for studying the structure of supersonic microjets. The main feature of this microtube is a small diameter of the intake hole (12 μm). The main parameters of supersonic underexpanded microjets are identified, including the size of shock cells and the supersonic core length of the microjet. The results show a significant increase in the supersonic core length of microjets compared to macrojets. The Reynolds numbers of the laminar–turbulent transition in microjets are found to be in the range of 1,100–2,100. In addition, a classification of supersonic underexpanded axisymmetric microjets escaping into the ambient space is proposed.