A numerical study of radiation heat transfer in sodium pool combustion and response surface modeling of luminous flame emissivity

A response surface model of the luminous flame emissivity of sodium pool fire has been proposed for use in safety analysis computer codes of a liquid metal fast reactor. The liquid sodium burns in air resulting in not only heat generation but also release of sodium oxide aerosols of sub-micron diameters. Aerosols levitating in air are radiative and they influence the allocation of combustion heat from the flame to atmospheric gas or sodium pool. The emissivity of the flame needs to be quantified, as it is one of user-specified parameters of the computer codes for the sodium fire analysis. The response surface model of the flame emissivity is developed based on numerical experiments on the physics of mass and heat transfer and behavior of the aerosol. Thermal-hydraulic equations have been solved coupled with aerosol dynamics and chemical reaction. Three influential variables on the emissivity are identified as pool temperature, gas temperature and oxygen molar fraction in the air. It has been found that the emissivity is calculated reasonably as a function of the three variables. The proposed response surface model can be easily employed in the sodium fire analysis codes because it is a simple quadratic expression. For the safety evaluation of the sodium fire, combined use is recommended of the proposed model and the lumped-mass zone model code.     

Development of enhanced depth-resolution technique for shallow dopant profiles

A rapid shrinkage in the minimum feature size of integrated circuits requires analysis of dopants in their shallow source–drain and their extensions with an enhanced depth resolution. Rutherford backscattering spectroscopy (RBS) combining a medium-energy He ion beam with a detector of improved energy resolution should meet the requirement of a depth resolution better than 5 nm at a depth of 10–20 nm in the next 10 years. A toroidal electrostatic analyzer of 4×10⁻³ energy resolution has been used to detect the scattered ions of a medium-energy He ion beam. Five keV As⁺ implanted Si or SiO₂ samples were measured. Depth profiling results using the above technique are compared with those of glancing-angle RBS by MeV energy He ions. Limitations in the energy resolution due to various energy-spread contributions have been clarified.     

Solubility of amaranth seed proteins in sodium sulphate and sodium chloride: the main factor in quantitative extraction for analysis

Nitrogen was extracted more efficiently from amaranth seed with 0.04 M Na₂SO₄ (5% w/v) than with either 0.09 M or 0.17 M NaCl (5% or 10% w/v), despite both solutions having the same ionic strength (μ= 1). Solubility of saline soluble proteins (albumin ± globulin) was very poor in either water or 1M NaCl, but increased in 0.4M NaCl at alkaline pH between 7 and 10. Globulins were very soluble in 0.4M NaCl at a pH 9. Albumin was the main storage protein. Saline soluble proteins formed very weak gels.     

Synthesis and properties of Fe3C film by r.f. magnetron sputtering

Fe₃C film, which is a promising new magnetic recording material, can be synthesized by r.f. magnetron sputtering. Several graphite plates were attached to an iron plate to adjust the area of a composite target for the control of film composition. The crystalline phases in a film changed from Fe-C solid solution to Fe₃C with increasing substrate temperature from 350 °C and above. Sputtering at an argon pressure of 5 Pa was favourable for the formation of crystalline Fe₃C film. All Fe₃C films showed in-plane magnetization. The saturation magnetization of the film was around 100–120 e.m.u. g^–1 regardless of the deposition conditions. The coercivity of the films increased from 1 Oe to 250 Oe with increasing substrate temperature, and the coercivity remained constant at 250 Oe at 350 °C, regardless of argon pressure.     

Lichen sclerosus et atrophicus in a band-like arrangement

We report a case of lichen sclerosus et atrophicus (LSA) in a band-like arrangement. The patient had a white atrophic plaque on the left breast which showed the typical histological features of LSA. One month later, the patient had developed multiple, brown-colored plaques from the right breast to the right upper arm following the distribution of the peripheral nerve. These plaques showed the mild histological changes indicative of LSA. This band-like arrangement of LSA appears to be unique.     

Estimation of the functional reserve of the human liver by urinary D-glucaric acid excretion after vitamin C administration

Increased monoamine metabolism in experimental herpes simplex virus (HSV) encephalitis is well established. Both serotonin (5-HT) and dopamine (DA) systems are affected. HSV invades the raphe nuclei after its entry into the brain stem. However, no studies have been published concerning influences of HSV on the neurotransmitters in the raphe. In the present study, concentrations of 5-HT and DA and their metabolites in the raphe nuclei and related brain regions in rabbits with fulminant HSV encephalitis have been analyzed using high-pressure liquid chromatography. Encephalitis was induced by corneal inoculation with HSV. Homovanillic acid (HVA) and dihydroxyphenyl acetic acid (DOPAC) concentrations and HVA/DA ratios were increased in the raphe nuclei suggesting increased DA turnover. The most substantial changes were bilaterally decreased 5-HT and 5-hydroxyindoleacetic acid (5-HIAA) concentrations in the raphe nuclei. The decrease in the raphe 5-HT was reflected also to the projection areas in the hemispheres, where 5-HT concentrations were lower in HSV-inoculated rabbits than in controls. The changes strongly suggest a direct influence of HSV on serotoninergic neurons. Since the ventral parts of the limbic system have rich serotoninergic afferents from the raphe, this also suggests that HSV may reach hemispheres in HSV encephalitis from the brain stem via the ascending serotoninergic system.     

Immunohistochemical profile of basic fibroblast growth factor and heparan sulphate in adult rat mandibular condylar cartilage

Basic fibroblast growth factor (bFGF) and heparan sulphate (HS) were detected immunohistochemically in mandibular condylar cartilage, and the findings compared with those on epiphyseal articular cartilage. In the condylar cartilage, both bFGF and HS were localized in chondrocytes throughout the various zones including the fibrous, proliferative, mature-cell and hypertrophic zones: bFGF immunostaining was most significant in the proliferative and mature-cell zones, while intense staining for HS was found mainly in the hypertrophic zone. Immunoreaction for bFGF was detected in the nuclei of chondrocytes, whereas HS staining was observed in the cytoplasm. In articular cartilage, only chondrocytes beneath the superficial zone (intermediate zone) demonstrated both bFGF and HS immunoreactivities. Chondrocytes in the deeper calcifying region of the articular cartilage did not immunoreact for either bFGF or HS. These findings suggest that, in contrast to the epiphyseal articular cartilage, a continuous bFGF-mediated remodelling of cells and matrix takes place in mandibular condylar cartilage during the process of endochondral ossification.     

Decomposition of chlorofluorocarbons on TiO2ZrO2

The decomposition of chlorofluorocarbons (CFCs) in the presence of water was examined over a variety of solid acid catalysts. The TiO₂ZrO₂ catalyst was found to have the highest activity and longest life among the catalysts examined. The activity of the TiO₂ZrO₂ catalysts depended upon the content of TiO₂. At the contents of TiO₂ from 58 to 90 mole%, the TiO₂ZrO₂ catalysts exhibited high activity, and these catalysts were proven to contain TiZrO₄ crystal. From the study of the XRD peak intensity of the TiZrO₄ crystal, it was highest on the TZ-58 which contained 58 mole% of TiO₂, and decreased with increasing the content of TiO₂. Furthermore, the conversion of CFC113 measured at 673 K was highest at TZ-58, and decreased gradually with increasing TiO₂ content. Therefore, the TiZrO₄ crystal influences the activity of decomposition of CFC113. However, the TiO₂ZrO₂ catalyst was gradually deactivated during the reaction due to the elimination of titanium atoms. A good relationship was found between the activity on TiO₂ZrO₂ catalyst and bond energy of CCl in the compounds of chlorofluorocarbons and hydrochlorocarbons, suggesting that the rate controlling step was the cleavage of CCl bond.