An investigation of the drivers,barriers, and incentives for environmental management systems in the Malaysian food and beverage industry

Clean Technologies and Environmental Policy - Food production and consumption is one of the major causes of global environmental degradation. One way to address environmental impacts in the food...     

Trenched‐Sinker LDMOSFET (TS‐LDMOS) Structure for 2 GHz Power Amplifiers

This paper proposes a new LDMOSFET structure with a trenched sinker for high‐power RF amplifiers. Using a low‐temperature, deep‐trench technology, we succeeded in drastically shrinking the sinker area to one‐third the size of the conventional diffusion‐type structure. The RF performance of the proposed device with a channel width of 5 mm showed a small signal gain of 16.5 dB and a maximum peak power of 32 dBm with a power‐added efficiency of 25% at 2 GHz. Furthermore, the trench sinker, which was applied to the guard ring to suppress coupling between inductors, showed an excellent blocking performance below ?40 dB at a frequency of up to 20 GHz. These results confirm that the proposed trenched sinker should be an effective technology both as a compact sinker for RF power devices and as a guard ring against coupling.     

A WDM-PON Employing Fabry–PÉrot Laser Diodes Without a Seed Light Injection

We propose and demonstrate a wavelength-division-multiplexed passive optical network by employing double-contact Fabry-Perot laser diodes (F-P LDs) without a seed light injection. To avoid the high mode partition noise at low frequency, we use a binary phase-shift keying as a modulation format at a low relative intensity noise window. An error-free transmission is achieved by compensating a lasing envelope shift due to temperature variation with the double-contact F-P LD.     

Applications of Mesenchymal Stem Cells in Skin Regeneration and Rejuvenation

Mesenchymal stem cells (MSCs) are multipotent stem cells derived from adult stem cells. Primary MSCs can be obtained from diverse sources, including bone marrow, adipose tissue, and umbilical cord blood. Recently, MSCs have been recognized as therapeutic agents for skin regeneration and rejuvenation. The skin can be damaged by wounds, caused by cutting or breaking of the tissue, and burns. Moreover, skin aging is a process that occurs naturally but can be worsened by environmental pollution, exposure to ultraviolet radiation, alcohol consumption, tobacco use, and undernourishment. MSCs have healing capacities that can be applied in damaged and aged skin. In skin regeneration, MSCs increase cell proliferation and neovascularization, and decrease inflammation in skin injury lesions. In skin rejuvenation, MSCs lead to production of collagen and elastic fibers, inhibition of metalloproteinase activation, and promote protection from ultraviolet radiation-induced senescence. In this review, we focus on how MSCs and MSC-derived molecules improve diseased and aged skin. Additionally, we emphasize that induced pluripotent stem cell (iPSC)-derived MSCs are potentially advanced MSCs, which are suitable for cell therapy.     

Poly(trimethylene terephthalate) nanocomposite fibers comprising different organoclays: Thermomechanical properties and morphology

Poly(trimethylene terephthalate) (PTT) nano composites were synthesized by in situ polymerization at high temperature with two thermally stable organoclays: 1,2‐dimethylhexadecylimidazolium‐montmorillonite (IMD‐MMT) and dodecyltriphenyl phosphonium‐MMT (C₁₂PPh‐MMT). PTT hybrid fibers with various organoclay contents were melt‐spun at various draw ratios (DRs) to produce monofilaments. The thermomechanical properties and morphologies of the PTT hybrid fibers were characterized using differential scanning calorimetry, thermogravimetric analysis, wide‐angle X‐ray diffraction, electron microscopy, and mechanical tensile properties analysis. The nanostructure of the hybrid fibers was observed by both scanning and transmission electron microscopy, which showed that the clay layers were well dispersed into the matrix polymer, although some clusters or agglomerated particles were also detected. Unlike the hybrids containing IMD‐MMT, the clay layers of the C₁₂PPh‐MMT hybrid fiber were more dispersed into the matrix polymer. The thermal stability and tensile properties of the hybrid fibers increased with increasing clay content for DR = 1. However, as DR increased from 1 to 9 the ultimate strength and initial modulus of the hybrid fibers with IMD‐MMT increased slightly whereas those of C₁₂PPh‐MMT hybrid fibers decreased slightly. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4535–4545, 2006     

Preparation of poly(ethylene terephthalate) nanocomposite fibers incorporating a thermally stable organoclay

Summary A series of poly(ethylene terephthalate) (PET) nanocomposites containing organically-modified mica (HB-Mica) were prepared by in-situ interlayer polymerization of dimethyl terephthalate and ethylene glycol. The PET nanocomposites, which contained organoclay loadings of 0 to 2 wt %, were melt-spun to produce monofilaments with various draw ratios. Some of the clay particles appeared well dispersed within the PET matrix, while others were found to form agglomerates with sizes greater than 20 nm. The addition of a small amount of organoclay was sufficient to improve the thermo-mechanical properties of the PET hybrid fibers. Both the thermal stability and the mechanical tensile properties increased with increasing clay content for draw ratios of 1–16.     

Polyurethane–poly(methyl methacrylate) block copolymer dispersions through polyurethane macroiniferters

Polyurethane macroiniferter/poly(methyl methacrylate) block copolymer dispersions with inverse core‐shell morphologies were obtained from 1,1,2,2,‐tetraphenylethane‐1,2‐diol, dimethylol propionic acid, 4,4′‐diphenylmethane diisocyanate, and poly(propylene glycol) via a living radical mechanism. Molecular weight, particle size and dispersion viscosity, and thermal, mechanical, and dynamic mechanical properties of the dispersion cast films are reported as a function of copolymerization time. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1971–1975, 2003     

Annotating korean text documents with linked data resources

Semantic annotation approaches link entities from a knowledge base to mentions of entities in text to provide additional content-related information. Recently increasing use of resources from the Linked Open Data (LOD) Cloud has been made to annotate text documents thanks to the network of machine-understandable, interlinked data. While existing approaches to semantic annotation in the LOD context have been proven to be well performing with the English language, many other languages in general and the Korean language in particular are still underrepresented. We investigate the applicability of existing semantic annotation approaches to the Korean language by adapting two popular approaches in the semantic annotation field and evaluating those approaches on an English-Korean bilingual sense-tagged corpus. Further, general challenges in internationalization of annotation approaches are summarized.     

Video-based weathering gallery

We present a simple and effective method for constructing a gallery that consists of weathering effect elements called time-dependent appearance manifolds (TDAMs). Since TDAMs are computed from sample video clips showing dynamic weathering phenomena, they represent very smooth changes in the appearance of weathered pixels over time. Once a gallery with a variety of weathering effects is prepared, users can interactively choose and apply the predefined effects onto the surface of 3D graphic models and then finally assign the most appropriate one. This video-based weathering method can be implemented with very simple algorithms and it supports predictable, intuitive, and natural effects. Our system allows users to produce photorealistic augmented videos that include 3D graphic models weathered by our method. Moreover, users can easily enhance the realism of the augmented videos by manipulating rendering parameters such as the degree of weathering, texturing, lighting, and shadowing through user-friendly graphical user interfaces (GUIs).     

High-speed train navigation system based on multi-sensor data fusion and map matching algorithm

Navigation system for high-speed trains is necessary for increased operational safety and efficiency, new services for customers, and low maintenance cost. This paper proposes a high accuracy navigation system for high-speed trains based on a sensor fusion algorithm, with non-holonomic constraints, for multiple sensors, such as accelerometers, gyroscopes, tachometers, Doppler radar, differential GPS, and RFID, and a map matching algorithm. In the proposed system, we consider the federated Kalman filter for sensor fusion, where local filters utilize filter models developed for various sensor types. Especially, the local Kalman filter for RFID positioning, that is detected at irregular time intervals due to the varying train speed and RFID tag spacing, is developed to maintain high performance during GPS outage. In addition, an orthogonal projection map matching algorithm is developed to improve the performance of the proposed system. The performance of the proposed system is demonstrated with numerous simulations for a high-speed train in Korea. The simulation results are analyzed with respect to the existence of tunnel, RFID deployment spacing, RFID location uncertainty, and DGPS error.