Water absorption properties of phosphate glass fiber‐reinforced poly‐ϵ‐caprolactone composites for craniofacial bone repair

The moisture uptake of polymers and composites has increasing significance where these materials are specified for invasive, long‐term medical applications. Here we analyze mass gain and the ensuing degradation mechanisms in phosphate glass fiber reinforced poly‐?‐caprolactone laminates. Specimens were manufactured using in situ polymerization of ?‐caprolactone around a bed of phosphate glass fibers. The latter were sized with 3‐aminopropyltriethoxysilane to control the rate of modulus degradation. Fiber content was the main variable in the study, and it was found that the moisture diffusion coefficient increased significantly with increasing fiber volume fraction. Diffusion, plasticization, and leaching of constituents appear to be the dominant aspects of the process over these short‐term tests. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

PETOOL: MATLAB-based one-way and two-way split-step parabolic equation tool for radiowave propagation over variable terrain

A MATLAB-based one-way and two-way split-step parabolic equation software tool (PETOOL) has been developed with a user-friendly graphical user interface (GUI) for the analysis and visualization of radio-wave propagation over variable terrain and through homogeneous and inhomogeneous atmosphere. The tool has a unique feature over existing one-way parabolic equation (PE)-based codes, because it utilizes the two-way split-step parabolic equation (SSPE) approach with wide-angle propagator, which is a recursive forward–backward algorithm to incorporate both forward and backward waves into the solution in the presence of variable terrain. First, the formulation of the classical one-way SSPE and the relatively-novel two-way SSPE is presented, with particular emphasis on their capabilities and the limitations. Next, the structure and the GUI capabilities of the PETOOL software tool are discussed in detail. The calibration of PETOOL is performed and demonstrated via analytical comparisons and/or representative canonical tests performed against the Geometric Optic (GO) + Uniform Theory of Diffraction (UTD). The tool can be used for research and/or educational purposes to investigate the effects of a variety of user-defined terrain and range-dependent refractivity profiles in electromagnetic wave propagation.

Program summary

Program title: PETOOL (Parabolic Equation Toolbox)Catalogue identifier: AEJS_v1_0Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEJS_v1_0.htmlProgram obtainable from: CPC Program Library, Queen?s University, Belfast, N. IrelandLicensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.htmlNo. of lines in distributed program, including test data, etc.: 143 349No. of bytes in distributed program, including test data, etc.: 23 280 251Distribution format: tar.gzProgramming language: MATLAB (MathWorks Inc.) 2010a. Partial Differential Toolbox and Curve Fitting Toolbox requiredComputer: PCOperating system: Windows XP and VistaClassification: 10Nature of problem: Simulation of radio-wave propagation over variable terrain on the Earth?s surface, and through homogeneous and inhomogeneous atmosphere.Solution method: The program implements one-way and two-way Split-Step Parabolic Equation (SSPE) algorithm, with wide-angle propagator. The SSPE is, in general, an initial-value problem starting from a reference range (typically from an antenna), and marching out in range by obtaining the field along the vertical direction at each range step, through the use of step-by-step Fourier transformations. The two-way algorithm incorporates the backward-propagating waves into the standard one-way SSPE by utilizing an iterative forward–backward scheme for modeling multipath effects over a staircase-approximated terrain.Unusual features: This is the first software package implementing a recursive forward–backward SSPE algorithm to account for the multipath effects during radio-wave propagation, and enabling the user to easily analyze and visualize the results of the two-way propagation with GUI capabilities.Running time: Problem dependent. Typically, it is about 1.5 ms (for conducting ground) and 4 ms (for lossy ground) per range step for a vertical field profile of vector length 1500, on Intel Core 2 Duo 1.6 GHz with 2 GB RAM under Windows Vista.     

Effect of Surface and Oxygen Coverage on Ethylene Epoxidation

Ethylene epoxidation was studied as a function of oxygen coverage; for three different surfaces (111), (100) and (110) of three different IB metals using periodical DFT calculations. Oxygen coverage dependence was tested for 11, 25 and 33?% surface oxygen on Ag(111) surface. Calculations showed that increasing oxygen amount increased the exothermicity of the reaction while lowering the activation barriers. At studied oxygen ratios ethylene oxide and acetaldehyde formations proceed through OMC intermediate. In agreement with earlier studies, predicted selectivity is independent of surface structure. Generally the activation barriers for aldehyde formation are lower than those for epoxide formation on the studied surfaces. On copper surfaces the high stability of the precursor intermediates caused high activation barriers for the product formations. Also, epoxide formation is endothermic with respect to pre-oxygenated copper surfaces. On the other hand gold surfaces showed the smallest activation barriers for the product formations. Ag surfaces did not show conclusive differences for the activation barriers for epoxide versus aldehyde formation, which is in agreement with the ~50?% EO selectivity of the un-promoted metallic silver.     

Hydrogen liberation from the dehydrocoupling of dimethylamine–borane at room temperature by using novel and highly monodispersed RuPtNi nanocatalysts decorated with graphene oxide

Addressed herein, we reported the fabrication of the graphene oxide (GO) supported monodispersed ruthenium–platinum–nickel (RuPtNi) nanomaterials (3.40 ± 0.32 nm) to be utilized as a catalyst in the process of dimethylamine borane (DMAB) dehydrogenation. The nanoparticles were fabricated through the ultrasonication method by co-reducing the Ru³⁺, Pt²⁺ and Ni²⁺ cations and then the nanomaterials were characterized by X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), electron energy loss spectroscopy (EELS), inductively coupled plasma optical emission spectrometry (ICP-OES), and X-ray photoelectron spectroscopy (XPS). The fabricated nanomaterials showed outstanding efficiency and remarkable reusability in addition to their record catalytic activity at low temperatures and with extreme low concentrations. They had a significantly high turnover frequency (TOF) (727 h^?1) and low activation energy (E_a) (49.43 ± 2 kJ mol^?1) for DMAB dehydrocoupling. To the best of our knowledge, RuPtNi@GO NPs become a very promising candidate as the best catalyst ever.     

Degradation kinetics of PVC plasticized with different plasticizers under isothermal conditions

The aim of the present work is to elucidate the degradation kinetics of polyvinyl chloride (PVC) plasticized with some phthalate and nonphthalate plasticizers. A PVC thermomat instrument was utilized to maintain the isothermal degradation conditions at 140 and 160°C, and to suppress the oxidative degradation by means of nitrogen flow. The conductivity measurements were performed to follow hydrogen chloride (HCl) gas which is released upon PVC degradation and trapped in water. Dehydrochlorination of plasticized PVC films occurred with activation energies of about 23–160 and 26–117 kJ mol^?1 and the isokinetic temperatures, at which the dehydrochlorination rate constants of all p‐PVC films would have the same value, were found to be 171 and 128°C for initial and linear regions of dehydrochlorination curve, respectively. Plasticizer incorporation contributes to the stability of the films particularly after the consumption of stabilizer due to the dehydrochlorination. Influence of temperature rise by 20°C on the degradation rate constant is the lowest for DINCH having p‐PVC films as 0.36 and 0.42% increment at the initial region and linear region, respectively. On the other hand, DOTP reveals greater stability than the others do since the compensation ratio of the PVC film having DOTP is greater than the other films. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41579.     

Preparation of hybrid PU/PCL fibers from steviol glycosides via electrospinning as a potential wound dressing materials

In this study, the synthesis and application of biocompatible steviol glycosides based polyurethane/poly (ε-caprolactone) (PU/PCL) fibers was performed by electrospinning as a potential wound dressing materials that can be used for the closure of nonhealing wounds. During electrospinning, steviol glycoside-based polyurethane structures were used in blend formation with poly (ε-caprolactone) for easy producibility. Steviol glycosides are a natural abundant and easily accessible source as the main component of the wound dressing material due to their free hydroxyl groups, high biocompatibility, and hydrophilicity. The structure of steviol glycosides is composed of saccharide units and the free OH groups. Thus, steviol glycosides act as a crosslinker within the polyurethane structure and provides mechanical strength. For the production of steviol glycosides based PU/PCL fibers first, the steviol glycosides as a monomer were isolated from the stevia rebudiana. Then, polyurethane structures containing stevia glycoside were synthesized with hexamethylene diisocyanate, lactose and PEG-200 by solution polymerization technique. PCL was added to the prepared polyurethanes in a ratio of 1:2 and formation of nanofiber structure. The prepared wound dressing material was characterized by Fourier transform infrared, atomic force microscopy, and scanning electron microscope techniques. Swelling degree, water content and oxygen permeability assay of the steviol glycosides based PU/PCL wound dressing material was determined. In biocompatibility test, cell viability value of PU/PCL fibrous materials in indirect cytotoxicity test was determined as 86.9% and cell adhesion on hybrid PU/PCL fibers was showed as morphological. In accordance with this target, the steviol glycosides based PU/PCL wound dressing material can be produced easily and low cost. As a result, the wound dressing materials obtained with their high biocompatibility and low costs will be an effective and fast method for the healing of open wounds of diabetics.     

New Catalytic Materials for the Direct Epoxidation of Propylene by Oxygen: Application of High-Throughput Pulsed Laser Ablation

New catalytic materials were prepared by depositing nanoparticles of 35 different metals as well as their select binary combinations on Al₂O₃, CeO₂, SiO₂, TiO_2, and ZrO₂ supports. Nanoparticles were synthesized by high-throughput pulsed laser ablation (PLA). Catalytic materials were then screened for their selectivities towards the synthesis propylene oxide (PO) from propylene and oxygen using array channel microreactors at 1 atm and 300, 333, and 367 °C. A gas hourly space velocity (GHSV) of 20,000 h^?1 was used at the feed gas composition of 20% O₂, 20% C₃H₆ and the balance He. Initial screening experiments resulted in the discovery of SiO₂ supported Cr, Mn, Cu, Ru, Pd, Ag, Sn, and Ir as the most promising leads for PO synthesis. Subsequent experiments pointed to bimetallic Cu-on-Mn/SiO₂, for which the PO yields increased several fold over single metal catalysts. For multimetallic materials, the sequence of deposition of the active metals was shown to have a significant effect on the resulting catalytic activity and selectivity.     

Dyeing,fastness, and cytotoxic properties,and phenolic constituents of Anthemis tinctoria var. tinctoria (Asteraceae)

The present study focused on dyeing, fastness, cytotoxic properties, and phenolic constituents of various types of fabrics including viscose, cotton, wool, and polyester-viscose blended fabrics with different parts of Anthemis tinctoria var. tinctoria. Comparative study was carried out between ethanol and aqueous extracts of stem, flower, and root of the plant in terms of phenolic constituents, cytotoxic activity, and dyeing properties. It was found that the quantity of phenolic constituents of ethanol and aqueous extracts was quite different. All parts of the plant extract show 0% cytotoxicity except ethanol extract of the root. All the extracts exhibit better cytotoxic activity than the standard cancer drug 5-Florouracil. Ethanol and water extracts of A. tinctoria var. tinctoria plant were used to dye fabrics, but only the water extract displayed dyeing properties. Best color strength value (K/S = 9.19) was obtained with aqueous extract of the stem in the presence of alum mordant for cotton fabrics.