Stability enhancement of polypyrrole thin film ammonia sensor by camphor sulfonic acid dopant

Journal of Materials Science: Materials in Electronics - The main weakness of polymer gas sensors is its stability. Here, we report stability enhancement of a 100 nm polypyrrole (PPy) thin...     

Salt-assisted solution combustion synthesis of NiFe2O4: Effect of salt type

The effects of three types of salt including NaF, KCl, and NaCl on the properties of NiFe₂O₄ nanoparticles using salt-assisted solution combustion synthesis (SSCS) have been investigated. The synthesized powders were evaluated by SEM, TEM, FTIR, XRD, and VSM analysis. Also, the specific surface area (SSA), as well as size distribution and volume of the porosities of NiFe₂O₄ powders were determined by the BET apparatus. The visual observations showed that the intensity and time of combustion synthesis of nanoparticles have been severely influenced by the type of salt. The highest crystallinity was observed in the synthesized powder using NaCl. The SSA has also been correlated completely to the type of salt. The quantities of SSA was achieved about 91.62, 64.88, and 47.22 m²g^-1 for the powders synthesized by KCl, NaCl, and NaF respectively. Although the magnetic hysteresis loops showed the soft ferromagnetic behavior of the NiFe₂O₄ nanoparticles in all conditions, KCl salt could produce the particles with the least coercivity and remanent magnetization. Based on the present study, the salt type is a key parameter in the SSCS process for the preparation of spinel ferrites. Thermodynamic evaluation also showed that the melting point and heat capacity are important parameters for the proper selection of the salt.     

Imaging of the optic disc and retinal nerve fiber layer: the effects of age, optic disc area, refractive error, and gender.

We cross-sectionally examined the relationship between age, optic disc area, refraction, and gender and optic disc topography and retinal nerve fiber layer (RNFL) measurements, using optical imaging techniques. One eye from each of 155 Caucasian subjects (age range 23.0-80.8 y) without ocular pathology was included. Measurements were obtained by using the Heidelberg Retina Tomography (HRT), the GDx Nerve Fiber Analyzer, and the Optical Coherence Tomograph (OCT). The effects of age were small (R2 < 17%) and were limited to specific HRT, GDx, and OCT parameters. Disc area was significantly associated with most HRT parameters and isolated GDx and OCT parameters. Refraction and gender were not significantly associated with any optic disc or RNFL parameters. Although effects of age on the optic disc and RNFL are small, they should be considered in monitoring ocular disease. Optic disc area should be considered when cross-sectionally evaluating disc topography and, to a lesser extent, RNFL thickness.     

Synthesis and characterization of novel diimide–dinaphthols and resulting poly(urethane–imide)s

Novel diols containing imide groups were prepared via condensation of aromatic dianhydrides with 5‐amino‐1‐naphthol. The diimide–dinaphthols prepared were characterized by conventional methods and used to synthesize new poly(urethane–imide)s (PUIs). All the polymers were characterized and their physical properties, such as solubility, solution viscosity, thermal stability, and thermal behaviour were studied. The polymers obtained showed more thermal stability than typical polyurethanes because of the presence of the imide groups. Copyright © 2003 Society of Chemical Industry     

Real-time processing and compression of DNA microarray images.

In this paper, we present a pipeline architecture specifically designed to process and compress DNA microarray images. Many of the pixilated image generation methods produce one row of the image at a time. This property is fully exploited by the proposed pipeline that takes in one row of the produced image at each clock pulse and performs the necessary image processing steps on it. This will remove the present need for sluggish software routines that are considered a major bottleneck in the microarray technology. Moreover, two different structures are proposed for compressing DNA microarray images. The proposed architecture is proved to be highly modular, scalable, and suited for a standard cell VLSI implementation.     

A quantitative comparison of the effects of modeling approaches on system verification using a controlled challenge problem

Requirements Engineering - To reduce program risks, engineering methods capitalizing on modeling and machine assistance have been extensively investigated within systems engineering (and more...     

Bayesian estimation based on vague lifetime data

In Classical Bayesian approach, estimation of lifetime data usually is dealing with precise information. However, in real world, some informations about an underlying system might be imprecise and represented in the form of vague quantities. In these situations, we need to generalize classical methods to vague environment for studying and analyzing the systems of interest. In this paper, we propose the Bayesian estimation of failure rate and mean time to failure based on vague set theory in the case of complete and censored data sets. To employ the Bayesian approach, model parameters are assumed to be vague random variables with vague prior distributions. This approach will be used to induce the vague Bayes estimate of failure rate and mean time to failure by introducing and applying a theorem called “Resolution Identity” for vague sets. In order to evaluate the membership degrees of vague Bayesian estimate for these quantities, a computational procedure is investigated. In the proposed method, the original problem is transformed into a nonlinear programming problem which is then divided into eight subproblems to simplifying computations.     

A four-bias three-layer graphene-based THz absorber

Wave absorbers are considered to be fundamental building blocks for the manipulation of light. Almost all optical systems exploit absorbers to realize some functions. A highly tunable wide-band THz absorber is presented herein. Utilizing a dual-bias scheme with a single graphene layer leads to greater freedom to control the absorption response, while a conventional periodic array of graphene ribbons and a layer of graphene sheet are also exploited. Also, a circuit model representation for all the constituent parts of the proposed absorber is developed with an evolved design methodology. According to the simulation results, wide-band absorption from 3.5 to 6 THz is achieved.

     

Predicting roadheader performance by using artificial neural network

With growing use of roadheaders in the world and its significant role in the successful accomplishment of a tunneling project, it is a necessity to accurately predict performance of this machine in different ground conditions. On the other hand, the existence of some shortcomings in the prediction models has made it necessary to perform more research on the development of the new models. This paper makes an attempt to model the rate of roadheader performance based on the geotechnical and geological site conditions. For achieving the aim, an artificial neural network (ANN), a powerful tool for modeling and recognizing the sophisticated structures involved in data, is employed to model the relationship between the roadheader performance and the parameters influencing the tunneling operations with a high correlation. The database used in modeling is compiled from laboratory studies conducted at Azad University at Science and Research Branch, Tehran, Iran. A model with architecture 4-10-1 trained by back-propagation algorithm is found to be optimum. A multiple variable regression (MVR) analysis is also applied to compare performance of the neural network. The results demonstrate that predictive capability of the ANN model is better than that of the MVR model. It is concluded that roadheader performance could be accurately predicted as a function of unconfined compressive strength, Brazilian tensile strength, rock quality designation, and alpha angle R ² = 0.987. Sensitivity analysis reveals that the most effective parameter on roadheader performance is the unconfined compressive strength.