Electrocatalytic and simultaneous determination of isoproterenol, uric acid and folic acid at molybdenum (VI) complex-carbon nanotube paste electrode

This paper describes the development, electrochemical characterization and utilization of a novel modified molybdenum (VI) complex-carbon nanotube paste electrode for the electrocatalytic determination of isoproterenol (IP). The electrochemical profile of the proposed modified electrode was analyzed by cyclic voltammetry (CV) that showed a shift of the oxidation peak potential of IP at 175 mV to less positive value, compared with an unmodified carbon paste electrode. Differential pulse voltammetry (DPV) in 0.1 M phosphate buffer solution (PBS) at pH 7.0 was performed to determine IP in the range from 0.7 to 600.0 μM, with a detection limit of 35.0 nM. Then the modified electrode was used to determine IP in an excess of uric acid (UA) and folic acid (FA) by DPV. Finally, this method was used for the determination of IP in some real samples.     

Theoretical and practical investigations of copper ion selective electrode with polymeric membrane based on N,N′-(2,2-dimethylpropane-1,3-diyl)-bis(dihydroxyacetophenone)

A novel ion-selective poly(vinyl chloride) (PVC) membrane sensor for Cu²⁺ ions based on N,N′-(2,2-dimethylpropane-1,3-diyl)-bis(dihydroxyacetophenone) (NDHA) as a new ionophore was prepared and studied. The best performance was observed for the membrane composition, including 30:65:1:4 (wt%) = PVC:DBP:KTpClPB:NDHA. The electrode showed a good Nernstian slope of 30.0 ± 0.5 mV/decade in a wide linear range activity of 3.0 × 10⁻⁷ to 1.0 × 10⁻² mol dm⁻³ Cu(NO₃)₂ with limit of detection 2.5 × 10⁻⁷. Sensor exhibited a fast response time (t_95% < 10 s) and could be used for about 4 months in the pH range of 3.0–7.4. The proposed potentiometric sensor was found to work satisfactorily in partially non-aqueous media up to 30 (vol%) content of methanol, ethanol and acetone. Applications of this electrode for the determination of copper in real samples, and as an indicator electrode for potentiometric titration of Cu²⁺ ion using EDTA, were reported. In order to predict the extraction ability of NDHA for different metallic ions, the complexes [M(NDHA)] and [M(H₂O)₆] (where M = Cu²⁺, Co²⁺, Hg²⁺, Pb²⁺, Ag⁺, Mg²⁺, Ca²⁺, Mn²⁺, Zn²⁺, Cd²⁺, K⁺ and Al³⁺) were investigated using ab initio theoretical calculations. The metal binding capability was evaluated using the binding energy. Results of our study could be useful for prediction of the extraction power of this Schiff base and could play a guiding role in planning experiments.     

Fe2MoO4 magnetic nanocomposite modified screen printed graphite electrode as a voltammetric sensor for simultaneous determination of nalbuphine and diclofenac

Journal of Materials Science: Materials in Electronics - This study applied screen printed graphite electrode (SPGE) modified with the Fe2MoO4 magnetic nanocomposite for simultaneously determining...     

Novel nanostructure-based electrochemical sensor for simultaneous determination of dopamine and acetaminophen

A carbon-paste electrode modified with a novel molybdenum (VI) complex and carbon nanotubes have been applied to the electrocatalytic oxidation of dopamine (DA) which reduced the overpotential by about 125 mV with obviously increase the current response. Due to its strong electrocatalytic activity towards DA, the modified carbon-paste electrode can resolve the overlapped voltammetric waves of DA and acetaminophen (AC) into two well-defined voltammetric peaks with peak-to-peak separation in potentials of about 230 mV. This property allows to selective determination of DA in the presence of AC. The transfer coefficient (a) for the electrocatalytic oxidation of DA and diffusion coefficient of this substance under the experimental conditions were also investigated. In phosphate buffer solution of pH 7.0, the oxidation current increased linearly with two concentration intervals of DA, one is 0.1 to 40.0 μM and, the other is 40.0 to 800.0 μM. The detection limit (3σ) obtained by DPV was 76.0 nM. The proposed method was successfully applied to the determination of DA, and AC in some commercial pharmaceutical samples.     

Iodide selective membrane electrodes based on a Molybdenum–Salen as a neutral carrier

A new polymeric membrane electrode (PME) and a coated platinum disk electrode (CPtE) based on Schiff base complex of Mo(VI) as a suitable carrier for I^? ion were described. The influence of membrane composition, pH and possible interfering anions were investigated on the response properties of the electrodes. The electrodes exhibited a Nernstian slope of 63.0 ± 0.5 (CPtE) and 60.3 ± 0.4 (PME) mV decade^? 1 in I^? ion over a wide concentration range from 7.9 × 10^? 7 to 1.0 × 10^? 1 M for CPtE and 9.1 × 10^? 6 to 1.0 × 10^? 1 M I^? for PME. The potentiometric response of the electrodes was independent of the pH of the test solution in the pH range 2.0–8.5 with a fast response time (< 10 s). The process of transfer of iodide across the membrane interface was investigated by use of the AC impedance technique. The proposed sensors were successfully applied to direct determination of iodide in samples containing interfering anions, waste water and as indicator electrodes in precipitation titrations.