High-gain pseudomorphic InGaAs base ballistic hot-electron device

A high-gain ballistic hot-electron device is described. The GaAs-AlGaAs heterostructure device, with a 21-mm-thick pseudomorphic In _0.12Ga_0.88As base, had a current gain of 27 at 77 K and 41 at 4.2 K. As characteristically seen in ballistic devices, transfer into the L valley limited the maximum gain. The Γ-L valley separation in the strained In_0.12Ga_0.88As was estimated to be about 380 meV     

Rotation at the crack tip under uniform heat flow in an infinite medium

A complex analysis of rigid body rotation is presented. The crack-tip rotation for a line crack subjected to steady uniform heat flow is obtained in terms of thermal stress intensity factor in shear mode of the crack, the material and thermal parameters and coordinates of points close to the crack tip. The shear strip configuration is analysed on the basis of rotation and displacement at the end of the shear strip.     

Screen‐printed biosensor for allergens

Allergen levels in indoor environments, leading to many diseases, eg asthma, rhinitis and conjunctivitis, affect a large and increasing fraction of the population. A quite effective and inexpensive method of a rough but very rapid overall assessment of total allergen level in the environment has been developed. The method involved estimation of protein in allergen extracts by screen‐printed electrodes using two different techniques. The biosensor comprised a rhodinised carbon working electrode, a silver/silver chloride reference electrode and a carbon counter electrode. In the first method the enzyme protease reacted with allergen protein to release amino acid, which produced hydrogen peroxide in the presence of amino acid oxidase. This was detected amperometrically. The second method used potassium bromide as electrolyte and the electrode was subjected to dual potential. Bromine, released due to electrolysis at higher potential, was consumed by the allergen protein at lower potential. In the first method, a unique technique was used to microencapsulate the enzyme protease and immobilise it on the surface of the electrode by in‐situ polymerisation to avoid contact with the amino acid oxidase. A total of seven allergens were tested and the results gave a good correlation with the standard protein measurement method. Environmental specimens from indoors, schools and workplaces can be evaluated for the aeroallergens produced by dust mites, animal hairs, cockroach debris, pollens, etc as a means of determining the exposure risk. Copyright © 2005 Society of Chemical Industry     

TGF-beta mediated G1 arrest in a human melanoma cell line lacking p15INK4B: evidence for cooperation between p21Cip1/WAF1 and p27Kip1

We have studied TGF-beta mediated G1 arrest in WM35, an early stage human melanoma cell line. These cells have lost p15INK4B expression through loss of one chromosome 9 and rearrangement of the other. In asynchronously growing WM35, TGF-beta caused reductions in cyclin D1, cyclin A and cdk4 proteins and their associated kinase activities and an increase in both p21Cip1/WAF1 and p27Kip1. These findings were confirmed in cells released from quiescence in the presence of TGF-beta, in which TGF-beta inhibited or delayed the reduction in the cdk inhibitors that normally occurs in late G1. In contrast to observations in other cell types, there was an increased association of both p21Cip1/WAF1 and p27Kip1 with cyclin D1/cdk4 and with cyclin E/cdk2 during TGF-beta mediated arrest of asynchronously growing cells. Upregulation of p21Cip1/WAF1 preceded that of p27Kip1. Furthermore, p21Cip1/WAF1 and p27Kip1 were not present in the same cdk complexes but bound distinct populations of target cdk molecules. Both p21Cip1/WAF1 and p27Kip1 immunoprecipitates from asynchronously growing cells contained active kinase complexes. These KIP-associated kinase activities were reduced in TGF-beta arrested cells. It has been proposed that in TGF-beta arrested epithelial cells, up-regulation of p15INK4B and of p15INK4B binding to cdk4 serves to destabilize the association of p27Kip1 with cyclin D1/cdk4, promoting p27Kip1 binding and inhibition of cyclin E/cdk2. Our findings demonstrate that this is not a universal mechanism of G1 arrest by TGF-beta. In TGF-beta arrested WM35, which lack p15INK4B, the increased p21Cip1/WAF1 may serve a similar function to that of p15INK4B: initiating kinase inhibition and providing an additional mechanism to supplement the effect of p27Kip1 on G1 cyclin/cdks.     

Optimal scheduling with strict deadlines

The problem of dynamic scheduling of customers (messages) in time-critical environments is discussed. A single station (communication node) is considered, and it is assumed that each customer (message) must begin service (transmission) by an individually varying extinction time or else it is lost. Interest is in minimizing, in the sense of stochastic order, the number of messages lost over any time interval. A variety of results is proved that establishes the optimality of the shortest-time-to-extinction policy under rather general conditions. Similar results are found when messages have constraints on their complete transmission times. A network of M stations in tandem is considered under the hypothesis that a message is never lost and is scheduled irrespective of whether its extinction time (also called due date in this case) has expired or not. Under fairly general assumptions on the arrivals, deadlines, and services, it is shown that the earliest-due-date policy minimizes a form of average tardiness incurred over a finite operating horizon among all non-idling nonpreemptive policies. These problems are formulated in the context of stochastic dominance, and simple interchange arguments are used to establish all results     

Simplified steady-state model of an SCR-inverter-basedload-commutated commutatorless series motor

This paper presents a simplified analytical model of a silicon-controlled-rectifier based, load-commutated inverter driven, commutatorless series motor to predict its speed-current, torque-current and torque-speed characteristics. The model has been formulated, keeping in view the steady state equivalent circuit of a conventional DC series motor. The proposed analytical expressions relating torque and current with speed are found to follow an inverse law and that relating torque and current is found to be parabolic, as is expected in a "series" machine. The drive has been implemented, loaded with a DC generator and experimentally similar characteristics have been obtained, as predicted by the analytical model. The characteristics obtained experimentally are seen to follow the ones, predicted by the analytical model closely     

A study of solid circulation rate in a circulating fluidized bed

An experimental investigation under cold condition was made to study the effects of some operating/design parameters and non-mechanical L valve configuration on the solid circulation rate in a 4.5 m tall, 0.15 m diameter circulating fluidized bed with riser flow rate varying from 1400 litres/min to 2000 litres/min and bed inventory from 15 kg to 25 kg of sand of average sizes 200 μm, 400 μm and 500 μm. Solid circulation rate was estimated by measuring velocity of sand particle travelling through a vertical Perspex tube section at the bottom of the return leg. It was found to be in the range of 2.8 to 12.3kg/m²s, 0.07 to 9.1kg/m²s and 0.12 to 2.23kg/m²s for sand sizes of 200 μm, 400 μm and 500 μm, respectively for a horizontal L valve. Two mathematical correlations have been developed from the experimental results to predict solid circulation rate as a function of riser flow rate, aeration flow rate, total bed inventory and particle size used.     

Studies on the synthesis of SAPO-5

Silicoaluminophosphate (SAPO-5) molecular sieves have been synthesised from reaction mixtures having a molar composition of: 0.7–1.0 Al₂O₃:0.7–1.0 P₂O₅:0.01–2.0 SiO₂:xR:40 H₂O (where R = (C₂H₃)₃N or (C₂H₃)₄NOH and x = 1.5–2.5 for (C₂H₅)⁵N and 0.5 for (C₂H₅)₄NOH, at 473 K using various sources of alumina and silica. The effects of (i) varying the crystallinity of the alumina source (boehmite) and (ii) the use of different silica sources such as freshly prepared silica either from sodium silicate or paddy husk extract, silica gel from commercial water-glass, and tetraethyl orthosilicate have been studied. The crystallinity of boehmite has been found to have a strong effect on its reactivity towards the formation of SAPO-5. The activity of boehmite for SAPO-5 formation increased with a decrease in its crystallinity (or with increase in its moisture content). Any silica source devoid of sodium ions could be employed for the synthesis of SAPO-5. The process of crystallisation started as early as within 1.5 h of reaction and incorporation of silicon into the AlPO₄ framework has been noted at this stage. Formation of some tridymite phase as impurity has been observed under conditions such as (i) SiO₂ concentration > 1.7 mole and (ii) x > 2.0 when R = (C²H₅)₃N.