Control of molecular weight distribution of isotactic polypropylene obtained by a MgCl2-supported TiCl4 catalyst

It is of great importance in propene polymerization to control molecular weight and molecular weight distribution as well as isotacticity. Propene polymerization was carried out with an isospecific MgCl₂/TiCl₄-Cp₂TiMe₂ catalyst in the presence of various kinds of external Lewis bases. It was found that the molecular weight distribution of the isotactic polymer could be controlled while retaining high activity, high isospecificity and high molecular weight only by changing the kind and/or amount of the Lewis bases. © 1997 Elsevier Science Ltd.     

Effects of supercritical carbon dioxide treatment on the morphology of poly(l‐lactide)

Synthetic l ‐lactide random copolymers can be employed as controlled release materials when prepared using supercritical carbon dioxide (scCO₂), since they are biodegradable via hydrolysis. To determine the effects of thermal properties on polymer performance following scCO₂ processing, three types of poly(l ‐lactide) having different properties were assessed. The T_m of one poly(l ‐lactide) sample (H‐100) was found to be approximately 170 °C over the processing pressure range from 8 to 18 MPa, while a second sample (H‐440) also showed a constant value of approximately 152 °C. In contrast, the poly(l ‐lactide) REVODE exhibited a T_m of 146 °C prior to processing but a higher value of 147 °C following treatment at 8 MPa. Unlike the H‐100 and H‐440, the T_m value of the REVODE tended to decrease with increasing pressure. The T_g values increased greatly under mild conditions of 8 MPa pressure and a temperature of 40 °C. In particular, the T_g values for the H‐440 and REVODE increased by 4 °C and 5 °C, respectively. All T_g values were lowest at 12 MPa and increased with increasing processing pressure, although the effect of processing temperature was minimal. The Χ_{c DSC} of the H‐100 was 18% initially but increased to 20% upon scCO₂ processing at 40 °C and 14 MPa, and showed further increases at higher processing temperatures. Although the relationship between processing temperature and Χ_{c DSC} values for the H‐440 showed the same trend as observed with the H‐100, a different trend was seen for the REVODE. The Χ_{c XRD} values obtained from the XRD analyses differed from the values generated by DSC analysis, and showed a maximum degree of crystallinity following processing at 80 °C both with and without scCO₂ treatment. ATR FT‐IR analyses identified peaks due to semicrystalline regions in poly(l ‐lactide) samples treated with scCO₂, even when applying low temperatures. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44006.     

Research of Si and GaAs diode structures by Ion Beam Induced Charge (IBIC) collection

A Si pn junction diode and a GaAs Schottky diode were prepared for studying the basic mechanism of charge collection followed by high energy charged particle incidence in order to improve the resistance against single event upset. A 2 μm wide and 20 μm long rectangular Al electrode attached to a circular Al electrode with a 50 μm diameter was made on a 2.5 μm thick epilayer (minority carrier density 2 × 10¹⁵ /cm³). Both a Schottky electrode of Al (5 μm × 110 μm) and two ohmic electrodes of AuGe/Ni (110 μm × 110 μm) were made on a 2 μm thick epilayer (7.3 × 10¹⁵ /cm³) grown on a semi insulator GaAs substrate (1 × 10⁷ Ω cm). The internal device structure was examined by the IBIC (Ion Beam Induced Charge) method using a 2 MeV He⁺ ion microbeam. IBIC images clearly show an Al electrode, the SiO₂, and an epilayer. These results were then used to improve the qualities of the test diodes.     

Expression of ubiquitin protein in each organ at death from hypothermia

To isolate DNA for nucleoside analog incorporation studies, many investigators use RNase A to remove RNA from total cellular nucleic acid. We observed persistence of ribonucleotides from RNA in nucleic acid samples treated with RNase A alone. Although incubation of [5-3H]uridine-labeled nucleic acid with 50 microg/ml RNase A decreased tritium by 97%, HPLC analysis of the resulting DNA preparation digested to nucleosides revealed high levels of ribonucleosides. Increasing RNase A 10-fold (500 microg/ml) effected only a 1.7-fold reduction in ribonucleosides. Overall, the level of ribonucleosides was one-fourth that of the deoxynucleosides, primarily due to the high levels of guanosine. It was hypothesized that the ribonucleosides originated from guanosine-rich tracts of RNA since RNase A cuts preferentially 3' to pyrimidine monophosphates and to some extent after AMP. The addition of 0.05 microg/ml RNase T1, which preferentially cleaves RNA 3' to GMP, decreased total ribonucleosides by nearly 20-fold. In conclusion, we have developed a rapid method which removes greater then 99% of cellular RNA from nucleic acid extracts and a reversed-phase HPLC procedure that detects RNA contamination more sensitively than [5-3H]uridine labeling. These methods are useful for the determination of analog incorporation into DNA, especially for agents which incorporate into both DNA and RNA.     

A case report of incomplete endocardial cushion defect with mitral stenosis in an elderly patient

The following paper describes a mitral valve replacement (SJM 27 mm), the patch closure (EPTFE) of an ostium primum atrial septal defect and tricuspid annuloplasty (De Vega's method) in a 64-year-old female patient with an incomplete endocardial cushion defect and mitral stenosis. Surgery revealed thickened, mitral valve leaflets and the presence of a cleft, findings similar to those observed in case of rheumatic degeneration. Investigation of patient hemodynamics confirmed a diagnosis of Lutembacher syndrome and a lower with left ventricle volume. After surgery, the volume of left ventricle increased and the patients clinical course was uneventful.     

Effect of the preparation condition on the properties of titania-silica derived from tetraisopropyl titanate(IV) and tetraethyl orthosilicate

Titania-silica mixed oxide was prepared by hydrolyzing tetraethyl orthosilicate and tetraisopropyl titanate(IV) with a mixture of ethanol and 0.01 N aqueous acetic acid. Surface Ti content, BET surface area, and the number of acid sites increased with an increase in 0.01 N aqueous acetic acid. Thus hydrolysis of both alkoxides occurred simultaneously with a large amount of the acetic acid solution, and there was extensive interaction between TiO₂ and SiO₂ phases. With small amount of 0.01 N aqueous acetic acid, however, titanium hydroxide was first formed and, then, it was covered with the silica phase produced in a later stage of the hydrolysis. Increase in the acetic acid solution also led to the formation of a large amount of tetrahedral Ti species, which were active for the epoxidation of oct-1-ene usingt-butyl hydroperoxide as an oxidant.     

2-[1-(2,6-Dibenzhydryl-4-chlorophenylimino)ethyl]-6-[1-(arylimino)ethyl]pyridyliron(II) dichlorides: Synthesis,characterization and ethylene polymerization behavior

A series of 2-[1-(2,6-dibenzhydryl-4-chlorophenylimino)ethyl]-6-[1-(arylimino)ethyl]pyridine ligands (L1–L5) as well as the ligand 2,6-bis[1-(2,6-dibenzhydryl-4-chloro-phenylimino)ethyl]pyridine (L6) were synthesized and reacted with FeCl₂·4H₂O to afford the iron(II) dichloride complexes [LFeCl₂] (Fe1–Fe6). All new compounds were fully characterized by elemental and spectroscopic analysis, and the molecular structures of the complexes Fe1, Fe2 and Fe4 were determined by single-crystal X-ray diffraction, which revealed a pseudo-square-pyramidal geometry at iron. Upon activation with either MAO or MMAO, all iron pre-catalysts exhibited very high activity in ethylene polymerization with good thermal stability. To the best of our knowledge, the current system showed the highest activity amongst iron bis(imino)pyridine pre-catalysts reported to-date. The polymerization parameters were explored to determine the optimum conditions for catalytic activity, which were typically found to be 2500 eq. Al to Fe at 60 °C in the presence of MMAO, and 80 °C in the presence of MAO. The resultant polyethylene possessed a narrow molecular polydispersity index (PDI) consistent with the formation of single-site active species.     

Ethnic differences in birthweight: the role of lifestyle and other factors

Changes in the heat-induced gelation properties of reconstituted rabbit skeletal actomyosin stored under a high salt concentration at pH 6.0 and 0 degree C were investigated at different weight ratios of actin to myosin by using dynamic rheological and biochemical measurements. The addition of actin resulted in a pronounced peak maximum at about 50 degrees C and an accompanying temporary reduction in the range at about 50 degrees C to 60 degrees C. The more the initial actin concentration was increased, the greater was the area of the peak/shoulder. However, this area was markedly diminished with increasing storage time. As a result, the dynamic rheological pattern was transformed from an actomyosin type into a myosin type. The relationship between the G' value at 80 degrees C and the actin/myosin weight ratio was curvilinear, with a peak at the ratio of 0.05, immediately after storage was started. This profile changed during storage, depending on the extent to denaturation of actin and myosin in the reconstituted actomyosin (RAM). The G' value of actomyosin in 0.5 M KCl with a small actin/myosin ratio of 0.05 decreased to one-half of its initial value after 7 days of storage, whereas the G' value with a large actin/myosin ratio of 0.225 increased by about 1.6 times. In 1.5 M KCl, all the G' values declined to the level with myosin alone after 7 days of storage. The time-course plots of the remaining actin concentration in RAM at different weight ratios of actin to myosin after being treated with 0.5 M or 1.5 M KCl showed a decrease in the actin content with increasing storage time, and an increase in the KCl concentration to 1.5 M KCl promoted the denaturation of actin in RAM faster than with 0.5 M KCl. The surface hydrophobicity of each RAM sample progressively increased with increasing storage time, while little significant increase in the sulfhydryl (SH) content during storage was observed. It is concluded that changes in the heat-induced gelation properties of actomyosin during storage are largely attributable to the denaturation of actin rather than to the denaturation of myosin or to quantitative changes in the SH content and hydrophobicity.