TCP稳态流中慢启动序列对吞吐量性能的影响

在计算TCP稳态数据流吞吐量时一般都忽略了由于分组丢失而形成的各个慢启动阶段。在考虑TCP稳态数据流中慢启动序列的情况下,对Padhye的经典TCP稳态数据流模型进行了扩展。通过将Padhye的模型与扩展后的模型作比较,证明了在使用Padhye的模型作为多媒体流量控制模型时忽略超时后慢启动阶段的可行性和正确性。     

ATM网VBR编码会议电视业务模型的研究

文章研究了ATM网中VBR编码的会议电视业务的模型，提出一阶自回归、瑞利分布残差而不是高斯分布的AR序列模型──RAR（1），实验表明，该模型能产生足够多的大信元帧数，这对于研究信元丢失率特性具有至关重要的影响，而且简单实用。此外，RAR（1）模型在较少（16个）和较多（128个）VBR信源统计复用时，能很好地拟合实际的会议电视业务的统计数据。     

在ad hoc网络中一种新的节能路由切换模型

提出了一种基于能量消耗的路由切换模型(ERHM),它在路由维护中利用切换技术来使路由的能量消耗最小.仿真结果表明采用切换技术的ERHM模型的能量节省量要比不采用切换技术节约1.5～7.5倍,且节点的移动性越大,能量节约越多.     

桌域网及其新技术的研究

桌域网是一种适合于多媒体业务需要的小型ATM网 ,是对传统计算机网络的体系结构的一种补充。本文介绍了设计桌域网的基本策略 ,讨论了它的设计目标和特性 ,给出了桌域网的体系结构、网络接入设备及其性能 ,最后提出研究桌域网的几点建议。     

宽带相干源波达方向估计的新方法

相干信号子空间处理方法（ＣＳＭ）是一种通过构造聚焦（ｆｏｃｕｓｉｎｇ）矩阵来估计宽带相干源波达方向（ＤＯＡ）的有效方法。本文基于一致聚焦的概念，给出了一种可用于任意阵列的完全聚焦方法，从而极大地改善了ＤＯＡ的估计分辨率、估计精度等性能，大大降低了估计方法的信噪比阈值。文中在最后通过计算机仿真，与ＣＳＭ方法进行了比较，验证了本方法的优良性能。     

低温等离子体对天然胶原材料表面改性的研究

采用牛腱中提取的胶原蛋白为原料，制成薄膜试样，在Ｏ２和Ａｒ条件下，用低温等离子体处理天然胶原薄膜的表面．处理后的试样通过电子光谱（ＥＳＣＡ），红外光谱（ＩＲ），Ｘ射线衍射和接触角测量来研究其结构和性能的变化．实验表明：处理后胶原材料的表面、内部结构及化学成分都发生了明显的变化；它与水和二碘甲烷的接触角明显小于等离子处理前的可见低温等离子体方法能用于胶原材料的改性．     

用Sol－Gel法合成莫来石超细粉机理及过程的研究

以正硅酸乙酯（ＴＥＯＳ）和硝酸铝为原料，用Ｓｏｌ－Ｇｅｌ法合成了莫来石超细粉。探讨了ＴＥＯＳ在硝酸铝存在下的水解缩聚机理。并用差热一逸气、Ｘ一射线衍射、红外光谱及透射电镜等对莫来石的形成过程、结构及颗粒大小进行了研究。结果表明，参与了Ｓｏｌ－Ｇｅｌ过程，并起酸的催化作用，Ａｌ￣（３＋）也参与了网络结构。莫来石相是经过铝硅尖晶石转化成的，在１１５０℃明显生成。１２００℃尖晶石相消失，全部为莫来石，平均粒径为０．０５μｍ。     

局部应力分析中两个问题的讨论

容器上的局部结构承受外加载荷时，需要对该局部结构的强度进行评定。本文通过分析后指出，针对局部应力评定的强度条件应根据载荷的种类和性质确定。另外，本文通过实例说明，当进行管系应力分析，从而确定接管施加于容器上的载荷时，接管与容器连接处的柔度对该处载荷值和管道中的最大弯矩值都会有很大影响，在设计中考虑该柔度对设计的安全性和经济性都是有意义的。     

Mechanism of a one-step method for preparing silane grafting and cross-linking polypropylene

A high-melt-strength polypropylene (HMSPP) with partially cross-linking, modified from a normal isotactic polypropylene (IPP), is prepared by a one-step silane grafting and cross-linking method in a twin-screw reactive extruder. The melt grafting and cross-linking of IPP is achieved by using vinyl unsaturated silane with long chain as a grafting monomer, benzoyl peroxide (BPO) as an initiator, styrene as a coagent, and a little water as a catalyst for cross-linking. By analyzing the difference of the Fourier transformed infrared spectra between raw and modified PP, comparing the variety of the melt flow rate (MFR) and gel percentage between cured and uncured PP samples, and investigating the effect of catalyst on the MFR and gel percentage of modified PP, the partially cross-linked polypropylene in the way of one-step reactive extrusion has been verified. We put forward the reactive mechanism of one-step method based on our experimental results. In this mechanism, the hydrolysis and condensation of silane occur first through the catalysis of water and a compound with two or more double-bond is formed, which then the compound reacts with PP macroradicals to form the partially cross-linked PP. POLYM. ENG. SCI., 47:1004–1008, 2007. © 2007 Society of Plastics Engineers     

Effect of fly ash on drying shrinkage of thermal insulation mortar with glazed hollow beads

Drying shrinkage of thermal insulation mortar with glazed hollow beads was measured by a vertical length comparator, and the influences of fly ash with different contents (0, 18%, 36%, and 54% were used) on the long-term drying shrinkage were discussed. The mass loss was measured by the weighting method and the pore structure was characterized using three different methods, including the light microscopy, the mercury intrusion porosimetry (MIP), and the nitrogen adsorption/desorption (NAD) experiments, and the correlations among them were researched. The results show that drying shrinkage process of thermal insulation mortar includes three steps with increasing curing time: the acceleration period (before 7 d), the deceleration period (7-365 d), and the metastable period (after 365 d). Drying shrinkage in the first stage (7 d before) increases quickly owing to the fast water loss, and its development in the last two stages is attributed to the increment of the pore volume of mortar with the radius below 50 nm, especially the increment of the pore volume fraction of the pore radius within the size range between 7.3 nm and 12.3 nm. There is no change in the drying shrinkage development trend of mortar with fly ash addition, and three steps in the service life, but fly ash addition in the mortar restrains its value. There is a linear relationship between the drying shrinkage and fly ash content, which means that drying shrinkage reduces with fly ash addition.