Microwave-Assisted Graphite-Support Synthesis of Imidazolones

5(4H)-Oxazolones react with ammonium acetate under microwave irradiation and using graphite as support in an eco-friendly process. The reaction was carried out under solvent-free conditions and the imidazolones were obtained quantitatively. Moreover the reaction time was reduced too.     

An adaptive tracking problem for a family of retarded time-delay plants

Most of the existing switching control techniques are developed specifically for finite-dimensional linear time-invariant (LTI) systems. In many practical applications, however, it is essential to take time delay into consideration in the modelling as the control system can be highly sensitive to delay. In this paper, a multi-model switching control algorithm is proposed for retarded time-delay systems. It is assumed that the plant is represented by a family of known multi-input multi-output, observable, LTI models with multiple delays in the states, and that corresponding to each model in the known family, there exists a high-performance finite-dimensional LTI controller. In addition, it is supposed that a bound on the magnitude of the external inputs and disturbances is available. It is then shown that the proposed switching controller can stabilize the uncertain system, and that under some mild conditions, output tracking can be achieved in the given problem setting. Copyright © 2007 John Wiley & Sons, Ltd.     

Response level crossing rate of a linear system excited by a partially specified Gaussian load process

The problem of determining the maximum mean response level crossing rate of a linear system driven by a partially specified Gaussian load process has been considered. The partial specification of the load is given only in terms of its total average energy. The critical input power spectral (PSD) function, which maximizes the mean response level crossing rate, is obtained. The critical input PSD turns out to be highly narrow-banded which fails to capture the erratic nature of the excitation. Consequently, the trade-off curve between the maximum mean response level crossing rate and the maximum disorder in the input process, quantified in terms of its entropy rate, has been generated. The method of Pareto optimization is used to tackle the conflicting objectives of the simultaneous maximization of the mean response level crossing rate and the input entropy rate. The non-linear multi-objective optimization has been carried out using a recently developed multi-criteria genetic algorithm scheme. Illustrative example of determining the critical input of an axially vibrating rod, excited by a partially specified stationary Gaussian load process, has been considered.     

Preparation and properties of silicone‐containing poly(methyl methacrylate) gels

Poly(methyl methacrylate) (PMMA) gels with varying amounts of silicone and solvent and constant amounts of crosslinker were prepared by solution free radical crosslinking copolymerization of methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDM), tetraethoxysilane (TEOS) and vinyltriethoxysilane (VTES) comonomer systems. They were then studied in benzene at a total monomer concentration of 3.5 mol L^?1 and 70 °C. The conversion of monomer, volume swelling ratio, weight fraction and gel point were measured as a function of the reaction time, silicone concentration and benzene content up to the onset of macrogelation. Structural characteristics of the gels were examined by using equilibrium swelling in benzene, gel fraction and Fourier‐transform infrared (FTIR) analysis. The morphology of the copolymers was also investigated by SEM. Based on the obtained results, it was concluded that the FTIR data did not have the capacity to show the presence of the VTES or TEOS moiety in these kinds of copolymers. On the other hand, the variation of weight fraction of gel, W_g, and its equilibrium volume swelling ratio in benzene, q_v, exhibited the same behaviour as that of MMA/EGDM copolymers. Also, the dilution of the monomer mixture resulted in an increase in the gel point and swelling degree and a decrease in the percent of conversion and gel fraction. Finally, TEOS is not an ideal silicone compound for reaction in the MMA/EGDM copolymerization system, whereas VTES is a suitable silicone comonomer for this system and it has been proved useful. Copyright © 2005 Society of Chemical Industry     

Effects of vesnarinone, a novel orally active inotropic agent with an immunosuppressive action, on experimental cardiac transplantation in rats

BACKGROUND: Vesnarinone (VES) has been used for treatment of patients with congestive heart failure. In addition to inotropic effects, it seems to have immunosuppressive action. We tested the hypothesis that VES suppresses graft rejection, inotropic dysfunction caused by early rejection, and chronic coronary obstruction in a heterotopic rat cardiac transplantation model. METHODS: (1) To study acute rejection, hearts from Lewis-Brown Norway (LBN) rats were transplanted into Lewis rats, which were treated with or without VES (50 or 100 mg/kg/day orally). (2) In a functional study, LBN hearts with or without VES (100 mg/kg/ day) were isolated and perfused on day 3 after transplantation to assess inotropic response to isoproterenol (3 x 10(-8) M). (3) To study chronic rejection, Lewis hearts were transplanted into Fisher 344 rats, which were treated with or without VES (50 mg/kg/day) for 90 days. Coronary obstructive disease was assessed by morphometric analysis. There were five to six animals in each group. RESULTS: (1) VES (100 mg/kg/day) prolonged LBN heart survival (11.7 +/- 0.7 vs. 9.6 +/- 0.7 days in control; P < 0.05). (2) Left ventricular developed pressure was depressed in transplanted hearts regardless of VES treatment (84 +/- 12, 90 +/- 8 vs. 144 +/- 16 mmHg in untransplanted hearts; P < 0.01). The developed pressure after administration of isoproterenol in VES-treated hearts (184 +/- 20 mmHg) was higher than transplanted hearts without VES (118 +/- 16 mmHg; P < 0.05), and similar to untransplanted hearts (203 +/- 27 mmHg; P = NS). (3) Transplanted hearts treated with or without VES showed similar grades of rejection (2.0 +/- 0.3 vs. 2.6 +/- 0.2; P = NS), intimal area (6,996 +/- 3,186 vs. 13,441 +/- 5,165 microns2; NS), and coronary luminal obstruction (45 +/- 16% vs. 67 +/- 14%; NS). CONCLUSIONS: VES produces mild prolongation in survival of rat heart grafts, but has no significant effect on chronic graft atherosclerosis. VES preserves the positive inotropic effects of isoproterenol that are otherwise deteriorated by early acute rejection.     

Additive manufacturing in the spare parts supply chain

As additive manufacturing (AM) evolves to become a common method of producing final parts, further study of this computer integrated technology is necessary. The purpose of this research is to evaluate the potential impact of additive manufacturing improvements on the configuration of spare parts supply chains. This goal has been accomplished through scenario modeling of a real-life spare parts supply chain in the aeronautics industry. The spare parts supply chain of the F-18 Super Hornet fighter jet was selected as the case study because the air-cooling ducts of the environmental control system are produced using AM technology. In total, four scenarios are investigated that vary the supply chain configurations and additive manufacturing machine specifications. The reference scenario is based on the spare parts supplier's current practice and the possible future decentralization of production and likely improvements in AM technology. Total operating cost, including downtime cost, is used to compare the scenarios. We found that using current AM technology, centralized production is clearly the preferable supply chain configuration in the case example. However, distributed spare parts production becomes practical as AM machines become less capital intensive, more autonomous and offer shorter production cycles. This investigation provides guidance for the development of additive manufacturing machines and their possible deployment in spare parts supply chains. This study contributes to the emerging literature on AM deployment in supply chains with a real-world case setting and scenario model illustrating the cost trade-offs and critical requirements for technology development.     

Power-delay-product optimal repeater design for horizontal and vertical multilayer graphene nanoribbon interconnects

Journal of Computational Electronics - Power-delay-product optimal design of repeater size and number design for both horizontal and vertical multilayer graphene nanoribbon (MLGNR) interconnects is...     

Optical and photo catalytic characteristics of Ag<Subscript>2</Subscript>S/TiO<Subscript>2</Subscript> nanocomposite films prepared by electrochemical anodizing and SILAR approach

Ag₂S decorated titanium oxide nanotubes (Ag₂S/NTs) were prepared by electrochemical anodizing and successive ionic layer adsorption and reaction (SILAR) approach. The prepared samples were characterized by X-ray diffraction, field emission scanning electron microscopy coupled with energy dispersive X-ray analysis and diffuse reflectance spectroscopy. SEM results indicate titanium oxide nanotubes (NTs) with 90–220 nm in diameter and 15–30 nm in wall thickness were prepared by one-step anodizing method on the surface of titanium foils. Characterization of the Ag₂S/NTs samples indicated that the number of SILAR cycles influenced the morphology of fabricated films. The degradation of rhodamine B was used as a model reaction to evaluate the photo catalytic activity of the obtained samples. Results showed that the photo catalytic activity of Ag₂S/NTs nanocomposite samples is higher than that with bare NTs sample. The incorporation of Ag₂S on NTs improves the photo catalytic activity due to the synergetic effect. Ag₂S/NTs nanocomposite sample prepared by SILAR deposition with 2 cycles gives the highest degrading rate, which can be attributed to appropriate Ag₂S content and high surface area of this sample. Ag₂S/NTs nanocomposites are easy to be recycled and have good stability for repeated use. With the improved visible light degradation performance, Ag₂S/NTs samples would be expected to be used in water purification. Since these prepared electrodes can be easily removed and replaced after the photo catalytic reaction, avoiding the filtration step after photoreaction or the immobilizing process required for photo catalyst particles, the operation in the photo-reactor becomes much easier from an engineering point of view.     

Adaptive sliding mode control of chaotic dynamical systems with application to synchronization

We address the problem of control and synchronization of a class of uncertain chaotic systems. Our approach follows techniques of sliding mode control and adaptive estimation law. The adaptive algorithm is constructed based on the sliding mode control to ensure perfect tracking and synchronization in presence of system uncertainty and external disturbance. Stability of the closed-loop system is proved using Lyapunov stability theory. Our theoretical findings are supported by simulation results.     

A modified adaptive controller design for teleoperation systems

In this paper, a new adaptive controller is proposed to ensure the stability and good performance of a teleoperation system while a wide range of time delays is considered. For this means, a feedforward compensator is designed to ensure system passivity and then a new model reference adaptive controller (MRAC) is developed to provide good performance. The developed system demonstrates good stability and force tracking capabilities. A command generator tracker (CGT) is designed for a sample teleoperation system and the results are compared with the proposed system.