Inorganic–organic hybrid materials with zirconium oxoclusters as protective coatings on aluminium alloys

Inorganic–organic hybrid materials are attracting a strong scientific interest mainly for their outstanding inherent mechanical and thermal properties, which can be traced back to the intimate coupling of both inorganic and organic components. By carefully choosing the experimental parameters used for their synthesis, chemically and thermally stable acrylate-based hybrid material embedding the zirconium oxocluster Zr₄O₄(OMc)₁₂, where OMcCH₂C(CH₃)C(O)O, can be deposited as UV-cured films on aluminium alloys.

In particular, the molar ratios between the oxocluster and the monomer, the polymerisation time, the amount of photo-initiator and the deposition conditions, by using an home-made spray-coating equipment, were optimised in order to obtain the best performing layers in terms of transparency and hardness to coat aluminium alloy (AA1050, AA6060 and AA2024) sheets. Furthermore, it was also evaluated whether the hybrid coatings behave as barrier to corrosion.

Several coated samples were prepared and characterised. Environmental scanning electronic microscopy (ESEM) and scratch test were used to investigate the morphology of the films and to evaluate their scratch resistance, respectively. Electrochemical impedance spectroscopy (EIS) was performed in order to evaluate if the coatings actually protect the metallic substrate from corrosion.

In order to measure shear storage modulus (G′) and loss modulus (G″) of the materials used for coatings, bulk samples were also obtained by UV-curing of the precursors solution. Dynamical mechanical thermal analysis (DMTA) was performed in shear mode on cured disks of both the hybrid materials and pristine polymer for comparison. The values of T_g were read off as the temperatures of peak of loss modulus. The length and mass of all the samples were measured before and after the DMTA analysis, so that the shrinkage of the materials in that temperature range was exactly evaluated.     

Inverted Solution Processable OLEDs Using a Metal Oxide as an Electron Injection Contact.

A new type of bottom‐emission electroluminescent device is described in which a metal oxide is used as the electron‐injecting contact. The preparation of such a device is simple. It consists of the deposition of a thin layer of a metal oxide on top of an indium tin oxide covered glass substrate, followed by the solution processing of the light‐emitting layer and subsequently the deposition of a high‐workfunction (air‐stable) metal anode. This architecture allows for a low‐cost electroluminescent device because no rigorous encapsulation is required. Electroluminescence with a high brightness reaching 5700 cd m^–2 is observed at voltages as low as 8 V, demonstrating the potential of this new approach to organic light‐emitting diode (OLED) devices. Unfortunately the device efficiency is rather low because of the high current density flowing through the device. We show that the device only operates after the insertion of an additional hole‐injection layer in between the light‐emitting polymer (LEP) and the metal anode. A simple model that explains the experimental results and provides avenues for further optimization of these devices is described. It is based on the idea that the barrier for electron injection is lowered by the formation of a space–charge field over the metal‐oxide–LEP interface due to the build up of holes in the LEP layer close to this interface.     

Chia seeds as a source of natural lipid antioxidants

Chia (Salvia sp) seeds were investigated as a source of natural lipid antioxidants. Methanolic and aqueous extracts of defatted chia seeds possessed potent antioxidant activity. Analysis of 2 batches of chia-seed oils demonstrated marked difference in the fatty acid composition of the oils. In both batches, the oils had high concentrations of polyunsaturated fatty acids. The major antioxidant activity in the nonhydrolyzed extract was caused by flavonol glycosides, chlorogenic acid (7.1 × 10⁻⁴ mol/kg of seed) and caffeic acid (6.6 × 10⁻³ m/kg). Major antioxidants of the hydrolyzed extracts were flavonol aglycones/kaempferol (1.1 × 10⁻³ m/kg), quercetin (2.0 × 10⁻⁴ m/kg) and myricetin (3.1 × 10⁻³ m/kg); and caffeic acid (1.35 × 10⁻² m/kg). Two methods were used to measure antioxidant activities. Both were based on measuring bleaching ofβ-carotene in the coupled oxidation ofβ-carotene and linoleic acid in the presence of added antioxidants.     

Axial dispersion and enterainment of particles in wakes of bubbles

The entrainment and dispersion of solid particles in bubble columns was investigated experimentally and heoretically. A mechanistic model for the dispersion caused by entrainment in wakes of large solitary bubbles was developed. The dispersion coefficient was found to be dependent on the bubble size, bubble frequency, particle settling velocity and column surface area. Experimental tests were conducted in a rectangular bubble column. The system consisted of air, water and copper powder. Spherical cap bubbles were produced by a single nozzle. Significant entrainment of particles in wakes of rising bubbles observed in the lower region of the column, whereas, turbulence seemed to dominate the dispersion in the upper region of the tank. Calculated particle distributions were found to be in good agreement with experimental data.     

Conformational transitions in poly(butyl methacrylate)

Summary Temperature dependence of viscosity data was investigated on poly(butyl methacrylate) fractions in dilute solution. A discontinuity in intrinsic viscosity was observed in the 25°C–35°C temperature range. Sharp changes of unperturbed dimensions were visualized from this behaviour. The phenomenon can be accounted for by assuming conformational changes of the chain in different solvents.     

The SCD – Stem Cell Differentiation ESA Project: Preparatory Work for the Spaceflight Mission

Due to spaceflight, astronauts experience serious, weightlessness-induced bone loss because of an unbalanced process of bone remodeling that involves bone marrow mesenchymal stem cells (BMSCs), as well as osteoblasts, osteocytes, and osteoclasts. The effects of microgravity on osteo-cells have been extensively studied, but it is only recently that consideration has been given to the role of BMSCs. Previous researches indicated that human BMSCs cultured in simulated microgravity (sim-μg) alter their proliferation and differentiation. The spaceflight opportunities for biomedical experiments are rare and suffer from a number of operative constraints that could bias the validity of the experiment itself, but remain a unique opportunity to confirm and explain the effects due to microgravity, that are only partially activated/detectable in simulated conditions. For this reason, we carefully prepared the SCD – STEM CELLS DIFFERENTIATION experiment, selected by the European Space Agency (ESA) and now on the International Space Station (ISS). Here we present the preparatory studies performed on ground to adapt the project to the spaceflight constraints in terms of culture conditions, fixation and storage of human BMSCs in space aiming at satisfying the biological requirements mandatory to retrieve suitable samples for post-flight analyses. We expect to understand better the molecular mechanisms governing human BMSC growth and differentiation hoping to outline new countermeasures against astronaut bone loss.     

Editorial: Special issue on approximate dynamic programming and reinforcement learning

We are extremely pleased to present this special issue of the Journal of Control Theory and Applications.Approximate dynamic programming (ADP) is a general and effective approach for solving optimal control and estimation problems by adapting to uncertain environments over time.ADP optimizes the sensing objectives accrued over a future time interval with respect to an adaptive control law,conditioned on prior knowledge of the system,its state,and uncertainties.A numerical search over the present value of the control minimizes a Hamilton-Jacobi-Bellman (HJB) equation providing a basis for real-time,approximate optimal control.     

Usability evaluation methods for the web: A systematic mapping study

Context

In recent years, many usability evaluation methods (UEMs) have been employed to evaluate Web applications. However, many of these applications still do not meet most customers’ usability expectations and many companies have folded as a result of not considering Web usability issues. No studies currently exist with regard to either the use of usability evaluation methods for the Web or the benefits they bring.

Objective

The objective of this paper is to summarize the current knowledge that is available as regards the usability evaluation methods (UEMs) that have been employed to evaluate Web applications over the last 14 years.

Method

A systematic mapping study was performed to assess the UEMs that have been used by researchers to evaluate Web applications and their relation to the Web development process. Systematic mapping studies are useful for categorizing and summarizing the existing information concerning a research question in an unbiased manner.

Results

The results show that around 39% of the papers reviewed reported the use of evaluation methods that had been specifically crafted for the Web. The results also show that the type of method most widely used was that of User Testing. The results identify several research gaps, such as the fact that around 90% of the studies applied evaluations during the implementation phase of the Web application development, which is the most costly phase in which to perform changes. A list of the UEMs that were found is also provided in order to guide novice usability practitioners.

Conclusions

From an initial set of 2703 papers, a total of 206 research papers were selected for the mapping study. The results obtained allowed us to reach conclusions concerning the state-of-the-art of UEMs for evaluating Web applications. This allowed us to identify several research gaps, which subsequently provided us with a framework in which new research activities can be more appropriately positioned, and from which useful information for novice usability practitioners can be extracted.     

First Report on Genome Editing via Ribonucleoprotein (RNP) in Castanea sativa Mill.

Castanea sativa is an important tree nut species worldwide, highly appreciated for its multifunctional role, in particular for timber and nut production. Nowadays, new strategies are needed to achieve plant resilience to diseases, climate change, higher yields, and nutritional quality. Among the new plant breeding techniques (NPBTs), the CRISPR/Cas9 system represents a powerful tool to improve plant breeding in a short time and inexpensive way. In addition, the CRISPR/Cas9 construct can be delivered into the cells in the form of ribonucleoproteins (RNPs), avoiding the integration of exogenous DNA (GMO-free) through protoplast technology that represents an interesting material for gene editing thanks to the highly permeable membrane to DNA. In the present study, we developed the first protoplast isolation protocol starting from European chestnut somatic embryos. The enzyme solution optimized for cell wall digestion contained 1% cellulase Onozuka R-10 and 0.5% macerozyme R-10. After incubation for 4 h at 25 °C in dark conditions, a yield of 4,500,000 protoplasts/mL was obtained (91% viable). The transfection capacity was evaluated using the GFP marker gene, and the percentage of transfected protoplasts was 51%, 72 h after the transfection event. The direct delivery of the purified RNP was then performed targeting the phytoene desaturase gene. Results revealed the expected target modification by the CRISPR/Cas9 RNP and the efficient protoplast editing.