Prediction of spectral reflectance factor distribution of automotive paint finishes

It is necessary to determine the accurate reflectance of painted surfaces for the review of paint finishes by computer graphics (CG) before actual painting of the exterior color of automobiles, and for quality control during production and inspection processes. We have optimized a method for measuring reflectance by using a statistical technique. We have found that the reflectance of a painted surface is best measured at an incident angle of 60° and at five aspecular angles of 10°, 18°, 28°, 40°, and 90°. Our method makes it possible to accurately reproduce reflection characteristics of paint finishes containing special flake pigments, such as pearl mica. Also it was proved that our method can apply not only to solid and metallic coatings but to all painted surfaces. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 275–282, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20125     

On the modelling of scalar and mass transport in combustor flows

The results of a numerical study of swirling and non-swirling combustor flows with and without density variations are presented. Constant-density arguments are used to justify closure assumptions invoked for the transport equations for turbulent momentum and scalar fluxes, which are written in terms of density-weighted variables. Comparisons are carried out with measurements obtained from three different axisymmetric model combustors. The three experiments cover recirculating flow, swirling flow and variable-density, swirling flow inside model combustors. Together, they offer wide ranging flow conditions to test the validity of the models. Results show that the Reynolds stress/flux models do a credible job of predicting constant-density, swirling and non-swirling combustor flows with passive scalar transport. However, their improvements over algebraic stress/flux models are marginal. The extension of the constant-density models to variable-density flow calculations shows that the models are equally valid for such flows. Therefore, the present results argue well for the adoption of constant-density models for variable-density flows until a successfully validated variable-density model is available.     

Effects of brefeldin-A on Golgi morphology in human cultured fibroblasts observed in three-dimensional stereo scanning electron microscopy

Brefeldin A (BFA) has been reported to cause disassembly of the Golgi. We have used three-dimensional (3-D) high-resolution scanning electron microscopy (HRSEM) to investigate these effects in human skin fibroblast cells. The spontaneous reassembly during prolonged exposure to BFA and some effects of forskolin were observed. A BFA concentration of 5μg/ml caused Golgi complexes to become vesicular, resulting in a progressive decrease in the size of the Golgi. Morphologic changes were visible within 2 min of BFA incubation, and by 30 min no identifiable Golgi could be found. Spontaneous reassembly of the Golgi apparatus upon the removal of the BFA or with continued long-term exposure with BFA could not be confirmed. Preliminary experiments with forskolin were not effective in reversing or inhibiting the effects of BFA in human fibroblast cells grown in culture. This inability for spontaneous reassembly and nonreversal by forskolin may reflect a differential effect of BFA in various cell types. HRSEM has proven to be useful for observing 3-D morphologic effects of BFA in Golgi.     

The T cell-directed CC chemokine TARC is a highly specific biological ligand for CC chemokine receptor 4

Thymus and activation-regulated chemokine (TARC) is a recently identified CC chemokine that is expressed constitutively in thymus and transiently in stimulated peripheral blood mononuclear cells. TARC functions as a selective chemoattractant for T cells that express a class of receptors binding TARC with high affinity and specificity. To identify the receptor for TARC, we produced TARC as a fusion protein with secreted alkaline phosphatase (SEAP) and used it for specific binding. By stably transfecting five orphan receptors and five known CC chemokine receptors (CCR1 to -5) into K562 cells, we found that TARC-SEAP bound selectively to cells expressing CCR4. TARC-SEAP also bound to K562 cells stably expressing CCR4 with a high affinity (Kd = 0.5 nM). Only TARC and not five other CC chemokines (MCP-1 (monocyte chemoattractant protein-1), RANTES (regulated upon activation, normal T cells expressed and secreted), MIP-1alpha (macrophage inflammatory protein-1alpha), MIP-1beta, and LARC (liver and activation-regulated chemokine)) competed with TARC-SEAP for binding to CCR4. TARC but not RANTES or MIP-1alpha induced migration and calcium mobilization in 293/EBNA-1 cells stably expressing CCR4. K562 cells stably expressing CCR4 also responded to TARC in a calcium mobilization assay. Northern blot analysis revealed that CCR4 mRNA was expressed strongly in human T cell lines and peripheral blood T cells but not in B cells, natural killer cells, monocytes, or granulocytes. Taken together, TARC is a specific functional ligand for CCR4, and CCR4 is the specific receptor for TARC selectively expressed on T cells.     

Photodegradation mechanism and stabilization of polyphenylene oxide and rigid‐rod polymers

Poly(2,4‐dimethyl‐1,4‐phenylene oxide) (PPO), poly(benzo[1,2‐d:5,4‐d′]bisoxazole‐2,6‐diyl‐1,4‐phenylene) (PBO) and poly(benzo[1,2‐d:4,5‐d′]bisthiazole‐2,6‐diyl‐1,4‐phenylene) (PBZT), which are polymers with extended conjugated structures, undergo a self‐sensitized photo‐induced electron‐transfer reaction. A second component is not required. This article presents many similar observations on these polymers when they are exposed to light and evidence to support the proposed photo‐induced electron‐transfer mechanism. Methods to stabilize these polymers against photo‐oxidation are also described. Workers investigating other conjugated polymeric systems may find the experimental methods, observations and polymer stabilization approaches discussed in this review useful. Copyright © 2005 Society of Chemical Industry     

Frequency control techniques in coherent multichannel LAN's

This paper describes frequency control techniques for cold start and channel recognition functions in coherent multichannel local area networks. A Z-cut quartz etalon can be used to stabilize the optical transmitter frequencies. The capture range and the influence of humidity on a Fabry-Perot etalon are discussed. The frequency deviation of the optical transmitter was estimated to be less than ±1 GHz in the long term. A double AFC loop has been proposed for local LD frequency control. It showed a wide capture range of ±100 GHz. Coherent FDM receiver switching to the desired channel was demonstrated over a range from 0 to 40°C in an experiment     

Interferon therapy after ablation of Kent bundle for a patient with chronic hepatitis type B complicated with WPW syndrome

Cardiotoxicity of interferon-alpha or gamma, such as fatal arrhythmia and myocardial infarction, has been reported. Therefore cardiotoxicity of interferon should be seriously considered before administration for patients with a pre-existing heart disease. We treated a patient with chronic active hepatitis type B, coexisted with Wolff-Parkinson-White syndrome, who has had frequent attacks of paroxysmal atrial fibrillation. To prevent the occurrence of fatal arrhythmia with an interferon therapy in this patient, we performed radiofrequency catheter ablation of the Kent bundle. After the successful ablation, we could safely administered recombinant interferon alpha-2b for chronic hepatitis type B.     

Amorphous Ni---N---W film as a diffusion barrier between aluminum and silicon

The influence of nitrogen on the diffusion barrier properties of amorphous Ni---W films was studied. Nitrogen was introduced into the amorphous Ni---W film by co-sputtering nickel and tungsten in a premixed gas mixture of 90% Ar and 10% N₂, resulting in the formation of amorphous Ni₃₀N₂₁W₄₉ film. X-ray analysis indicates a detectable crystallization of the amorphous film after 30 min annealing in vacuum at 600°C, accompanied by the formation of W₂N, but backscattering spectrometry (BS) reveals a reaction with silicon only at about 725°C. The Schottky barrier height of this amorphous film on n-Si is stable for 30 min annealing up to at least 550°C. With an aluminum overlayer, BS indicates that an amorphous Ni₃₀N₂₁W₄₉ film effectively prevents the metallurgical interaction between aluminum and silicon for 30 min up to 600°C. The Schottky barrier height of that contact configuration is also stable up to at least 550°C, suggesting that amorphous Ni---N---W films have attractive features as diffusion barriers.