Characterization of the structure and properties of processed alumina-graphene and alumina-zirconia composites

The onset of hybrid alumina-based composites, which combines two or more nano-particles within the alumina matrix has already shown promising improvements in the matrix material. However, variations in mechanical properties including the optimum compositions that give improved properties faced with the development of alumina-based composites require further studies to understand the underlying mechanisms and synergistic effects of the nano-particle additions on the alumina matrix. In the current study, the structure and properties of Al?O?-graphene (0.5 wt%) and Al?O?–ZrO? (4 wt% and 10 wt%) composites fabricated via hot-pressing was studied as a baseline for multiple combinations. Even though the addition of 10 wt%ZrO? resulted in a 23% reduction in the grain size of the alumina matrix, the 4 wt%ZrO? addition resulted in a 14% increase in grain size as compared to the parent alumina matrix. X-ray diffraction analysis revealed that there was approximately 85% monoclinic (m-ZrO₂) vs. 15% tetragonal (t-ZrO₂) crystal structures in the A4ZrO? sample whilst the A₁₀ZrO? had approximately 93% m-ZrO₂ vs. 7% t-ZrO₂. The high-volume fraction of the monoclinic crystal structures in the A₁₀ZrO? accounts for the induced microcracks in the sample since the transition from the ductile-tetragonal to brittle-monoclinic is associated with the exertion of compressive stresses on the alumina matrix by the associated elastic volume expansion of m-ZrO₂. Also, the addition of 0.5 wt%graphene resulted in about 37% reduction in the grain size of the alumina matrix, and approximately 10% increase in hardness as a result of the distribution of graphene along the grain boundaries of the parent alumina matrix, which restricts grain coalescence and growth during processing. Furthermore, an increase up to 115% and 164% were observed in the fracture toughness (K_IC) with the inclusion of 0.5 wt%graphene and 10 wt%ZrO? respectively, which was primarily ascribed to the fine-grained microstructures and toughening mechanisms of the intergranular graphene and ZrO? particles.     

Effects of the glucocorticoid agonist, RU28362, and the antagonist RU486 on lung phosphatidylcholine and antioxidant enzyme development in the genetically obese Zucker rat

The biochemical maturation of the lung in late gestation and in the young animal is regulated by glucocorticoids. The present study was aimed at dissociating the different glucocorticoid receptor sites involved in these regulatory functions. The obese Zucker rat was selected as a model for this study as it exhibits hypersensitivity to glucocorticoid hormone action by virtue of its elevated receptor numbers and activity. Two synthetic steroid analogues were administered to obese animals; RU28362, a specific type II receptor agonist, and the type II antagonist RU486. RU28362 promoted a strong catabolic effect, which was associated with reduced food intake and the abolition of growth in the rats. The agonist, RU28362, attenuated developmental increases in antioxidant enzyme activities, and altered the growth of the tissue. At the age studied, development of the lung phosphatidylcholine (PC) system was almost complete, but RU28362 increased disaturated PC 16:0/16:0 concentrations by almost 2-fold, and altered the molecular composition of total pulmonary PC. RU486 attenuated the growth of the rats and reduced their food intake. Treatment with the type II antagonist attenuated lung growth and increased the activities of pulmonary copper zinc (Cu/Zn) and manganese (Mn) superoxide dismutases. RU486 had no effect on lung PC concentrations and molecular composition. The data suggest a role for type I glucocorticoid receptors in the regulation of the antioxidant enzyme system in the lung, as type II antagonism will channel endogenous glucocorticoid binding to the type I site. Type II receptor binding would appear to play a role in regulating the lung PC content.     

Cell cycle-dependent tumor necrosis factor apoptosis

To determine if tumor necrosis factor (TNF)-mediated apoptosis affects cells at defined stages of the cell cycle, WEHI-164/2F (WEHI) cells were synchronized at G0-G1 after 3-day cultures in medium containing RPMI 1640 and 0.5% FCS (RPMI-0.5% FCS). The arrested WEHI cells (60-75% in G0-G1) showed increased sensitivity to TNF killing, measured as 48-h 3-(5-dimethylthiazol-2-yl)-2,5-diphenyl-tetrazolium bromide assays, and 15-h apoptosis by propidium iodide staining and flow cytometry analysis. The TNF killing kinetics of G0-G1-arrested cells was similar to controls, and TNF did not accelerate or retard cell cycle progression of the arrested cells after feeding with fresh RPMI-0.5% FCS. However, TNF inhibited WEHI DNA synthesis as early as 1 h after treatment, and inhibition was proportionate to sensitivity to TNF-induced apoptosis. WEHI cells treated with TNF showed a higher percentage of cells in S phase with concomitant decrease in G0-G1 and G2-M. When cultured for 3-18 h in fresh RPMI-0.5% FCS to allow progression of the G0-G1-arrested cells toward the G1-S boundary, WEHI cells became more sensitive to TNF killing, especially at the 3-9 h time points. Moreover, TNF did not degrade [125I]5-iodo-2'-deoxyuridine-labeled WEHI DNA if the labeled cells were precultured for 9 h in fresh RPMI-0.5% FCS to allow them to pass S phase before the addition of TNF. These results show that TNF-induced apoptosis of WEHI cells is connected to cell cycle events; WEHI targets receive the TNF cytotoxic signal mainly at the G1-S boundary and begin to die by apoptosis as they exit from S phase.     

Dynamic simulations of the molecular conformations of wild type and mutant xanthan polymers suggest that conformational differences may contribute to observed differences in viscosity

Xanthan gum is an exopolysaccharide secreted by the bacterium Xanthamonas campestris whose ability to make solutions viscous at low concentrations and over a pH and temperature range have generated much interest in both academic and industrial environments. Mutant Xanthamonas strains have been derived that produce xanthan gums with an altered or variant subunit chemical structure and different measured viscosities when compared with the wild type (wt) form of the polymer. Two variant gums were targeted as potentially interesting in this study, these being the nonacetylated tetramer (natet) and the acetylated tetramer (atet), which both lack a side-chain terminal mannose residue and in one case (natet) lacks an acetate group on an internal mannose residue. Solutions of these tetrameric gums possess viscosities higher (natet) and lower (atet) than the wt gum, and therefore we have attempted to determine whether these molecules possess unique conformational preferences when compared with the wt and with each other. In this manner we can initiate an understanding of how a polysaccharide's conformation contributes to its solution properties. The GEGOP software permits a sampling of the static and dynamic equilibrium states of carbohydrate molecules, and this software was employed to calculate equilibrium states of representative oligosaccharides with chemical structures representative of xanthan-like molecules. Energy minimization techniques revealed similar local minima for all three molecules. Some of these minima are comprised of elongate backbone conformations (A type) in which side chains fold onto backbone surfaces. Other minima with A backbones possessed side chains in less intimate backbone contact especially when calculations were performed with a low dielectric constant. This phenomenon was particularly pronounced in the wt molecule where an increased number of negatively charged side-chain residues experience charge repulsion resulting in reduced side-chain-backbone contact. Metropolis Monte Carlo (MMC) dynamic simulations performed with an elevated temperature factor (1000 K) allowed a better qualitative representation of conformational space than 300 K simulations. Employing a nonhierarchical cluster analysis method (population density profile: PDP) coupled with a classification scheme, it was possible to partition resulting MMC data sets into conformational families. This analysis revealed that in simulations performed with different dielectric constant values (10, 25, and infinity) all molecules possessed primarily A-type backbones. Less elongate, more open helical backbone forms (B, C, D, J, and Flat-a) did occur during the simulations but were populated to a lesser extent. In the natet molecule significantly open helical backbones existed (E, F, G, H, and I) that did not occur in the lower viscosity wt and atet molecules. PDP clustering methods and subsequent conformational classification applied to the first residue (mannose) of the side chain permitted a determination of side-chain orientation. Comparison of all three molecules indicated a larger population of side-chain conformational families in less direct backbone contact for the wt molecule than either of the variant molecules (natet/atet) suggesting that the side chains in the wt are more flexible. Thus, a major conformational difference between the high viscosity natet and the lower viscosities of the wt/atet is the increased amount of open helical backbone in the natet. In addition, the significant difference between the higher viscosity wt and the lower viscosity atet is the increase side-chain flexibility in the wt. We hypothesize that conformational differences of this kind could form a partial explanation of the observed differences in viscosity between these xanthan-like polymers.     

SHAPE GENERALIZED ISOTHERMAL EFFECTIVENESS FACTOR FOR FIRST-ORDER KINETICS

A generalized effectiveness factor equation (Eq. (32)), in terms of modified Bessel functions, is derived for a catalyst pellet of arbitrary shape. The derivation is based on utilizing an appropriate one-dimensional approximation for the Laplacian in an arbitrary shaped body subjected to a uniform external concentration field. The comparison of the result with the available expressions for various geometries is highly satisfactory. It unifies the expressions for the three fundamental shapes, viz., infinite slab, infinite cylinder and sphere, and also compares very well with the exact solutions for finite shapes over the entire range of the Thiele modulus.     

Intrathecal fentanyl with small-dose dilute bupivacaine: better anesthesia without prolonging recovery

Recent concern regarding lidocaine neurotoxicity has prompted efforts to find alternatives to lidocaine spinal anesthesia. Small-dose dilute bupivacaine spinal anesthesia yields a comparably rapid recovery profile but may provide insufficient anesthesia. By exploiting the synergism between intrathecal opioids and local anesthetics, it may be possible to augment the spinal anesthesia without prolonging recovery. Fifty patients undergoing ambulatory surgical arthroscopy were randomized into two groups receiving spinal anesthesia with 3 ml 0.17% bupivacaine in 2.66% dextrose without (Group I) or with (Group II) the addition of 10 microg fentanyl. Median block levels reached T7 and T8, respectively (P = not significant [NS]). Mean times to two-segment regression, S2 regression, time out of bed, time to urination, and time to discharge were 53 vs 67 min (P < 0.01), 120 vs 146 min (P < 0.05), 146 vs 163 min (P = NS), 169 vs 177 min (P = NS), and 187 vs 195 min (P = NS) respectively. Motor blockade was similar between groups, but sensory blockade was significantly more intense in Group II (P < 0.01). Six of 25 blocks failed in Group I, whereas none failed in Group II. The addition of 10 microg fentanyl to spinal anesthesia with dilute small-dose bupivacaine intensifies and increases the duration of sensory blockade without increasing the intensity of motor blockade or prolonging recovery to micturition or street fitness. IMPLICATIONS: Concerns about the neurotoxicity of lidocaine have prompted efforts to find alternatives to lidocaine spinal anesthesia. We studied 50 patients undergoing ambulatory surgical arthroscopy and found that although small-dose bupivacaine alone is inadequate for this procedure, the addition of fentanyl makes it reliable.