A Stimulation Method to Assess the Contractile Status of the Lumbar Extensors in a Seated Posture

The purpose of present study was to develop and evaluate methods to assess stimulation responses of the lumbar extensors, as part of a longer‐term goal of detecting fatigue during prolonged sitting. Three stimulation frequencies (2, 5, and 8 Hz) were tested in separate stages, which include 3 stimulation trains and 4 sampling blocks. Repeated measures analyses of variance were used to determine whether any significant differences in mean stimulation responses occurred with respect to stimulation frequency, sampling block, and stimulation train. Reliability of measured stimulation responses was assessed within and between sampling blocks using intraclass correlation coefficients. Stimulation frequencies significantly affected the stimulation responses and time‐to‐potentiation differed between the 3 stimulation frequencies; it was highest for 2 Hz stimulation. All 3 stimulation frequencies resulted in excellent reliability within and between sampling blocks. Use of the current protocol at 2 Hz is recommended as appropriate to measure the lumbar extensors status during prolonged sitting.     

宽带连接：一天并不总是一天，但一个字节就是一个字节

我去了德国慕尼黑一年两次的Electronica贸易展,最近才从这次欧洲之行返回.我很高兴地告诉大家:高速互联网接入目前在整个西欧得到了广泛使用.     

哪种接口更具魅力？

在SAN领域居首要地位的是光纤通道，InfiniBand正在计算机集群领域发展，而具有更快速特点的以太网像一位潜在的万能博士正在隐隐出现。     

Response spectrum analysis of piping systems with elastic-plastic gap supports

A new seismic support device and its application in piping systems is described. The device, E-BAR (patented), can be cost effectively used for snubber replacement programs, mitigation of hydraulic transients, pipe whip and as a thermal stop. The device has pre-set gaps to allow free thermal movement. During a seismic or other dynamic load event, if the pipe movement exceeds the gap dimension, the device acts as an elastic or elastic-plastic restraint. The device also has a unique design feature for not exceeding the restraint force beyond a specified limit design value. To analyze piping systems with gap supports having elastic-plastic characteristics, modal analysis procedures for both response spectrum and time history methods are developed. The comparison of responses obtained from the procedures with nonlinear time history analysis and test results available in the literature shows excellent correlation. A pilot program conducted for snubber replacement with E-BARs demonstrates that the limit force feature of E-BAR makes them very attractive for snubber replacement. This is because a particular E-BAR with a specified limit design force can be selected, such that, the E-BAR replacing the snubber does not require any modifications be made to the existing support steel and hardware.     

Optically Tunable Nonlinearities in Polymers Based on Photoisomerizable Metal‐Based Coordination Complexes

The bottom‐up design of polymer films exhibiting quadratic nonlinear optical properties that can be tuned optically and chemically is described. The polymer matrices are doped with metal‐containing chromophores built around a Zn^II core and photoisomerizable ligands with two different geometries. These molecules possess specifically designed photophysical and nonlinear optical properties to be used towards all‐optical poling, an interference process between one‐ and two‐photon excitations that locally induces macroscopic second‐order effects in polymer films. It is shown that grafting the molecules onto the polymer chains improves the stability of the macroscopic photoinduced nonlinearity in the films.     

Estimating the costs of occupational injury in the United States

This article estimates workplace injury costs in the U.S. These costs have been studied in less detail than most injury costs. Our methods, which mostly use regularly published data, produce order-of-magnitude estimates. Overall, workplace injuries cost the U.S. an estimated $140 billion annually. This estimate includes $17 billion in medical and emergency services, $60 billion in lost productivity, $5 billion in insurance costs, and $62 billion in lost quality of life. One sixth of the societal costs result from the 3% of workplace injuries in motor vehicle crashes. Motor vehicle costs per injury are almost 6 times the workplace injury average.     

Comparing the Performance of Organic Solvent Nanofiltration Membranes in Non-Polar Solvents

Organic solvent nanofiltration (OSN) is gradually expanding from academic research to industrial implementation. The need for membranes with low and sharp molecular weight cutoffs that are able to operate under aggressive OSN conditions is increasing. However, the lack of comparable and uniform performance data frustrates the screening and membrane selection for processes. Here, a collaboration is presented between several academic and industrial partners analyzing the separation performance of 10 different membranes using three model process mixtures. Membrane materials range from classic polymeric and thin film composites (TFCs) to hybrid ceramic types. The model solutions were chosen to mimic cases relevant to today's industrial use: relatively low molar mass solutes (330–550 Da) in n-heptane, toluene, and anisole.     

Multiple responses analysis and modeling of Fenton process for treatment of high strength landfill leachate

Landfill leachate is one of the most recalcitrant wastes for biotreatment and can be considered a potential source of contamination to surface and groundwater ecosystems. In the present study, Fenton oxidation was employed for degradation of stabilized landfill leachate. Response surface methodology was applied to analyze, model and optimize the process parameters, i.e. pH and reaction time as well as the initial concentrations of hydrogen peroxide and ferrous ion. Analysis of variance showed that good coefficients of determination were obtained (R2 > 0.99), thus ensuring satisfactory agreement of the second-order regression model with the experimental data. The results indicated that, pH and its quadratic effects were the main factors influencing Fenton oxidation. Furthermore, antagonistic effects between pH and other variables were observed. The optimum H2O2 concentration, Fe(II) concentration, pH and reaction time were 0.033 mol/L, 0.011 mol/L, 3 and 145 min, respectively, with 58.3% COD, 79.0% color and 82.1% iron removals.     

Electromyographic evaluation of a bed assistive device for abdominal surgery patients in postoperative care

OBJECTIVE: Muscle activity with and without the use of commercially available patient assistive devices during bed rising and lowering was quantified. BACKGROUND: Limited research is available in understanding or evaluating the physical benefits of assistive devices for patient use following major abdominal surgery. METHODS: Twenty healthy participants (9 men, 11 women) took part in a laboratory study to test the effects of device configuration (five levels) and bed elevation angle (0 degree and 30 degrees) on mean and peak upper and lower rectus abdominis and external oblique concentric and eccentric muscle activity. RESULTS: Reduced muscle activity was associated with the use of an assistive device, as compared with manual bed rising (unassisted). Positioning the devices at a higher anchor height and/or increasing the bed elevation angle further reduced muscle activity. Objective and subjective differences between the two assistive devices evaluated in the study were found. CONCLUSION: These results suggest that self-assistive devices may speed recovery because of reduced loads on damaged tissues. APPLICATION: Potential applications of this research include the assessment of other commercially available lift aids or comparisons of self-assistive lift aids with hospital-housed lift aids used to speed recovery rates.