Correlation of the leakage current and charge pumping in silicon oninsulator gate-controlled diodes

The leakage and charge pumping currents were measured in gate-controlled MOS p-i-n diodes fabricated on thin SIMOX substrates. The efficiencies of the techniques as well as their complementary features are analyzed for various experimental conditions. The interface properties of device-grade SIMOX wafers are characterized and shown to be compatible with VLSI requirements. Special interface coupling effects, which occur only in fully depleted SOI devices and modify the conventional signature of charge pumping and leakage current, are thoroughly investigated     

Fault-aware Communication Mapping for NoCs with Guaranteed Latency

As feature sizes shrink, transient failures of on-chip network links become a critical problem. At the same time, many applications require guarantees on both message arrival probability and response time. We address the problem of transient link failures by means of temporally and spatially redundant transmission of messages, such that designer-imposed message arrival probabilities are guaranteed. Response time minimisation is achieved by a heuristic that statically assigns multiple copies of each message to network links, intelligently combining temporal and spatial redundancy. Concerns regarding energy consumption are addressed in two ways. First, we reduce the total amount of transmitted messages, and, second, we minimise the application response time such that the resulted time slack can be exploited for energy savings through voltage reduction. The advantages of the proposed approach are guaranteed message arrival probability and guaranteed worst case application response time.     

Noise contribution of the body resistance in partially-depleted SOIMOSFETs

An additional noise component is observed in the noise spectrum of transistors in a partially-depleted (PD) medium-thickness SOI-CMOS technology. We identify the origin of this additional noise in the noisy resistance of the body film. This resistance, coupled to the gate capacitance, forms an RC filter and generates the hump-shape of the additional noise component. Several experimental observations that support this model are presented     

Polarization independent isolator using spatial walkoff polarizers

A novel type of polarization-independent optical isolator is described which utilizes the polarization walkoff provided by birefringent crystals. Isolation of 44 dB is measured at a wavelength of 1.3 mu m with single-mode fiber insertion loss of 1.5 dB. A temperature-independent scheme is also described that provides at least 39 dB of isolation over the temperature range of 25-75 degrees C.<>     

PMR1, a Ca2+-ATPase in yeast Golgi, has properties distinct from sarco/endoplasmic reticulum and plasma membrane calcium pumps

PMR1, a P-type ATPase cloned from the yeast Saccharomyces cerevisiae, was previously localized to the Golgi, and shown to be required for normal secretory processes (Antebi, A., and Fink, G.R. (1992) Mol. Biol. Cell 3, 633-654). We provide biochemical evidence that PMR1 is a Ca2+-transporting ATPase in the Golgi, a hitherto unusual location for a Ca2+ pump. As a starting point for structure-function analysis using a mutagenic approach, we used the strong and inducible heat shock promoter to direct high level expression of PMR1 from a multicopy plasmid. Yeast lysates were separated on sucrose density gradients, and fractions assayed for organellar markers. PMR1 is found in fractions containing the Golgi marker guanosine diphosphatase, and is associated with an ATP-dependent, protonophore-insensitive 45Ca2+ uptake activity. This activity is virtually abolished in the absence of the expression plasmid. Furthermore, replacement of the active site aspartate within the phosphorylation domain had the expected effect of abolishing Ca2+ transport activity entirely. Interestingly, the mutant enzymes (Asp-371 --> Glu and Asp-371 --> Asn) demonstrated proper targeting to the Golgi, unlike analogous mutations in the related yeast H+-ATPase. Detailed characterization of calcium transport by PMR1 showed that sensitivity to inhibitors (vanadate, thapsigargin, and cyclopiazonic acid) and affinity for substrates (MgATP and Ca2+) were different from the previously characterized sarco/endoplasmic reticulum and plasma membrane Ca2+-ATPases. PMR1 therefore represents a new and distinct P-type Ca2+-ATPase. Because close homologs of PMR1 have been cloned from rat and other organisms, we suggest that Ca2+-ATPases in the Golgi will form a discrete subgroup that are important for functioning of the secretory pathway.     

Obtaining high-alumina cement at the semiluksk refractories factory

Conclusions We demonstrate that it is, in principle, possible to obtain refractory high-alumina cement on industrial equipment at the Semiluksk refractories factory. Technological parameters were developed for preparing raw mixtures, pressing the green articles and firing in a tunnel kiln. It was established that the mass percentage of SiO₂ in the raw mixture should not exceed 1.5%. For industrial production of high-alumina cement in department No. 1 it is necessary to implement measures on the mechanization of the production process.Translated from Ogneupory, No. 5, pp. 26–28, May, 1986.     

Dynamic Verification of Memory Consistency in Cache-Coherent Multithreaded Computer Architectures

Multithreaded servers with cache-coherent shared memory are the dominant type of machines used to run critical network services and database management systems. To achieve the high availability required for these tasks, it is necessary to incorporate mechanisms for error detection and recovery. Correct operation of the memory system is defined by the memory consistency model. Errors can therefore be detected by checking if the observed memory system behavior deviates from the specified consistency model. Based on recent work, we design a framework for dynamic verification of memory consistency (DVMC). The framework consists of mechanisms to verify three invariants that are proven to guarantee that a specified memory consistency model is obeyed. We describe an implementation of the framework for the SPARCv9 architecture, and we experimentally evaluate its performance using full-system simulation of commercial workloads.     

Lidar-based mapping of leaf area index and its use for validating GLOBCARBON satellite LAI product in a temperate forest of the southern USA

Lidar provides enhanced abilities to remotely map leaf area index (LAI) with improved accuracies. We aim to further explore the capability of discrete-return lidar for estimating LAI over a pine-dominated forest in East Texas, with a secondary goal to compare the lidar-derived LAI map and the GLOBCARBON moderate-resolution satellite LAI product. Specific problems we addressed include (1) evaluating the effects of analysts and algorithms on in-situ LAI estimates from hemispherical photographs (hemiphoto), (2) examining the effectiveness of various lidar metrics, including laser penetration, canopy height and foliage density metrics, to predict LAI, (3) assessing the utility of integrating Quickbird multispectral imagery with lidar for improving the LAI estimate accuracy, and (4) developing a scheme to co-register the lidar and satellite LAI maps and evaluating the consistency between them. Results show that the use of different analysts or algorithms in analyzing hemiphotos caused an average uncertainty of 0.35 in in-situ LAI, and that several laser penetration metrics in logarithm models were more effective than other lidar metrics, with the best one explaining 84% of the variation in the in-situ LAI (RMSE = 0.29 LAI). The selection of plot size and height threshold in calculating laser penetration metrics greatly affected the effectiveness of these metrics. The combined use of NDVI and lidar metrics did not significantly improve estimation over the use of lidar alone. We also found that mis-registration could induce a large artificial discrepancy into the pixelwise comparison between the coarse-resolution satellite and fine-resolution lidar-derived LAI maps. By compensating for a systematic sub-pixel shift error, the correlation between two maps increased from 0.08 to 0.85 for pines (n = 24 pixels). However, the absolute differences between the two LAI maps still remained large due to the inaccuracy in accounting for clumping effects. Overall, our findings imply that lidar offers a superior tool for mapping LAI at local to regional scales as compared to optical remote sensing, accuracies of lidar-estimate LAI are affected not only by the choice of models but also by the absolute accuracy of in-situ reference LAI used for model calibration, and lidar-derived LAI maps can serve as reliable references for validating moderate-resolution satellite LAI products over large areas.     

Abnormal drain current (ADC) effect and its mechanism in FD SOI MOSFETs

A new type of abnormal drain current (ADC) effect in fully depleted (FD) silicon-on-insulator (SOI) MOSFETs is reported. It is found that the drain current becomes abnormally large for specific front- and back-gate voltages. The drain current exhibits a transient effect due to the floating body behavior and no longer follows the conventional interface coupling theory for these specific front- and back-gate bias conditions. It is shown that the ADC can be generated by the combination of gate-induced drain leakage, transient effects, and parasitic bipolar transistor action in FD SOI MOSFETs.     

Slip in Vibrating Wire Experiments on 3He-4He Mixtures

No Heading We present vibrating wire viscometer experiments in concentrated and dilute ³He-⁴He mixtures showing that the slip length may become orders of magnitude larger than the mean free path due to increased specular scattering of the ³He quasiparticles with the superfluid ⁴He film on the wire. The experimental results are in good agreement with a recent theory for slip which accounts for the cylindrical geometry of the wire and for velocity slip in directions normal as well as tangential to the surface of the wire.PACS numbers: 67.60.Fp, 51.20.+d