Pathogenicity of three species of entomopathogenic nematodes to some major stored-product insect pests

Entomopathogenic nematodes (Nematoda: Heterorhabditidae and Steinernematidae) are commonly used biological control agents of insects in cryptic habitats, but their potential for suppressing stored-product insects in these habitats has not been explored previously. Here, we provide data from the first step in a program to evaluate entomopathogenic nematodes in the genus Steinernema as biological control agents of stored-product pests by determining their pathogenicity to some of the major stored-product pest species. When evaluated against larvae, pupae and adults of six pest species (Plodia interpunctella, Ephestia kuehniella, Oryzaephilus surinamensis, Tenebrio molitor, Tribolium castaneum, and Trogoderma variabile), and the adults of two additional pest species (Sitophilus oryzae and Rhyzopertha dominica), Steinernema riobrave was either the most pathogenic or of similar pathogenicity compared to S. carpocapsae and S. feltiae. A dose of 10 infective juveniles of S. riobrave caused 80% or higher mortality against larvae of P. interpunctella, E. kuehniella, T. castaneum, and O. surinamensis, pupae of T. castaneum and T. molitor, and adults of T. molitor and the two moth species. All stages of Trogoderma variabile exhibited 70% or higher mortality. Adults of S. oryzae and R. dominica exhibited low susceptibility with 15% and 35% mortality, respectively. On the basis of these results, S. riobrave was selected for further evaluation under more field-like conditions.     

An investigation of sugar extraction methods and the use of microwave power for date syrup processing: efficiency and color related considerations.

This study investigates the effect of extraction methods on the color of date syrup and the potential use of microwave power for syrup processing. Sugar solutions were extracted from dates by boiling, soaking and blending. Color and sugar content of the extracted solutions were measured, and the percentage of sugar extracted form the total fruit sugar determined. Boiling was found to be the most efficient method of extraction whereby 74% of total samples sugar was extracted. In contrast, only 54.2% of fruit sugar was extracted by blending and 42% by soaking. In addition, solutions extracted by soaking and blending had a foaming problem in the subsequent concentration process. The extraction method had no effect on the product final color. The extracted solution was concentrated using two heating methods: conventional and microwave heating at a 600 W capacity and a frequency of 2450 MHz applied at three power levels: 10, 7, and 6. In the heating process, 180 minutes were needed to achieve a 77% degrees Brix using convective heating, while it took 81, 138, and 166 minutes of microwave heating at power level 10, 7, and 6, respectively to achieve the same concentration. Water activity of the syrup was measured within a sugar content range of 50 to 80% degrees Brix and the sugar concentration at which the product is shelf stable was determined at 76%.     

Method to Characterize the Air Flow and Water Removal Characteristics During Vacuum Dewatering. Part II—Analysis and Characterization

This is part II of a study reported earlier on a method to characterize the air flow and water removal characteristics during vacuum dewatering. This article presents experimental data and analysis of results from the use of a cyclically actuated vacuum dewatering device for removing moisture from wetted porous materials such as paper with the intermittent application of vacuum and accompanying air flow though the material. Results presented include sheet moisture content as a function of residence time and hence water removal rate under a variety of process conditions. Also, experimental results on air flow through the wet porous structure and hence the role and importance of air flow during vacuum dewatering are presented. Vacuum dewatering process conditions include exit solids content between 11 and 20% solid under applied vacuum conditions of 13.5 to 67.7 kPa (4 to 20 in. Hg). Regression analysis indicated that the exit sheet moisture content exhibited a nonlinear relationship with residence time with exit solids reaching a plateau after a certain residence time. Final moisture content correlated linearly with the average overall flow rate of air through the paper sample and the basis weight of the material.     

Novel Short-chain Crosslinked Cationomeric Polyurethanes

Summary Novel PUs containing pyridinium moieties were synthesized by chain extending isocyanate endcapped prepolymers with N, N’-bis (2-hydroxyethyl) isonicotinamide. The pyridinium moieties in the PUs were chemically crosslinked using short-chain divalent quaternising agents. The polyurethane cationomers were characterized by spectral, thermal and mechanical analysis. Spectral results confirmed the quaternisation of tertiary nitrogen leading to crosslinking. Compared to conventional PUs, the crosslinked PU networks exhibited improved thermal stability. The damping value (i.e.) tan δ for cationomers were improved over a broad temperature range when compared to conventional PU.     

Characteristics of a typical lifting symmetric supercritical airfoil

The theoretical aerodynamic characteristics of a typical lifting symmetric supercritical airfoil demonstrating its superiority over thenaca 0012 airfoil from which it was derived are presented in this paper. Further, limited experimental results confirming the theoretical inference are also presented. Invited Lecture given at the 3rd Asian Congress on Fluid Mechanics, held in Tokyo during 1–5 September, 1986     

Multi-grid domain decomposition approach for solution of Navier–Stokes equations in primitive variable form

A new multi-grid (two-grid) pseudospectral element method has been carried out for solution of incompressible flow in terms of primitive variable formulation. The main objective of the proposed method is to apply the multi-grid technique solving the incompressible flow problems associated with three commonly encountered multi-grid environments. In domain decomposition terminology, it includes (I) partially overlapped subdomains, each of which has same types of grids; (II) partially overlapped subdomains, each of which has different types of grids; (III) local adaptive subdomains fully overlapped with the original computational domain (composite grids). The approach for flow problems, complex geometry or not, is to first divide the computational domain into a number of subdomains with the inter-overlapping area (partially or fully overlapped). In categories I and II, the fine-grid or coarse-grid subdomains can be defined by their representation, while in category III the fine-grid or coarse-grid subdomains are defined as usual. Next, implement the Schwarz Alternating Procedure (SAP) to exchange the data among subdomains, where the coarse-grid correction is used to remove the high frequency error that occurs when the data interpolation from the fine-grid subdomain to the coarse-grid subdomain is conducted. The strategy behind the coarse-grid correction is to adopt the operator of the divergence of velocity field, which intrinsically links the pressure equation, into this process. The solution of each subdomain can be efficiently solved by the direct (or iterative) eigenfunction expansion technique or preconditioned method with the least storage requirement, i.e. O(N²) in 2-D. Numerical results of (i) driven cavity flow (Re = 100,400) with Cartesian grids (category I) in each subdomain, (ii) driven cavity flow (Re = 3200) with local adaptive grids (category III) in each subdomain, and (iii) flow over a cylinder (Re = 250) with ‘O’ grids in one subdomain and Cartesian grids in another (category II) will be presented in the paper to account for the versatility of the proposed multi-grid method.     

Recovery of second-order optical nonlinearity in annealedproton-exchanged LiNbOx

The second-order nonlinear coefficients measured in proton-exchanged LiNbO₃ as a function of annealing time are discussed. Measurements of reflected second-harmonic power indicate that the second-order nonlinear coefficient d₃₃ is reduced to 60% of the bulk value as a result of proton exchange in pure benzoic acid. It is also shown that annealing restores the d-coefficients to almost the original value of the virgin crystal. For example, recovery to ~90% of the bulk value was obtained for a sample with a 0.3-μm-bulk proton-exchanged layer, annealed for 10 h at 350°C     

Microstructural developments in Mg-Ti-PSZ systems

The microstructure of titania-added Mg-partially-stabilized zirconia (PSZ) is dramatically influenced by thermal treatments. Effects of various sintering, heat-treatment and thermal shock cycling parameters on the microstructure of the Mg-Ti-PSZ system are described. Conditions favourable for the growth of needle-like Ti-rich reinforcements in highly thermalshock-resistant Mg-Ti-PSZ ceramics are identified. TiO₂ seems to play a catalytic role in the formation of Zr-rich networks during high-temperature (1700°C) sintering of the Mg-Ti-PSZ system, quite similar to those found in Mg-PSZ, heat-treated above 1300 °C.     

Effect of temperature on recombinant protein production using the Bm5/Bm5.NPV expression system

A series of experiments have been conducted using a recombinant baculovirus/insect cell expression system (Bm5/Bm5.NPV.CAT) to establish the optimum temperature for both cell growth and virus infection. Bm5 cell growth was found to be limited at temperatures below 22°C and ceased completely at temperatures above 34°C. In the range between 24 and 28°C, final cell densities always reached 96% of the highest achievable viable cell density. The shortest population doubling time was obtained at 28°C. Overall, a consistent increase in metabolism with increasing temperatures was observed. During the infection/viral replication phase, an increase in the temperature from 25 to 31°C resulted in a faster decrease in viable cell density and an earlier production of chloramphenicol acetyltransferase (CAT). Furthermore, protein yield at temperatures above 28°C was significantly reduced. Overall, the best temperature for the infection phase for the Bm5/Bm5.NPV expression system was found to be 25°C when the cells are cultured in serum free media.