城市管理项目前景光明

瑞典国际发展合作署（SIDA）支持城市管理项目（UMP）有许多原因。瑞典国际发展合作署发现城市管理项目在减轻贫困、良好治理、环境、性别平等和艾滋病防治等问题上的主要观点、关注重点与其发展重点相近。     

Industry evaluation of the Requirements Abstraction Model

Software requirements are often formulated on different levels and hence they are difficult to compare to each other. To address this issue, a model that allows for placing requirements on different levels has been developed. The model supports both abstraction and refinement of requirements, and hence requirements can both be compared with each other and to product strategies. Comparison between requirements will allow for prioritization of requirements, which in many cases is impossible if the requirements are described on different abstraction levels. Comparison to product strategies will enable early and systematic acceptance or dismissal of requirements, minimizing the risk for overloading. This paper presents an industrial evaluation of the model. It has been evaluated in two different companies, and the experiences and findings are presented. It is concluded that the requirements abstraction model provides helpful improvements to the industrial requirements engineering process.

Is MT translation? Reflections on a recent assault

This essay discusses the claims made by Hofstadter (1997) that machine translation research, as a result of its commercial aims, is based on a ‘pure content’ view of language, which is unrealistic even for specialized domains. The paper argues that this simplified view of language and translation cannot be blamed solely on industrial research; it is a tenet of basic research MT as well, and one that MT shares with much of AI. The question of whether there is a fundamental difference between narrow domain and general translation is discussed in the light of Melby's (1995) notion of a ‘wall’ between terms and general vocabulary.     

Associations between driving under the influence of alcohol or drugs,speeding and seatbelt use among fatally injured car drivers in Norway

Since 2005, all fatal road traffic crashes in Norway have been analyzed in-depth by multidisciplinary investigation teams organized by the Norwegian Public Roads Administration (NPRA). During the period 2005–2010, 608 drivers of cars or vans were killed in road traffic crashes. Blood samples were collected from 372 (61%) of the drivers and analyzed for alcohol and a large number of psychoactive drugs at the Norwegian Institute of Public Health (NIPH). After coupling the analytical results with the NPRA crash database, 369 drivers with a fatal outcome were identified and included. Alcohol or drug concentrations in blood above the legal limits were found in 39.8% of the drivers who were investigated for alcohol or drug impairment; 33.9% had blood alcohol concentrations above 0.5 g/L or concentrations of drugs above the equivalent Norwegian legal impairment limits or concentrations of amphetamines above 200 μg/L. Among drivers with a fatal outcome who had been impaired by alcohol or drugs, 64.6% were unbelted and 71.7% were speeding when the crash occurred; whereas 24.2% and 33.2% of the sober drivers were unbelted or speeding, respectively. Statistically significant associations were found between impairment by alcohol or amphetamines and driving unbelted or speeding. Excessive speeding is one of the main reasons for road traffic crashes and together with being unbelted the main reasons for a fatal outcome. This behavior might in many cases be due to increased risk-taking or negligence of safety measures as a result of alcohol or drug use.     

Interfacial Tension; a Stabilizing Factor for Janus Emulsions of Silicone Bixa Orellana Oils

The destabilization process was investigated for a Janus emulsion of silicone and Bixa Orellana oils stabilized by polyoxyethylene sorbitan monooleate (Tw 80) and carboxymethyl cellulose. The emulsion stabilized with Tw 80 showed significant and fast creaming, a process that was prevented by the addition of the polymer. During the extensive coalescence of the emulsions stabilized by Tw 80, the Janus topology was retained for months of storage until, finally, separation of the oils occurred. This result strongly indicates an unexpected stabilizing action of the i nterfacial free energy. This conclusion was supported by a calculation for a realistic model system of the interfacial energy difference between two cases of coalescence. In the first case, the two coalescing Janus drops united into a larger Janus drop, while in the second case two drops formed, each with only one oil. The first case gave a spontaneous reaction (reduced interfacial energy), while the second one meant an increase of energy, i.e. it cannot happen without adding energy. The authors are aware that this stabilization is a new phenomenon in emulsion science with potential ramifications in future emulsion technology. However, it is essential to realize that the stabilization is of temporary occurrence in the destabilization process, and the free energy to give a final emulsion state with separated oils is overwhelmingly dominant. In short, Janus emulsions will, in the end, separate into layers of the liquids, like all emulsions.     

A Model for Through Drying of Tissue Paper at Constant Pressure Drop and High Drying Intensity

A mathematical model for through drying of paper at constant pressure drop was developed. The model is based on physical properties; hence, basis weight, pressure drop, drying air temperature, pore size distribution, initial gas fraction, and tortuosity are important input parameters to the model. The model was solved for different combinations of the variables basis weight, drying air temperature, and pressure drop corresponding to industrial conditions and the results were compared with data from bench-scale experiments. The simulations show that the drying rate curve is very sensitive to the air flow rate and that correctly modeling the correlation between pressure drop and air flow rate is the most important factor for a successful model for through drying. The model was tuned by adjusting the parameters initial gas fraction and tortuosity in order to give the best possible fit to experimental data. For a given basis weight and pressure drop, different drying air temperatures resulted in relatively constant values of the fitted parameters. This means that the model can well predict the effects of changes in drying air temperature based on a tuning of the model performed at the same basis weight and pressure drop. However, for a given basis weight, an increase in pressure drop yielded fitted parameters that were somewhat different; i.e., a lower initial gas fraction and a higher tortuosity, a change that increases the resistance to air flow. This implies that the correlation between pressure drop and air flow rate in the model does not quite capture the nonlinear relationship shown by the experiments.     

Assessing the public health risk of microbial intrusion events in distribution systems: conceptual model, available data, and challenges

Low and negative pressure events in drinking water distribution systems have the potential to result in intrusion of pathogenic microorganisms if an external source of contamination is present (e.g., nearby leaking sewer main) and there is a pathway for contaminant entry (e.g., leaks in drinking water main). While the public health risk associated with such events is not well understood, quantitative microbial risk assessment can be used to estimate such risk. A conceptual model is provided and the state of knowledge, current assumptions, and challenges associated with the conceptual model parameters are presented. This review provides a characterization of the causes, magnitudes, durations and frequencies of low/negative pressure events; pathways for pathogen entry; pathogen occurrence in external sources of contamination; volumes of water that may enter through the different pathways; fate and transport of pathogens from the pathways of entry to customer taps; pathogen exposure to populations consuming the drinking water; and risk associated with pathogen exposure.     

Control volume based modelling in one space dimension of oscillating, compressible flow in reciprocating machines

We present an approach for modelling unsteady, primarily one-dimensional, compressible flow. The conservation laws for mass, energy, and momentum are applied to a staggered mesh of control volumes and loss mechanisms are included directly as extra terms. Heat transfer, flow friction, and multidimensional effects are calculated using empirical correlations. Transformations of the conservation equations into new variables, artificial dissipation for dissipating acoustic phenomena, and an asymmetric interpolation method for minimising numerical diffusion and non physical temperature oscillations are presented. The capabilities of the approach are illustrated with an example solution and an experimental validation of a Stirling engine model.     

Carbon loss from <Emphasis Type="Italic">Brachystegia spiciformis</Emphasis> leaf litter in the sandy soils of southern Mozambique

Leaves of Brachystegia spiciformis represent a substantial fraction of the total aboveground litter in bush fallow fields with sandy soils in southern Mozambique, where annual rainfall exceeds 600 mm. This species is one of the most important in the miombo woodland that is the natural vegetation of the region. Proper knowledge of the decomposition of its litter is therefore crucial for understanding processes responsible for natural build-up of fertility in agricultural soils abandoned to bush fallow during shifting cultivation. This study investigated the effects of soil water content and soil temperature on loss of organic carbon (C) from decomposing leaves in litterbags with 1 mm mesh size. The litterbags were buried 50 mm deep in recently abandoned agricultural fields cleared of any vegetation (Bare) and in more than 15-year-old bush fallow fields (Fallow) of sites covering a climatic transect with annual rainfall from <400 mm to >1,000 mm. Two patterns of C loss were observed, one in coastal and wetter agroecosystems (rainfall >600 mm) and the other in inland and drier agroecosystems (rainfall <600 mm). In the wetter agroecosystems C loss was faster, whereas in drier agroecosystems it was more sensitive to rainfall pulses. Similarly, C loss was faster in fallow fields than in bare fields. During summer, bare fields reached soil temperatures higher than the estimated upper boundary favourable for C loss from decomposing leaf litter at all sites. A simple dynamic decomposition model describing the C fraction remaining in the litterbags was developed. Coefficients of determination (R ²) for the individual experimental units varied between 0.79 and 0.97. The general model for all sites and fields improved explanation of total variation from 81% to 86% when measured soil temperature and soil water content were used as modifiers of decomposition rate, compared with the standard negative exponential model. Root-mean-square error and systematic bias were 9.7% and 0.5% of initial C, respectively. Decomposition was more strongly affected by soil water content than by soil temperature and explained 75% of total variation. Thus, rainfall is the main driver of C loss from leaf litter in these agroecosystems.