Progressive NO2 Sensors with Rapid Alarm and Persistent Memory-Type Responses for Wide-Range Sensing Using Antimony Triselenide Nanoflakes

Antimony triselenide (Sb₂Se₃) nanoflake-based nitrogen dioxide (NO₂) sensors exhibit a progressive bifunctional gas-sensing performance, with a rapid alarm for hazardous highly concentrated gases, and an advanced memory-type function for low-concentration (<1 ppm) monitoring repeated under potentially fatal exposure. Rectangular and cuboid shaped Sb₂Se₃ nanoflakes, comprising van der Waals planes with large surface areas and covalent bond planes with small areas, can rapidly detect a wide range of NO₂ gas concentrations from 0.1 to 100 ppm. These Sb₂Se₃ nanoflakes are found to be suitable for physisorption-based gas sensing owing to their anisotropic quasi-2D crystal structure with extremely enlarged van der Waals planes, where they are humidity-insensitive and consequently exhibit an extremely stable baseline current. The Sb₂Se₃ nanoflake sensor exhibits a room-temperature/low-voltage operation, which is noticeable owing to its low energy consumption and rapid response even under a NO₂ gas flow of only 1 ppm. As a result, the Sb₂Se₃ nanoflake sensor is suitable for the development of a rapid alarm system. Furthermore, the persistent gas-sensing conductivity of the sensor with a slow decaying current can enable the development of a progressive memory-type sensor that retains the previous signal under irregular gas injection at low concentrations.     

Cytotoxic effects of topotecan combined with various anticancer agents in human cancer cell lines

BACKGROUND: Topotecan (TPT) is a topoisomerase I poison that exhibits antineoplastic activity. Analysis of the cytotoxic effects of combinations of TPT and other anticancer agents has been limited. PURPOSE: We assessed the cytotoxic effects produced by combinations of TPT and other antineoplastic agents in experiments involving multiple human cancer cell lines of diverse histologic origins. METHODS: The cytotoxic effects of various antimetabolites (fluorouracil, methotrexate, or cytarabine), antimicrotubule agents (vincristine or paclitaxel [Taxol]), DNA alkylating agents (melphalan, bis[chloroethyl]nitrosourea [BCNU], or 4-hydroperoxycyclophosphamide [4HC]), and a DNA-platinating agent (cisplatin), alone and in combination with TPT, were measured in clonogenic (i.e., colony-forming) assays. HCT8 ileocecal adenocarcinoma, A549 non-small-cell lung carcinoma, NCI-H82ras(H) lung cancer, T98G glioblastoma, and MCF-7 breast cancer cell lines were used in these assays. The data were analyzed by the median effect method, primarily under the assumption that drug mechanisms of action were mutually nonexclusive (i.e., completely independent of one another). For each level of cytotoxicity (ranging from 5% to 95%), a drug combination index (CI) was calculated. A CI less than 1 indicated synergy (i.e., the effect of the combination was greater than that expected from the additive effects of the component agents), a CI equal to 1 indicated additivity, and a CI greater than 1 indicated antagonism (the effect of the combination was less than that expected from the additive effects of the component agents). RESULTS: When the mechanisms of drug action were assumed to be mutually nonexclusive, virtually all CIs for combinations of TPT and either antimetabolites or antimicrotubule agents revealed cytotoxic effects that were less than additive. The CIs calculated at low-to-intermediate levels of cytotoxicity for combinations of TPT and the DNA alkylating agents melphalan, BCNU, and 4HC also showed drug effects that were less than additive; in most cases, however, nearly additive or even synergistic effects were observed with these same drug combinations at high levels of cytotoxicity (i.e., at > or = 90% inhibition of colony formation). Results obtained with combinations of TPT and cisplatin varied according to the cell line examined. With A549 cells, less than additive effects were seen at low-to-intermediate levels of cytotoxicity, and more than additive effects were seen at high levels of cytotoxicity. With NCI-H82ras(H) cells, synergy was observed over most of the cytotoxicity range. CONCLUSIONS AND IMPLICATIONS: TPT cytotoxicity appears to be enhanced more by combination with certain DNA-damaging agents than by combination with antimetabolites or antimicrotubule agents. Interactions between TPT and other drugs can vary depending on the cell type examined. Further investigation is required to determine the basis of the observed effects and to determine whether these in vitro findings are predictive of results obtained in vivo.     

CT of appendicitis in children

PURPOSE: Our goal was to review the CT findings and to help define the role of CT in the evaluation of appendicitis in children. METHOD: Of 730 children with surgically proven appendicitis, 22 underwent preoperative CT evaluation. Their CT scans and operative and pathology records were retrospectively reviewed. The CT scans were evaluated for appendiceal wall thickness, diameter, and location, appendicoliths, pericecal inflammation, phlegmon, abscess, free fluid, small bowel dilatation, and bowel wall thickening. Criteria for diagnosing appendicitis were (a) appendiceal wall thickening (> 1 mm) or (b) presence of abscess, phlegmon, or pericecal inflammation associated with appendicolith(s). Prospective reports of ultrasound examinations performed within 2 days of the CT scans were available in 14 children and were correlated with the CT findings. RESULTS: An abnormally thickened appendix, with a diameter ranging from 9 to 18 mm, was seen in four children. Three appendices were retrocecal and one was near the cecal tip, anterior to the iliac vessels. Appendicoliths were present in 10 children, multiple in 1. Abscesses were seen in 13 of 22 children, multiple in 5. Phlegmon was seen in five children and pericecal inflammation in two. Bowel wall thickening was present in seven children and small bowel dilatation was noted in six. Other findings included free fluid, hydronephrosis, thickening of urinary bladder wall, air in the uterus and vagina, adenopathy, and thickening of the abdominal wall musculature. CT was diagnostic of appendicitis in 11 of 22 children (50%). In 14 children with both ultrasound and CT studies, CT was slightly better in diagnosing appendicitis and visualizing the abnormal appendix and was superior in defining the presence and extent of abscess and inflammation in 9 of 14 children. CONCLUSION: CT is a useful adjunct in diagnosing appendicitis in children, with a major role in cases of complicated appendicitis.     

Flexible, dry-released process for aluminum electrostatic actuators

We present an all-aluminum MEMS process (Al-MEMS) for the fabrication of large-gap electrostatic actuators with process steps that are compatible with the future use of underlying, pre-fabricated CMOS control circuitry. The process is purely additive above the substrate as opposed to processes that depend on etching pits into the silicon, and thereby permits a high degree of design freedom. Multilayer aluminum metallization is used with organic sacrificial layers to build up the actuator structures. Oxygen-based dry etching is used to remove the sacrificial layers. While this approach has been previously used by other investigators to fabricate optical modulators and displays, the specific process presented herein has been optimized for driving mechanical actuators with relatively large travels. The process is also intended to provide flexibility for design and future enhancements. For example, the gap height between the actuator and the underlying electrode(s) can be set using an adjustable polyimide sacrificial layer and aluminum “post” deposition step. Several Al-MEMS electrostatic structures designed for use as mechanical actuators are presented as well as some measured actuation characteristics     

Slow eroding biodegradable multiblock poloxamer copolymers

Biodegradable multiblock poloxamers (BMPs) with gel duration of 8 h to several weeks were prepared by varying their molecular weights from 4000 to 40 000 g mol^?1. The molecular weight of the BMP was controlled by changing the poloxamer to coupling agent ratio. Assuming a micelle packing model of the BMP gel, as in the case of a poloxamer gel, the micelle properties and critical gel concentration of BMPs were investigated on the basis of the scaling concept. The findings suggest that the control of molecular weight by hydrolyzable groups can be a facile approach to optimize the gel properties for biomedical applications. Copyright © 2005 Society of Chemical Industry     

Design of software systems based on axiomatic design

The ability to utilize fully automated flexible manufacturing systems (FMS) or develop reliable computer-integrated manufacturing (CIM) systems will depend on our ability to develop reliable and reusable software for large complex systems on a timely basis. To date, software design has not gone very far beyond the ad hoc trial-and-error stage. Consequently, the development of software is slow, expensive, unreliable, and unmanageable. The purpose of this paper is to provide a scientific basis for designing software. The approach used here is that of axiomatic design, which is based on two design axioms: the Independence Axiom and the Information Axiom. The axiomatic approach is based on the recognition of the following common elements in design: the existence of independent domains (i.e. the consumer domain, the functional domain, the physical domain, and the process domain); the need to map between various domains during the design process; the decomposition of the characteristic vectors (i.e. functional requirements, design parameters, and process variables) in their respective domains; the zig-zagging required between the domains for decomposition; and the need to satisfy the design axioms during the design process. The axiomatic approach discussed in this paper provides decision making tools for software design in addition to systematic means of knowledge and data representation, synthesis and analysis of software, and the construction of the module-junction structure diagram.     

Plasmid DNA is protected against ultrasonic cavitation-induced damage when complexed to cationic liposomes

Cationic liposomes bound to plasmid DNA are currently used for in vitro and in vivo gene therapy applications, but such complexes readily form large, heterogeneous aggregates that are not appropriate for pharmaceutical development. More importantly, size heterogeneity makes studies focused on optimizing gene transfer to cells difficult to conduct or understand. For this reason we have evaluated the effect of microprobe sonication on these complexes in an effort to achieve process-controlled size homogeneity. Complexes were prepared using a 7.2 kb reporter plasmid and the following liposomal lipid combinations: DDAB/DOPE (50:50 mol %), DDAB/DOPE/PEG-PE (50:45:5 mol %), DDAB/EPC (50:50 mol %), DDAB/EPC/PEG-PE (50:45:5, 50:40:10, 50:35:15 mol %), DODAC/DOPE (50:50 mol %), and DODAC/EPC (50:50 mol %) (DDAB, dimethyldioctadecylammonium bromide; DOPE, dioleoylphosphatidylethanolamine; PEG-PE, monomethoxypolyethylene glycol2000 succinate- distearoylphosphatidylethanolamine; EPC, egg phosphatidylcholine; DODAC, dioleoyldimethylammonium chloride). The influence of complex composition and lipid:DNA ratio was evaluated. Particle size was determined before and after complexation and again after sonication using the quasi-elastic light scattering technique. DNA integrity was assessed via agarose gel electrophoresis. Finally, gene transfection was evaluated using CHO cells that were transfected in vitro with sonicated and unsonicated complexes. It is established in this study that size reduction can occur, but this is dependent on cationic and neutral lipid composition and, in some cases, lipid:DNA ratio. Surprisingly, the process of sonication leaves a significant percentage of the plasmid DNA intact and capable of in vitro transfection. This study shows that plasmid DNA can be protected from damage due to sonication by liposome complex formation. This may indicate that more common pharmaceutical methods for size reduction which subject particles to mechanical stress may be applicable in preparation of liposome/DNA formulations for in vivo application.     

Improved accuracy of burn wound assessment using laser Doppler

The utility of the laser Doppler for determining burn depth has been questioned because of problems with technology and methodology. This study prospectively evaluates the ability of a new laser Doppler technique to predict burn healing time. Using the Periflux System 4000 laser Doppler, readings were taken on 305 burns (147 patients) on postburn day 3 or 4. Sixty-six wounds were used to derive a predictive function (phase I) and 152 wounds were used to test the function (phase II). Blood flow dynamics (flux), microvascular dilation capacity of the wounds to beat stress, and flow motion wave pattern (vasomotion) were studied using the laser Doppler, and seven parameters were evaluated to determine their relative contribution to the prediction of healing time. These parameters are hyperemic flux (flux value after heating to 42 degrees C), average hyperemic wave amplitude (AHWA), number of average flux units >100(F100), number readings with wave amplitude 75 (A5), average flux change (AFC), percentage of average flux increase, and relative flow capacity (RFC = AFC/average hyperemic flux). After readings were made, the wounds were observed and divided into two groups: those that healed in less than 14 days and those that healed or were grafted after 14 days. A step-wise discriminant analysis was used to assess the relative contribution of the Doppler-derived measures to healing time prediction. AHWA, F100, and RFC were included in the final discriminant function explaining 72% of the healing time variance (Wilks' lambda value 0.28; p value <0.0001). Predicted outcome = 0.05(AHWA) + 0.31(F100) + 5.0(RFC) - 2.3. With this derived function, there is 94% accuracy in the prediction of burn wound healing time compared with a physician predictive accuracy of 70%.     

ERCP and CT findings of ectopic drainage of the common bile duct into the duodenal bulb

OBJECTIVE: The purpose of this study was to evaluate ERCP and CT findings of ectopic drainage of the common bile duct into the duodenal bulb. CONCLUSION: Although rare, the diagnosis of ectopic drainage of the common bile duct into the duodenal bulb is important to prevent inadvertent damage during biliary tract or gastric surgery and to clarify the cause of chronic peptic ulcers.