Progressive NO2 Sensors with Rapid Alarm and Persistent Memory-Type Responses for Wide-Range Sensing Using Antimony Triselenide Nanoflakes

Antimony triselenide (Sb₂Se₃) nanoflake-based nitrogen dioxide (NO₂) sensors exhibit a progressive bifunctional gas-sensing performance, with a rapid alarm for hazardous highly concentrated gases, and an advanced memory-type function for low-concentration (<1 ppm) monitoring repeated under potentially fatal exposure. Rectangular and cuboid shaped Sb₂Se₃ nanoflakes, comprising van der Waals planes with large surface areas and covalent bond planes with small areas, can rapidly detect a wide range of NO₂ gas concentrations from 0.1 to 100 ppm. These Sb₂Se₃ nanoflakes are found to be suitable for physisorption-based gas sensing owing to their anisotropic quasi-2D crystal structure with extremely enlarged van der Waals planes, where they are humidity-insensitive and consequently exhibit an extremely stable baseline current. The Sb₂Se₃ nanoflake sensor exhibits a room-temperature/low-voltage operation, which is noticeable owing to its low energy consumption and rapid response even under a NO₂ gas flow of only 1 ppm. As a result, the Sb₂Se₃ nanoflake sensor is suitable for the development of a rapid alarm system. Furthermore, the persistent gas-sensing conductivity of the sensor with a slow decaying current can enable the development of a progressive memory-type sensor that retains the previous signal under irregular gas injection at low concentrations.     

Length of maternity leave and quality of mother-infant interactions

The aim of this study was to assess the association between the length of maternity leave and the quality of mother-infant interactions; 198 employed mothers of 4-month-old infants were interviewed and videotaped in their homes during a feeding time. Hierarchical multiple regression analyses indicated a direct association between shorter length of leave and more negative affect and behavior in maternal interactions with their infants. Infant and mother stressor/protective variables added significantly in predicting the quality of the mother-infant relationship. There were also significant interaction effects between the length of leave and these variables. Mothers who either reported more depressive symptoms or who perceived their infant as having a more difficult temperament and who had shorter leaves, compared with mothers who had longer leaves, were observed to express less positive affect, sensitivity, and responsiveness in interactions with their infants. The public policy implications of the relation between length of maternity leave, maternal and infant individual differences, and the quality of mother-infant interactions are discussed.     

Flexible, dry-released process for aluminum electrostatic actuators

We present an all-aluminum MEMS process (Al-MEMS) for the fabrication of large-gap electrostatic actuators with process steps that are compatible with the future use of underlying, pre-fabricated CMOS control circuitry. The process is purely additive above the substrate as opposed to processes that depend on etching pits into the silicon, and thereby permits a high degree of design freedom. Multilayer aluminum metallization is used with organic sacrificial layers to build up the actuator structures. Oxygen-based dry etching is used to remove the sacrificial layers. While this approach has been previously used by other investigators to fabricate optical modulators and displays, the specific process presented herein has been optimized for driving mechanical actuators with relatively large travels. The process is also intended to provide flexibility for design and future enhancements. For example, the gap height between the actuator and the underlying electrode(s) can be set using an adjustable polyimide sacrificial layer and aluminum “post” deposition step. Several Al-MEMS electrostatic structures designed for use as mechanical actuators are presented as well as some measured actuation characteristics     

IL-4- and IL-5-secreting lymphocyte populations are preferentially stimulated by parasite-derived antigens in human tissue invasive nematode infections

Helminth infections in humans and animals are associated with strong T helper 2 (Th2) responses. To determine whether parasite-derived Ag preferentially expand a Th2-like cell population, a filter immunoplaque assay was used to enumerate the frequencies (F0) of PBMC and CD4(+)-enriched PBMC from individuals with helminth infections secreting selected cytokines in response to parasite-derived (PAg) and nonparasite antigens (NPAg). In 20 individuals with lymphatic filariasis, frequency analysis of PBMC secreting IL-4 and IFN-gamma indicated that the F0 of PAg-specific IL-4-secreting cells (geometric mean F0 (GM): 1/12,100) was 57-fold higher than the corresponding F0 of NPAg-reactive cells (GM: 1/692,000; p < 0.02). In marked contrast, the F0 of IFN-gamma-secreting cells responding to PAg (GM: 1/2,700) did not differ from those of cells specific for NAPg (GM: 1/3,400; p = 0.83). In another group of helminth-infected individuals, the F0 of highly enriched CD4+ cells secreting IL-4 and IL-5 in response to PAg (GMs: 1/2,600 and 1/5,600 CD4+ cells, respectively) were also found to be significantly higher than those specific for NPAg (GMs: 1/291,000 and 1/303,000 CD4+; p < 0.05 and p < 0.01, respectively), whereas the corresponding F0 of IFN-gamma- and granulocyte-macrophage-CSF-secreting cells were equivalent for PAg and NPag. Furthermore, the proportion of PAg-specific IL-4- and IL-5-secreting CD4+ cells relative to all cells secreting the given cytokine were approximately 29-fold higher than the proportion of NPAg-specific cells secreting these cytokines. Again, the corresponding proportions of Ag-specific IFN-gamma-and GM-CSF-secreting CD4+ cells were equivalent for PAg and NPAg. Thus, in this ex vivo system, a circulating population of IL-4- and IL-5-secreting (Th2-like) cells has been shown to exist in humans; PAg appears to expand these cells preferentially.     

Epithelial marker genes are expressed in cultured embryonic rat lung and in vivo with similar spatial and temporal patterns

Explants of embryonic lung are often used to characterize lung growth, bronchial tree pattern, and cell differentiation. Most investigators culture lungs for 3-7 days in defined media lacking, e.g., added growth factors or hormones. If growth and differentiation are comparable to that in vivo, these cultures show considerable promise for identifying developmental regulatory molecules and target genes, and for elucidating molecular responses. We used in situ hybridization and RT-PCR to compare times and sites of expression of mRNAs of six epithelial genes in cultured and uncultured fetal rat lungs. These genes, expressed in distal lung of adult rats, are surfactant proteins (SP) A, B, and C; LAR, a receptor-type tyrosine phosphatase; Clara cell secretory protein (CC10, CCSP); and T1alpha. SP-A, SF-B, LAR, and CC10 are expressed by both Clara and Type II cells in adult animals. SP-C and T1alpha are unique markers for Type II and Type I cells, respectively. SP-C, LAR, and T1alpha are expressed before the lung is explanted (Day 13.5); SP-A, -B, and CC10 mRNAs are first detected later. The onset of expression is similar in vivo and in vitro. Although the patterns of expression differ for each mRNA, their sites of expression in culture match those in vivo relative to the bronchial tree. The explanted embryonic lung appears to be an excellent experimental model.     

Working Group Report 2: In situ caries models, saliva, microbiology, and statistical considerations

We present a case of a single coronary artery where the right coronary artery (RCA) arose from its proximal part. This rare anomaly was detected during elective coronary angiography in a patient with suspected coronary artery disease. The single coronary artery originated from the left sinus of valsalva, giving rise to RCA proximally and distally dividing into left anterior descending (LAD), ramus intermedius and left circumflex (LCX) arteries. The anginal symptoms in this patient was attributed to a significant stenosis at the proximal LAD which was subsequently dilated by coronary angioplasty. To the best of our knowledge, this is the first reported case of angioplasty of LAD in an anomalous single coronary artery.     

Slow eroding biodegradable multiblock poloxamer copolymers

Biodegradable multiblock poloxamers (BMPs) with gel duration of 8 h to several weeks were prepared by varying their molecular weights from 4000 to 40 000 g mol^?1. The molecular weight of the BMP was controlled by changing the poloxamer to coupling agent ratio. Assuming a micelle packing model of the BMP gel, as in the case of a poloxamer gel, the micelle properties and critical gel concentration of BMPs were investigated on the basis of the scaling concept. The findings suggest that the control of molecular weight by hydrolyzable groups can be a facile approach to optimize the gel properties for biomedical applications. Copyright © 2005 Society of Chemical Industry     

Design of software systems based on axiomatic design

The ability to utilize fully automated flexible manufacturing systems (FMS) or develop reliable computer-integrated manufacturing (CIM) systems will depend on our ability to develop reliable and reusable software for large complex systems on a timely basis. To date, software design has not gone very far beyond the ad hoc trial-and-error stage. Consequently, the development of software is slow, expensive, unreliable, and unmanageable. The purpose of this paper is to provide a scientific basis for designing software. The approach used here is that of axiomatic design, which is based on two design axioms: the Independence Axiom and the Information Axiom. The axiomatic approach is based on the recognition of the following common elements in design: the existence of independent domains (i.e. the consumer domain, the functional domain, the physical domain, and the process domain); the need to map between various domains during the design process; the decomposition of the characteristic vectors (i.e. functional requirements, design parameters, and process variables) in their respective domains; the zig-zagging required between the domains for decomposition; and the need to satisfy the design axioms during the design process. The axiomatic approach discussed in this paper provides decision making tools for software design in addition to systematic means of knowledge and data representation, synthesis and analysis of software, and the construction of the module-junction structure diagram.