Body effects on SAR distributions for microwave exposures in a realistic model of the human head.

The finite-difference time-domain (FDTD) simulations of specific absorption rate (SAR) in a human head exposed to microwaves have, to date, been carried out on models of the head only. This was because it was believed that the body effects on the average SAR of the head could be ignored at high frequencies of around 1 GHz. That opinion, however, was based on inappropriate calculation conditions and is therefore unreliable. In this paper, we have re-examined the body effects on the SAR distributions in a realistic homogeneous model of the adult head exposed to microwaves. We found that the SAR on the eye surface of the head-only model exposed to E-polarized waves was 31% smaller than that of the whole-body model at 900 MHz, and 43% larger at 1.5 GHz. For a size that can practically be considered whole-body, it is necessary to have the top of the head to the belly for 900 MHz and to the chest area for 1.5 GHz. The previously unclear body effects of H-polarized waves were assumed to be less than those of E-polarized waves, suggesting that the chest area would be sufficient for both frequencies.     

X gene and precore region mutations in the hepatitis B virus genome in persons positive for antibody to hepatitis B e antigen: comparison between asymptomatic "healthy" carriers and patients with severe chronic active hepatitis

Hepatitis B virus (HBV) carriers with antibody to hepatitis e antigen comprise asymptomatic carriers (ASCs), who have low replication levels of HBV, and patients with chronic active hepatitis (CAH), who have high levels of viral replication. To investigate whether defects in the X protein might be responsible for this difference in the level of viral replication, nucleotide sequences of X and precore gene regions in serum HBV were analyzed in 19 ASCs and 9 CAH patients. All patients had a point mutation creating a stop codon in the precore region. Seventeen ASCs (87.3%) had identical mutations consisting of 4 noncontiguous 1-bp deletions or an 8-bp deletion, both of which truncate the normal X protein, whereas no CAH patient had an X gene mutation (P < .001). Thus, deletion of the X protein might be responsible for the low levels of viral replication in ASCs.     

Successive overrelaxation method with projection for finite element solutions of nonlinear radiation cooling problems

In this paper, we consider the successive overrelaxation method with projection for obtaining the finite element solutions under the nonlinear radiation boundary conditions. In particular we establish the convergence of the successive overrelaxation method with projection. Some numerical results are also given to illustrate the usefulness.     

Occurrence of heterogeneity of N-linked oligosaccharides attached to sycamore (Acer pseudoplatanus L.) laccase after excretion

The N-linked oligosaccharide moieties of sycamore (Acer pseudoplatanus L.) laccase are known to be highly heterogeneous. We confirmed that this oligosaccharide heterogeneity was caused not only during the oligosaccharide biosynthesis in Golgi apparatus, but also after the excretion of laccase protein into a culture medium. The culture medium for the sycamore cells (Acer pseudoplatanus L.) contained beta-galactosidase, alpha-L-fucosidase, beta-N-acetylglucosaminidase, alpha-mannosidase and beta-xylosidase activities. We showed that the largest sugar chain in laccase, oligosaccharide F, [formula: see text] was degraded to [formula: see text] by a crude exoglycosidase mixture in the culture medium.     

Some experimental findings in compression-after-impact (CAI) tests of CF/PEEK (APC-2) and conventional CF/epoxy flat plates

Compression-after-impact (CAI) tests have been conducted for quasi-isotropic thick plates with 48 plies by using the NASA method and on plates with 32 plies by using the SACMA method. Specimens are made of CF/PEEK (APC-2) and conventional CF/epoxy for the NASA plates and CF/epoxy for the SACMA plates. In the NASA CAI tests, the sequence of delamination buckling and its propagation is clearly revealed through various experimental techniques. One major technique is moiré topography, and the other is thermo-mechanical stress analysis with a high-accuracy infrared sensor. The arrest of delamination propagation just before catastrophic failure due to high fracture toughness is clearly captured by the moiré camera. This behavior provides good CAI values of CF/PEEK. The initial buckling properties of the delaminated region by the impact are then extensively discussed. Numerical predictions of initial buckling stress have been obtained by modelled geometry of the delaminated region simplified from its precise structure clarified by ultrasonic C-scanning. They agree fairly well with the experimental results. The in-plane stress distribution in the delaminated region before initial buckling is measured by an infrared stress graphic system. This compared favorably with finite element predictions. Two types of symmetric buckling modes with respect to the central plate surface, twin and single peak ones, are experimentally captured.     

Characterization of temporal response, spectral responsivity and its spatial uniformity in photoconductive diamond detectors

Three photoconductive diamond detectors with highly oriented diamond (HOD) films fabricated by the same process were characterized with respect to temporal response, spectral responsivity and its spatial uniformity over the wavelength range from 190 to 250 nm. Temporal measurements showed a drift in the baseline, suggesting the presence of deep level carrier traps. The responsivity of specimen No. 2 was more than twice those of the other two specimens, but it showed an unpredictable current fluctuation. It was found that the spatial uniformities of all the specimens were too low for radiometric purposes. A prominent peak, thought to be due to photoemission, was found in the responsivity spatial distribution of specimen No. 3 under a negative applied voltage.     

An instantaneous response CMOS optical receiver IC with widedynamic range and extremely high sensitivity using feed-forwardauto-bias adjustment

An instantaneous response CMOS optical-receiver IC is described with wide input dynamic range and high sensitivity. In a TCM (time compression multiplexing)-TDMA (time division multiple access) fiber-optic subscriber system, a receiver should be able to handle burst-data packets with different amplitude. This requires quick response and a wide dynamic range. Instantaneous response is achieved with a new feed-forward auto-bias adjustment technique. In addition, multistaged offset compensation provides a wide dynamic range without any external elements and adjustments. Using these design techniques, an optical receiver IC was fabricated in a standard 0.8-μm CMOS technology. The receiver has a wide dynamic range of more than 25 dB for burst-mode optical input at 29 Mb/s. It has high transimpedance gain of 150 dBΩ and high sensitivity of -42 dBm with stable operation for FET threshold voltage and power supply voltage fluctuation     

Screening of Inhibitors Targeting Heat Shock Protein 47 Involved in the Development of Idiopathic Pulmonary Fibrosis

Heat shock protein 47 (HSP47), a collagen-specific molecular chaperone, is causally related to fibrotic diseases, including idiopathic pulmonary fibrosis. The identification of Compounds that interfere with the HSP47-collagen interaction is essential for the development of relevant therapeutics. Herein, we prepared human HSP47 as a soluble fusion protein expressed in E. coli and established an assay system for HSP47 inhibitor screening. We screened a natural and synthetic Compound library established at Nagasaki University. Among 1023 Compounds, 13 exhibited inhibitory activity against human HSP47, of which three inhibited its function in a dose-dependent manner. Epigallocatechin-3-O-gallate, one of these three Compounds, is a typical polyphenol Compound derived from tea leaves. Structurally related Compounds were synthesized and examined for their activity, revealing a hydroxyl group at A-ring position 5 as important for its activity. The present findings provide valuable insight for the development of natural product-derived therapeutics for fibrotic diseases, including idiopathic pulmonary fibrosis.